The emergence of industrial control networks for manufacturing control, diagnostics, and safety data

Proceedings of the IEEE

Volumn 95, Issue 1, 2007, Pages 29-47

  Moyne, James R ^a   Tilbury, Dawn M ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Diagnostic networks; E diagnostics; Industrial control networks; Manufacturing control; Network delay characterization; Network delay variability; Network performance; Networked control systems; Safety networks

Indexed keywords

ACCIDENT PREVENTION; DIGITAL STORAGE; DISTRIBUTED PARAMETER CONTROL SYSTEMS; MANUFACTURE; NETWORK PERFORMANCE; VISIBILITY;

E-DIAGNOSTICS; INDUSTRIAL CONTROLS; MANUFACTURING CONTROL; NETWORK DELAYS; SAFETY NETWORK;

NETWORKED CONTROL SYSTEMS;

EID: 40349105129     PISSN: 00189219     EISSN: None     Source Type: Journal    
DOI: 10.1109/JPROC.2006.887325     Document Type: Article

References (61)

1. J. Alanen, M. Hietikko, and T. Malm. (2004). "Safety of digital communications in machines," VTT Technical Res. Center Finland, Tech. Rep. VTT TiedotteitaVResearch Notes 2265. [Online]. Available: http://www.vtt.fi/inf/ pdf.
2. P. Antsaklis and J. Baillieul, Eds., "Special issue on networked control systems," IEEE Trans. Automat. Contr., vol. 49, no. 9, pp. 1421-1597, Sep. 2004.
3. AS-I Standard. (2005). [Online]. Available: http://www.as-interface.net.
4. D. Bertsekas and R. Gallager, Data Networks, 2nd ed. Englewood Cliffs, NJ: Prentice- Hall, 1992.
5. B. J. Casey, "Implementing Ethernet in the industrial environment," in Proc. IEEE Industry Applications Soc. Annu. Meeting, Seattle,WA, Oct. 1990, vol. 2, pp. 1469-1477.
6. J.-D. Decotignie, "Ethernet-based real-time and industrial communications," Proc. IEEE, vol. 93, no. 6, pp. 1102-1118, Jun. 2005.
7. DeviceNet Specifications, 1997.
8. L. Dugyard and E. I. Verriest, Stability and Control of Time-Delay Systems. New York: Springer, 1998.
9. A. Duschau-Wicke, "Wireless monitoring and integration of control networks using OPC," NSF Eng. Res. Center Reconfigurable Manufacturing Systems, Univ. Michigan, Tech. Rep., 2004, Studienarbeit report for Technische Universitat Kaiserslautern.
10. D. Dzung, M. Naedele, T. P. Von Hoff, and M. Crevatin, "Security for industrial communication systems," Proc. IEEE, vol. 93, no. 6, pp. 1152-1177, Jun. 2005.
11. M.-Y. Chow, Ed., "Special section on distributed network-based control sytems and applications," IEEE Trans. Indust. Electron., vol. 51, no. 6, pp. 1126-1279, Dec. 2004.
12. J. Eidson and W. Cole, "Ethernet rules closed-loop system," InTech, pp. 39-42, Jun. 1998.
13. Railway ApplicationsVCommunication, Signalling and Processing Systems Part 1: Safety-Related Communication in Closed Transmission Systems, Irish Standard EN 50159-1, 2001.
14. M. Felser, "Real-time EthernetVIndustry prospective," Proc. IEEE, vol. 93, no. 6, pp. 1118-1129, Jun. 2005.
15. M. Felser and T. Sauter, "The fieldbus war: History or short break between battles? " in Proc. IEEE Int. Workshop Factory Communication Systems (WFCS), Västera°s, Sweden, Aug. 2002, pp. 73-80.
16. -, "Standardization of industrial EthernetVThe next battlefield?" in Proc. IEEE Int. Workshop Factory Communication Systems (WFCS), Vienna, Austria, Sep. 2004, pp. 413-421.
17. M. Fondl. (2003, Sep. 16). "Network diagnostics for industrial Ethernet," in The Industrial Ethernet Book. [Online]. Available: http://ethernet.industrial-networking.com.
18. G. F. Franklin, J. D. Powell, and A. Emani-Naeini, Feedback Control of Dynamic Systems, 3rd ed. Reading, MA: Addison-Wesley, 1994.
19. G. F. Franklin, J. D. Powell, and M. L. Workman, Digital Control of Dynamic Systems, 3rd ed. Boston, MA: Addison-Wesley, 1998.
20. Grid Connect. Grid Connect Fieldbus Comparison Chart. [Online]. Available: http://www.synergetic.com/compare.htm.
21. D. W. Holley, "Understanding and usingOPC for maintenance and reliability applications," IEE Computing Contr. Eng., vol. 15, no. 1, pp. 28-31, Feb./Mar. 2004.
22. "IEC standard redefines safety systems," InTech, vol. 50, no. 7, pp. 25-26, Jul. 2003.
23. IEEE. (2002). 1588: Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems. [Online]. Available: http://ieee1588.nist.gov.
24. Amer. Nat. Standards Inst., OSI Basic Reference Model, ANSI, ISO/7498, 1984.
25. International SEMATECH. (2004, Apr.). Proc. Int. SEMATECH e-Manufacturing/ e-Diagnostics Workshop. [Online]. Available: http://ismi.sematech.org/emanufacturing/meetings/20040419/index.htm.
26. H. Kaghazchi and D. Heffernan. (2004). "Development of a gateway to PROFIBUS for remote diagnostics," in PROFIBUS Int. Conf., Warwickshire, U.K. [Online]. Available: http://www.ul.ie/̃arc/techreport.html.
27. S. A. Koubias and G. D. Papadopoulos, "Modern fieldbus communication architectures for real-time industrial applications," Comput. Industry, vol. 26, pp. 243-252, Aug. 1995.
28. K. C. Lee and S. Lee, "Performance evaluation of switched Ethernet for networked control systems," in Proc. IEEE Conf. Industrial Electronics Soc., Nov. 2002, vol. 4, pp. 3170-3175.
29. F.-L. Lian, J. R. Moyne, and D. M. Tilbury, "Performance evaluation of control networks: Ethernet, ControlNet, and DeviceNet," IEEE Control Syst. Mag., vol. 21, no. 1, pp. 66-83, Feb. 2001.
30. F.-L. Lian, J. R. Moyne, D. M. Tilbury, and P. Otanez, "A software toolkit for design and optimization of sensor bus systems in semiconductor manufacturing systems," in Proc. AEC/APC Symp. XIII, "anff, Canada, Oct. 2001.
31. F.-L. Lian, J. R. Moyne, and D. M. Tilbury, "Network design consideration for distributed Control systems," IEEE Trans. Contr. Syst. Technol., vol. 10, no. 2, pp. 297-307, Mar. 2002.
32. P. S. Marshall, "A comprehensive guide to industrial networks: Part 1," Sensors Mag., vol. 18, no. 6, Jun. 2001.
33. P. Martí, J. Yépez, M. Velasco, R. Villà, and J. M. Fuertes, "Managing quality-of-control in network-based control systems by controller and message scheduling co-design," IEEE Trans. Industrial Electron., vol. 51, no. 6, Dec. 2004.
34. G. A. Mintchell, "OPC integrates the factory floor," Control Eng., vol. 48, no. 1, pp. 39, Jan. 2001.
35. J. Montague, "Safety networks up and running," Contr. Eng., vol. 51, no. 12, Dec. 2004.
36. -, "Networks busting out all over," Contr. Eng., vol. 52, no. 3, Mar. 2005.
37. J. Moyne, J. Korsakas, and D. M. Tilbury, "Reconfigurable factory testbed (RFT): A distributed testbed for reconfigurable manufacturing systems," in Proc. JapanVU.S.A. Symp. Flexible Automation. Denver, CO: Amer. Soc. Mechanical Engineers (ASME), Jul. 2004.
38. J. Moyne and F. Lian, "Design considerations for a sensor bus system in semiconductor manufacturing," in Proc. Int. SEMATECH AEC/APC Workshop XII, Sep. 2000.
39. J. R. Moyne, N. Najafi, D. Judd, and A. Stock, "Analysis of sensor/actuator bus interoperability standard alternatives for semiconductor manufacturing," in Sensors Expo Conf. Proc., Cleveland, OH, Sep. 1994.
40. J. Moyne, P. Otanez, J. Parrott, D. Tilbury, and J. Korsakas, "Capabilities and limitations of using Ethernet-based networking technologies in APC and e-diagnostics applications," in Proc. SEMATECH AEC/APC Symp. XIV, Snowbird, UT, Sep. 2002.
41. J. Moyne, D. Tilbury, and H. Wijaya, "An event-driven resource-based approach to high-level reconfigurable logic control andits application to a reconfigurable factory testbed," in Proc. CIRP Int. Conf. Reconfigurable Manufacturing Systems, Ann Arbor, MI, 2005.
42. [Online]. Available: http://www.opcfoundation.org.
43. OPC DA 3.00 Specification. OPC Foundation. (2003, Mar.). [Online]. Available: http://www.opcfoundation.org.
44. P. G. Otanez, J. R. Moyne, and D. M. Tilbury, "Using deadbands to reduce communication in networked control systems," in Proc. Amer. Control Conf., Anchorage, AK, ay 2002, pp. 3015-3020.
45. P. G. Otanez, J. T. Parrott, J. R. Moyne, and D. M. Tilbury, "The implications of Ethernet as a control network," in Proc. Global Powertrain Congr., Ann Arbor, MI, Sep. 2002.
46. J. T. Parrott, J. R. Moyne, and D. M. Tilbury, "Experimental determination of network quality of service in Ethernet: UDP, OPC, and VPN," in Proc. Amer. Control Conf., 2006.
47. G. Paula, "Java catches on for manufacturing," Mechanical Eng., vol. 119, no. 12, pp. 80-82, Dec. 1997.
48. PROFIBUS Standard, IEC 61158 type 3 and IEC 61784. [Online]. Available: http://www.profibus.com.
49. K. K. Ramakrishnan and H. Yang, "The thernet capture effect: Analysis and solution," in Proc. 19th Conf. Local Computer Networks, Minneapolis, MN, Oct. 1994, pp. 228-240.
50. J.-P. Richard, "Time-delay systems: An overview of some recent advances and open problems," Automatica, vol. 39, no. 10, pp. 1667-1694, 2003.
51. A. Shah and A. Raman. (2003, Jul.). "Factory network analysis," in Proc. Int. SEMATECH e-Diagnostics and EEC Workshop. [Online]. Available: http://ismi.sematech.org/emanufacturing/meetings/20030718/index.htm.
52. B. Shetler, "OPC in manufacturing," Manufacturing Eng., vol. 130, no. 6, Jun. 2003.
53. P. Sink, "Industrial Ethernet: The death knell of fieldbus?" Manufacturing Automation Mag., Apr. 1999.
54. S. Soucek and T. Sauter, "Quality of service concerns in IP-based control systems," IEEE Trans. Indust. Electron., vol. 51, pp. 1249-1258, Dec. 2004.
55. A. S. Tanenbaum, Computer Networks, 3rd ed. Upper Saddle River, NJ: Prentice-Hall, 1996.
56. J.-P. Thomesse, "Fieldbus technology in industrial automation," Proc. IEEE, vol. 93, no. 6, pp. 1073-1101, Jun. 2005.
57. A. Treytl, T. Sauter, and C. Schwaiger, "Security measures for industrial fieldbus systemsVState of the art and solutions for IP-based approaches," in Proc. IEEE Int. Workshop Factory Communication Systems (WFCS), Vienna, Austria, Sep. 2004, pp. 201-209.
58. E. Vonnahme, S. Ruping, and U. Ruckert, "Measurements in switched Ethernet networks used for automation systems," in Proc. IEEE Int. Workshop Factory Communication Systems, Sep. 2000, pp. 231-238.
59. K. Watanabe, E. Nobuyama, and A. Kojima, "Recent advances in control of time delay systemsVA tutorial review," in Proc. IEEE Conf. Decision and Control, 1996, pp. 2083-2088.
60. J. D. Wheelis, "Process control communications: Token bus, CSMA/CD, or token ring?" ISA Trans., vol. 32, no. 2, pp. 193-198, Jul. 1993.
61. A. Willig, K. Matheus, and A. Wolisz, "Wireless technology in industrial networks," Proc. IEEE, vol. 93, no. 6, pp. 1130-1151, Jun. 2005.