-
1
-
-
33846662336
-
Artificial neural network modelling of the tensile properties of indigenously developed 15Cr- 15Ni-2.2Mo-Ti modified austenitic stainless steel
-
Sivaprasad, P.V.; Mandal, S.; Venugopal, S.; Narayanan, C.; Shanmugam, V.; Raj, B. Artificial neural network modelling of the tensile properties of indigenously developed 15Cr- 15Ni-2.2Mo-Ti modified austenitic stainless steel. Trans. Indian Institute of Metals 2006, 59, 437-445.
-
(2006)
Trans. Indian Institute of Metals
, vol.59
, pp. 437-445
-
-
Sivaprasad, P.V.1
Mandal, S.2
Venugopal, S.3
Narayanan, C.4
Shanmugam, V.5
Raj, B.6
-
3
-
-
36549044328
-
Characterisation of microstructural evolution during thermomechanical processing of 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel (alloy D9) using ultrasonic measurements
-
DOI 10.1179/174328407X161097
-
Mandal, S.; Sivaprasad, P.V.; Dube, R.K. Kinetics, mechanism and modelling of microstructural evolution during thermomechanical processing of a 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel. J. Mater. Sci. 2007, 42, 2724. (Pubitemid 350189803)
-
(2007)
Materials Science and Technology
, vol.23
, Issue.11
, pp. 1381-1386
-
-
Mandal, S.1
Kumar, A.2
Sivaprasad, P.V.3
Jayakumar, T.4
Raj, B.5
-
4
-
-
0002342092
-
Necklace formation during dynamic recrystallization: Mechanisms and impact on flow behavior
-
PII S1359645497002334
-
Ponge, D.; Gottstein, G. Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior. Acta Mater. 1998, 46, 69-80. (Pubitemid 128429093)
-
(1998)
Acta Materialia
, vol.46
, Issue.1
, pp. 69-80
-
-
Ponge, D.1
Gottstein, G.2
-
5
-
-
46049096607
-
Thermomechanical processing of metallic materials
-
Cahn, R.W., Ed.; Amsterdam: Elsevier
-
Verlinden, B.; Driver, J.; Samajdar, I.; Doherty, R.D. Thermomechanical processing of metallic materials. In Pergamon Materials Series; Cahn, R.W., Ed.; Amsterdam: Elsevier, 2007.
-
(2007)
Pergamon Materials Series
-
-
Verlinden, B.1
Driver, J.2
Samajdar, I.3
Doherty, R.D.4
-
6
-
-
0032058295
-
Nucleation mechanisms of dynamic recrystallization in austenitic steel alloy 800H
-
PII S1359646298001249
-
Brunger, E.; Wang, X.; Gottstein, G. Nucleation mechanisms of dynamic recrystallization in austenitic steel alloy 800H. Scripta Mater. 1998, 38, 1843-1849. (Pubitemid 128426314)
-
(1998)
Scripta Materialia
, vol.38
, Issue.12
, pp. 1843-1849
-
-
Brunger, E.1
Wang, X.2
Gottstein, G.3
-
7
-
-
46049087117
-
Evolution and characterization of dynamically recrystallized microstructure in a titanium modified austenitic stainless steel using ultrasonic and EBSD techniques
-
Mandal, S.; Kumar, S.; Kumar, A.; Samajdar, I.; Sivaprasad, P.V.; Jayakumar, T.; Raj, B. Evolution and characterization of dynamically recrystallized microstructure in a titanium modified austenitic stainless steel using ultrasonic and EBSD techniques. Phil. Mag. 2008, 88 (6), 883-897.
-
(2008)
Phil. Mag.
, vol.88
, Issue.6
, pp. 883-897
-
-
Mandal, S.1
Kumar, S.2
Kumar, A.3
Samajdar, I.4
Sivaprasad, P.V.5
Jayakumar, T.6
Raj, B.7
-
8
-
-
0037190931
-
Resistance to sensitization and intergranular corrosion through extreme randomization of grain boundaries
-
DOI 10.1016/S1359-6454(02)00306-3, PII S1359645402003063
-
Wasnik, D.N.; Kain, V.; Samajdar, I.; Verlinden, B.; De, P.K. Resistance to sensitization and intergranular corrosion through extreme randomization of grain boundaries. Acta Mater. 2002, 50, 4587-4601. (Pubitemid 35152291)
-
(2002)
Acta Materialia
, vol.50
, Issue.18
, pp. 4587-4601
-
-
Wasnik, D.N.1
Kain, V.2
Samajdar, I.3
Verlinden, B.4
De, P.K.5
-
10
-
-
34548674407
-
The structure of high-angle grain boundaries
-
Brandon, D.G. The structure of high-angle grain boundaries. Acta Metall. 1966, 14, 1479-1484.
-
(1966)
Acta Metall.
, vol.14
, pp. 1479-1484
-
-
Brandon, D.G.1
-
11
-
-
34249944891
-
The role of annealing twins during recrystallization of Cu
-
Field, D.P.; Bradford, L.T.; Nowell, M.M.; Lillo, T.M. The role of annealing twins during recrystallization of Cu. Acta Mater. 2007, 55, 4233-4241.
-
(2007)
Acta Mater.
, vol.55
, pp. 4233-4241
-
-
Field, D.P.1
Bradford, L.T.2
Nowell, M.M.3
Lillo, T.M.4
-
12
-
-
34047110783
-
Heterogeneous deformation in singlephase Zircaloy 2.
-
Sahoo, S.K.; Hiwarkar, V.D.; Samajdar, I.; Dey, G.K.; Srivastav, D.; Tiwari, R.; Banerjee, S. Heterogeneous deformation in singlephase Zircaloy 2. Scripta Mater. 2007, 56, 963-966.
-
(2007)
Scripta Mater.
, vol.56
, pp. 963-966
-
-
Sahoo, S.K.1
Hiwarkar, V.D.2
Samajdar, I.3
Dey, G.K.4
Srivastav, D.5
Tiwari, R.6
Banerjee, S.7
-
13
-
-
36549006570
-
Evaluation of intragranular misorientation parameters measured by EBSD in a hot worked austenitic stainless steel
-
DOI 10.1111/j.1365-2818.2007.01850.x
-
Jorge-Badiola, D.; Iza-Mendia, A.; Gutierrez, I. Evaluation of intragranular misorientation parameters measured by EBSD in a hot worked austenitic stainless steel. J. Microscopy 2007, 228 (3), 373. (Pubitemid 350191117)
-
(2007)
Journal of Microscopy
, vol.228
, Issue.3
, pp. 373-383
-
-
Jorge-Badiola, D.1
Iza-Mendia, A.2
Gutierrez, I.3
-
14
-
-
0036952028
-
Local strain heterogeneities after cold rolling of an ultra low carbon steel
-
Verbeken, K.; Kestens, L. Local strain heterogeneities after cold rolling of an ultra low carbon steel. Mater. Sci. Forum 2002, 408-412, 559-564.
-
(2002)
Mater. Sci. Forum
, vol.408-412
, pp. 559-564
-
-
Verbeken, K.1
Kestens, L.2
-
15
-
-
17944364463
-
Study by EBSD of the development of the substructure in a hot deformed 304 stainless steel
-
DOI 10.1016/j.msea.2004.11.049, PII S0921509304013942
-
Jorge-Badiola, D.; Iza-Mendia, A.; Gutierrez, I. Study by EBSD of the development of the substructure in a hot deformed 304 stainless steel. Mater. Sci. Eng. A 2005, 394, 445-454. (Pubitemid 40599296)
-
(2005)
Materials Science and Engineering A
, vol.394
, Issue.1-2
, pp. 445-454
-
-
Jorge-Badiola, D.1
Iza-Mendia, A.2
Gutierrez, I.3
-
16
-
-
0032854102
-
Quantitative metallography by electron backscattered diffraction
-
DOI 10.1046/j.1365-2818.1999.00578.x
-
Humphreys, F.J. Quantitative metallography by electron backscattered diffraction. J. Microscopy 1999, 195 (3), 170-185. (Pubitemid 29444728)
-
(1999)
Journal of Microscopy
, vol.195
, Issue.3
, pp. 170-185
-
-
Humphreys, F.J.1
-
17
-
-
34548331868
-
Recrystallization behaviour of the nickel-based alloy 80 a during hot forming
-
DOI 10.1111/j.1365-2818.2007.01810.x
-
Mitsche, S.; Poelt, P.; Sommitsch, C. Recrystallization behaviour of the nickel-based alloy 80 A during hot forming. J. Microscopy 2007, 227, 267-274. (Pubitemid 47339678)
-
(2007)
Journal of Microscopy
, vol.227
, Issue.3
, pp. 267-274
-
-
Mitsche, S.1
Poelt, P.2
Sommitsch, C.3
-
18
-
-
0021477788
-
On the distribution of ε for grain boundaries in polycrystalline nickel prepared by strain annealing technique
-
DOI 10.1016/0001-6160(84)90124-X
-
Lim, L.C.; Raj, R. On the distribution of ε for grain boundaries in polycrystalline nickel prepared by strain annealing technique. Acta Metall. 1984, 32, 1177-1181. (Pubitemid 14642604)
-
(1984)
Acta Metallurgica
, vol.32
, Issue.8
, pp. 1177-1181
-
-
Lim, L.C.1
Raj, R.2
-
19
-
-
0014616933
-
The formation of annealing twins
-
Gleiter, H. The formation of annealing twins. Acta Metall. 1969, 17, 1421-1428.
-
(1969)
Acta Metall.
, vol.17
, pp. 1421-1428
-
-
Gleiter, H.1
-
20
-
-
42949108243
-
Microstructure evolution during dynamic recrystallization of hot deformed superalloy 718
-
DOI 10.1016/j.msea.2007.09.008, PII S0921509307016401
-
Wang, Y.; Shao, W.Z.; Zhen, L.; Zhang, X.M. Microstructure evolution during dynamic recrystallization of hot deformed superalloy 718. Mater. Sci. Eng. A 2008, 486, 321-332. (Pubitemid 351606859)
-
(2008)
Materials Science and Engineering A
, vol.486
, Issue.1-2
, pp. 321-332
-
-
Wang, Y.1
Shao, W.Z.2
Zhen, L.3
Zhang, X.M.4
-
21
-
-
0037204054
-
Nucleation and microtexture development under dynamic recrystallization of copper
-
DOI 10.1016/S0921-5093(01)01336-3, PII S0921509301013363
-
Wusatowska-Sarnek, A.M.; Miura, H.; Sakai, T. Nucleation and microtexture development under dynamic recrystallization of copper. Mater. Sci. Eng. A 2002, 323, 177-186. (Pubitemid 34140464)
-
(2002)
Materials Science and Engineering A
, vol.323
, Issue.1-2
, pp. 177-186
-
-
Wusatowska-Sarnek, A.M.1
Miura, H.2
Sakai, T.3
|