Utilization of W/Mg(NO3)2 modifiers for the direct determination of As and Sb in soils, sewage sludge and sediments by solid sampling electrothermal atomic absorption spectrometry

Spectrochimica Acta - Part B Atomic Spectroscopy

Volumn 65, Issue 4, 2010, Pages 291-296

  Török, Peter ^a   Žemberyová, Mária ^a  

^a Physics and Informatics   (Slovakia)

Author keywords

Antimony; Arsenic; Sediment; Sewage sludge; Soil

Indexed keywords

ANALYTICAL PROCEDURE; CERTIFIED REFERENCE MATERIALS; CERTIFIED VALUES; DETECTION LIMITS; DIRECT DETERMINATION; ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRY; ENVIRONMENTAL SAMPLE; EXPERIMENTAL CONDITIONS; IN-SITU; MATRIX; MATRIX MODIFIERS; PALLADIUM MODIFIER; QUANTIFICATION LIMIT; RESONANCE LINE; SIMPLE METHOD; SOLID MATRIXES; SOLID SAMPLING; SPECIFIC ABSORPTION; SPECTRAL INTERFERENCE;

ABSORPTION; ABSORPTION SPECTROSCOPY; ALUMINUM COMPOUNDS; ANTIMONY; ARSENIC; ARSENIC COMPOUNDS; ATOMIC ABSORPTION SPECTROMETRY; DIFFUSERS (OPTICAL); IRON COMPOUNDS; MAGNESIUM; PALLADIUM; SEDIMENTOLOGY; SEDIMENTS; SEWAGE SLUDGE; SILICON COMPOUNDS; SOILS; TUNGSTEN;

ANTIMONY COMPOUNDS;

EID: 77951139871     PISSN: 05848547     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.sab.2010.03.007     Document Type: Article

References (39)

1. Iffland R. In: Seiler H.G., Sigel A., and Sigel H. (Eds). Handbook on Metals in Clinical and Analytical Chemistry (1994), Marcel Dekker, New York 237-253
2. Mandal B.K., and Suzuki K.T. Arsenic round the world: a review. Talanta 58 (2002) 201-235
3. Stockwell P.B., Corns W.T., and Allen J. 25 years experience of vapour generation techniques for quantifying trace levels of mercury, arsenic, selenium and antimony in a range of environmental samples. J. Anal. At. Spectrom. 24 (2009) 1026-1033
4. Kempton S., Sterritt R.M., and Lester J.N. Atomic-absorption spectrophotometric determination of antimony, arsenic, bismuth, tellurium, thallium and vanadium in sewage sludge. Talanta 29 (1982) 675-681
5. De Gregori I., Pinochet H., Fuentes E., and Potin-Gautier M. Determination of antimony in soils and vegetables by hydride generation atomic fluorescence spectrometry and electrothermal atomic absorption spectrometry. Optimization and comparison of both analytical techniques. J. Anal. At. Spectrom. 16 (2001) 172-178
6. Hudson-Edwards K.A., Houghton S.L., and Osborn A. Extraction and analysis of arsenic in soils and sediments. Trends Anal. Chem. 23 (2004) 745-752
7. Torres D.P., Vieira M.A., Ribeiro A.S., and Curtius A.J. Slurry sampling for arsenic determination in sediments by hydride generation atomic absorption spectrometry. J. Braz. Chem. Soc. 18 (2007) 728-732
8. Lopez-Garcia I., Sanchez-Merlos M., and Herndndez-Cordoba M. Arsenic and antimony determination in soils and sediments by graphite furnace atomic absorption spectrometry with slurry sampling. Spectrochim. Acta, Part B 52 (1997) 437-443
9. Matusiewicz H., and Mroczkowska M. Hydride generation from slurry samples after ultrasonication and ozonation for the direct determination of trace amounts of As(III) and total inorganic arsenic by their in situ trapping followed by graphite furnace atomic absorption spectrometry. J. Anal. At. Spectrom. 18 (2003) 751-761
10. Beccaloni E., Musmeci L., and Stacul E. Determination of As in environmental solid matrix. Anal. Bioanal. Chem. 374 (2002) 1230-1236
11. Vassileva E., Dočekalova H., Baeten H., Vanhentenrijk S., and Hoenig M. Revisitation of mineralization modes for arsenic and selenium determinations in environmental samples. Talanta 54 (2001) 187-196
12. Potts P.J. Handbook of Silicate Rock Analysis (1987), Blackie, Glasgow
13. Vale M.G.R., Oleszczuk N., and dos Santos W.N.L. Current status of direct solid sampling for electrothermal atomic absorption spectrometry - a critical review of the development between 1995 and 2005. Appl. Spectrosc. Rev. 41 (2006) 377-400
14. Welz B., Borges D.L.G., Lepri F.G., Vale M.G.R., and Heitmann U. High-resolution continuum source electrothermal atomic absorption spectrometry - an analytical and diagnostic tool for trace analysis. Spectrochim. Acta, Part B 62 (2007) 873-883
15. Welz B., Vale M.G.R., Borges D.L.G., and Heitmann U. Progress in direct solid sampling analysis using line source and high-resolution continuum source electrothermal atomic absorption spectrometry. Anal. Bioanal. Chem. 389 (2007) 2085-2095
16. Maia S.M., Welz B., Ganzarolli E., and Curtius A.J. Feasibility of eliminating interferences in graphite furnace atomic absorption spectrometry using analyte transfer to the permanently modified graphite tube surface. Spectrochim. Acta, Part B 57 (2002) 473-484
17. Cal-Prieto M.J., Carlosena A., Andrade J.M., Muniategui S., Lopez-Mahia P., Fernandez E., and Prada D. Development of an analytical scheme for the direct determination of antimony in geological materials by automated ultrasonic slurry sampling-ETAAS. J. Anal. At. Spectrom. 14 (1999) 703-710
18. Cal-Prieto M.J., Carlosena A., Andrade J.M., Lopez-Mahia P., Muniategui S., and Prada D. Tube ageing as an important quality factor in the direct determination of Sb in solid samples by ultrasonic slurry sampling-GFAAS. J. Anal. At. Spectrom. 18 (2003) 29-37
19. Felipe-Sotelo M., Cal-Prieto M.J., Gomez-Carracedo M.P., Andrade J.M., Carlosena A., and Prada D. Handling complex effects in slurry-sampling-electrothermal atomic absorption spectrometry by multivariate calibration. Anal. Chim. Acta 571 (2006) 315-323
20. Sahuquillo A., Rauret G., Rehnert A., and Muntau H. Solid sample graphite furnace atomic absorption spectroscopy for supporting arsenic determination in sediments following a sequential extraction procedure. Anal. Chim. Acta 476 (2003) 15-24
21. Mierzwa J., and Sun Y.-C. Determination of antimony in sediments by Zeeman-corrected electrothermal atomic absorption spectrometry with ultrasonic slurry sampling. J. Chin. Chem. Soc. 45 (1998) 821-825
22. 2 compensation. At. Spectrosc. 21 (2000) 93-99
23. Barciela-Alonso M.C., Varela-Vilela R., Peña-Vázquez E., Bermejo-Barrera A., and Bermejo-Barrera P. Antimony determination in marine sediments by graphite furnace atomic absorption spectrometry with slurry sampling. At. Spectrosc. 28 (2007) 102-107
24. Araujoa R.G.O., Welz B., Vignola F., and Becker-Ross H. Correction of structured molecular background by means of high-resolution continuum source electrothermal atomic absorption spectrometry - determination of antimony in sediment reference materials using direct solid sampling. Talanta 80 (2009) 846-852
25. Barbosa Jr. F., Lima E.C., and Krug F.J. Determination of arsenic in sediment and soil slurries by electrothermal atomic absorption spectrometry using W-Rh permanent modifier. Analyst 125 (2000) 2079-2083
26. L'vov B.V. Mechanism of action of a palladium modifier. Spectrochim. Acta, Part B 55 (2000) 1659-1668
27. Schlemmer G., and Welz B. Palladium and magnesium nitrates, a more universal modifier for graphite furnace atomic absorption spectrometry. Spectrochim. Acta, Part B 41 (1986) 1157-1165
28. Volynsky A.B. Comparative efficiency of platinum group metal modifiers in electrothermal atomic absorption spectrometry. Spectrochim. Acta, Part B 59 (2004) 1799-1821
29. Lima E.C., and Brasil J.L. Determination of antimony in environmental samples by ETAAS using different permanent modifiers. Microchim. Acta 146 (2004) 21-29
30. Friese K.Ch., and Krivan V. A solid-sampling system for a transversely heated graphite furnace and its application to trace element analysis of high-purity tantalum powders by atomic absorption spectrometry. Spectrochim. Acta, Part B 53 (1998) 1069-1078
31. Belarra M.A., Crespo C., Resano M., and Castillo J.R. Direct determination of copper and lead in sewage sludge by solid sampling-graphite furnace atomic absorption spectrometry - study of the interference reduction in the gaseous phase working innon-stop flow conditions. Spectrochim. Acta, Part B 55 (2000) 865-874
32. Belarra M.A., Crespo C., Marti{dotless}nez-Garbayo M.P., and Resano M. Direct determination of cobalt and zinc in samples of different volatility by means of solid sampling-graphite furnace atomic absorption spectrometry. Spectrochim. Acta, Part B 58 (2003) 1847-1858
33. da Silva J.B.B., Bertilia M., Giacomelli O., de Souza I.G., and Curtius A.J. Iridium and rhodium as permanent chemical modifiers for the determination of Ag, As, Bi, Cd, and Sb by electrothermal atomic absorption spectrometry. Microchem. J. 60 (1998) 249-257
34. Minami H., Zhang Q., Itoh H., and Atsuya I. Direct determination of chromium in biological materials by solid-sampling atomic absorption spectrometry: application of three-point estimation-standard addition method. Microchem. J. 49 (1994) 126-135
35. Bendicho C., and de Loos-Vollebregt M.T.C. The influence of pyrolysis and matrix modifiers for analysis of glass materials by GFAAS using slurry sample introduction. Spectrochim. Acta, Part B 45 (1990) 679-693
36. Damin I.C.F., Silva M.M., Vale M.G.R., and Welz B. Feasibility of using direct determination of cadmium and lead in fresh meat by electrothermal atomic absorption spectrometry for screening purposes. Spectrochim. Acta, Part B 62 (2007) 1037-1045
37. Nomura C.S., Silva C.S., Nogueira A.R.A., and Oliviera P.V. Bovine liver sample preparation and micro-homogeneity study for Cu and Zn determination by solid sampling electrothermal atomic absorption spectrometry. Spectrochim. Acta, Part B 60 (2005) 673-680
38. In: Kurfürst U. (Ed). Solid Sample Analysis-Direct and Slurry Sampling Using GF-AAS and ETV-ICP (1998), Springer, Berlin
39. Currie L.A. Nomenclature in evaluation of analytical methods including detection and quantification capabilities. Anal. Chim. Acta 391 (1999) 105