Influence of the cementing technique on the cement mantle in hip resurfacing: An in vitro computed tomography scan-based analysis

Journal of Bone and Joint Surgery

Volumn 92, Issue 2, 2010, Pages 375-387

  Scheerlinck, Thierry ^a   Delport, Hendrik ^b   Kiewitt, Thomas ^c  

^a UNIVERSITY HOSPITAL BRUSSELS   (Belgium)

^b AZ Nikolaas   (Belgium)

^c Biomet Deutschland   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

BONE CEMENT; GENTAMICIN BONE CEMENT;

ANIMAL TISSUE; ARTICLE; BONE DENSITY; COMPOSITE MATERIAL; COMPUTER ASSISTED TOMOGRAPHY; COMPUTER PROGRAM; COW; FEMUR CONDYLE; FEMUR HEAD; FEMUR HEAD PROSTHESIS; HIP ARTHROPLASTY; HIP RESURFACING ARTHROPLASTY; IMPLANT; IN VIVO STUDY; NONHUMAN; PRIORITY JOURNAL; SURGICAL TECHNIQUE; VISCOSITY; ADHESION; ANIMAL; CATTLE; CEMENTATION; COMPUTER SIMULATION; EQUIPMENT; HIP PROSTHESIS; MATERIALS TESTING; METHODOLOGY; SURFACE PROPERTY; SUTURE ANCHOR;

ADHESIVENESS; ANIMALS; ARTHROPLASTY, REPLACEMENT, HIP; BONE CEMENTS; CATTLE; CEMENTATION; COMPUTER SIMULATION; EQUIPMENT FAILURE ANALYSIS; HIP PROSTHESIS; MATERIALS TESTING; SURFACE PROPERTIES; SUTURE ANCHORS; TOMOGRAPHY, X-RAY COMPUTED;

EID: 77950463087     PISSN: 00219355     EISSN: 15351386     Source Type: Journal    
DOI: 10.2106/JBJS.I.00322     Document Type: Article

References (35)

1. Morlock MM, Bishop N, Ruther W, Delling G, Hahn M. Biomechanical, morphological, and histological analysis of early failures in hip resurfacing arthroplasty. Proc Inst Mech Eng H. 2006;220:333-44.
2. Campbell P, Beaulé PE, Ebramzadeh E, Le Duff M, De Smet K, Lu Z, Amstutz HC. A study of implant failure in metal-on-metal surface arthroplasties. Clin Orthop Relat Res. 2006;453:35-46.
3. Amstutz HC. Present state of metal-on-metal hybrid hip resurfacing. J Surg Orthop Adv. 2008;17:12-6.
4. Breer S, Krause M, Hahn M, Rüther W, Sauter G, Zustin J, Morlock MM, Amling M. Early and intermediate failure of 170 femoral components in hip resurfacing arthroplasty: histomorphometric analysis of bone structure and cementing under the resurfacing component. Trans Orthop Res Soc. 2008; 33:231.
5. Morlock MM, Bishop N, Zustin J, Hahn M, Ruther W, Amling M. Modes of implant failure after hip resurfacing: morphological and wear analysis of 267 retrieval specimens. J Bone Joint Surg Am. 2008;90 Suppl 3:89-95.
6. Beaulé PE, Campbell P, Lu Z, Leunig-Ganz K, Beck M, Leunig M, Ganz R. Vascularity of the arthritic femoral head and hip resurfacing. J Bone Joint Surg Am. 2006;88 Suppl 4:85-96. (Pubitemid 44901977)
7. Siebel T, Maubach S, Morlock MM. Lessons learned from early clinical experience and results of 300 ASR hip resurfacing implantations. Proc Inst Mech Eng H. 2006;220:345-53.
8. Chandler M, Kowalski RS, Watkins ND, Briscoe A, New AM. Cementing techniques in hip resurfacing. Proc Inst Mech Eng H. 2006;220:321-31.
9. Little CP, Ruiz AL, Harding IJ, McLardy-Smith P, Gundle R, Murray DW, Athanasou NA. Osteonecrosis in retrieved femoral heads after failed resurfacing arthroplasty of the hip. J Bone Joint Surg Br. 2005;87:320-3.
10. Amstutz HC, Campbell PA, Le Duff MJ. Fracture of the neck of the femur after surface arthroplasty of the hip. J Bone Joint Surg Am. 2004;86:1874-7.
11. Falez F, Favetti F, Casella F, Panegrossi G. Hip resurfacing: why does it fail? Early results and critical analysis of our first 60 cases. Int Orthop. 2008;32: 209-16.
12. Howie DW, Cornish BL, Vernon-Roberts B. Resurfacing hip arthroplasty. Classification of loosening and the role of prosthesis wear particles. Clin Orthop Relat Res. 1990;255:144-59.
13. Duijsens AW, Keizer S, Vliet-Vlieland T, Nelissen RG. Resurfacing hip prostheses revisited: failure analysis during a 16-year follow-up. Int Orthop. 2005;29: 224-8.
14. Campbell P, Mirra J, Amstutz HC. Viability of femoral heads treated with resurfacing arthroplasty. J Arthroplasty. 2000;15:120-2.
15. Heilpern GN, Shah NN, Fordyce MJ. Birmingham hip resurfacing arthroplasty: a series of 110 consecutive hips with a minimum five-year clinical and radiological follow-up. J Bone Joint Surg Br. 2008;90:1137-42.
16. Della Valle CJ, Nunley RM, Raterman SJ, Barrack RL. Initial American experience with hip resurfacing following FDA approval. Clin Orthop Relat Res. 2009; 467:72-8. Erratum in: Clin Orthop Relat Res. 2009;467:587.
17. Australian Orthopaedic Association. National Joint Replacement Registry. Annual report 2008. http://www.dmac.adelaide.edu.au/aoanjrr/documents/ aoanjrrreport-2008.pdf.
18. McMinn D, Treacy R, Lin K, Pynsent P. Metal on metal surface replacement of the hip. Experience of the McMinn prosthesis. Clin Orthop Relat Res. 1996;329 Suppl:89-98.
19. Amstutz HC, Le Duff MJ, Campbell PA, Dorey FJ. The effects of technique changes on aseptic loosening of the femoral component in hip resurfacing. Results of 600 Conserve Plus with a 3 to 9 year follow-up. J Arthroplasty. 2007;22:481-9.
20. Amstutz H, Le Duff M. Cementing the metaphyseal stem in metal-on-metal resurfacing: when and why. Clin Orthop Relat Res. 2009;467:79-83.
21. Amstutz HC, Beaulé PE, Dorey FJ, Le Duff MJ, Campbell PA, Gruen TA. Metal-on-metal hybrid surface arthroplasty. Surgical technique. J Bone Joint Surg Am. 2006;88 Suppl 1(Pt 2):234-49.
22. Bitsch RG, Heisel C, Silva M, Schmalzried TP. Femoral cementing technique for hip resurfacing arthroplasty. J Orthop Res. 2007;25:423-31.
23. Scheerlinck T, de Mey J, Deklerck R. In vitro analysis of the cement mantle of femoral hip implants: development and validation of a CT-scan based measurement tool. J Orthop Res. 2005;23:698-704.
24. Beaulé PE, Matar WY, Poitras P, Smit K, May O. Component design and technique affect cement penetration in hip resurfacing. Clin Orthop Relat Res. 2009;467:84-93.
25. Grigoris P, Roberts P, Panousis K, Jin Z. Hip resurfacing arthroplasty: the evolution of contemporary designs. Proc Inst Mech Eng H. 2006;220:95-105.
26. Gill HS, Campbell PA, Murray DW, De Smet KA. Reduction of the potential for thermal damage during hip resurfacing. J Bone Joint Surg Br. 2007;89: 16-20.
27. American Association of Physicists in Medicine. AAPM Report 39: Specification and acceptance testing of computed tomography scanners. 1993. http:// www.aapm.org/pubs/reports/rpt-39.pdf. Accessed 2009 Sep 29.
28. Scheerlinck T, Vandenbussche P, Noble PC. Quantification of stem-cement interfacial gaps: in vitro CT analysis of Charnley-Kerboul and Lubinus SPII femoral hip implants. J Bone Joint Surg Br. 2008;90:107-13.
29. Beckmann J, Goldapp C, Ringleff K, Schaumburger J, Grifka J, Perlick L. Cementing technique in femoral resurfacing. Arch Orthop Trauma Surg. 2009;129: 1317-25.
30. Bitsch RG, Loidolt T, Heisel C, Schmalzried TP. Cementing techniques for hip resurfacing arthroplasty: development of a laboratory model. J Bone Joint Surg Am. 2008;90 Suppl 3:102-10.
31. Hsieh PH, Tai CL, Liaw JW, Chang YH. Thermal damage potential during hip resurfacing in osteonecrosis of the femoral head: an experimental study. J Orthop Res. 2008;26:1206-9.
32. Little JP, Gray HA, Murray DW, Beard DJ, Gill HS. Thermal effects of cement mantle thickness for hip resurfacing. J Arthroplasty. 2008;23:454-8.
33. Beaulé PE, Lu Z, Campbell P. Bone thermal necrosis and cement penetration in femoral head resurfacing. J Bone Joint Surg Br. 2005;90:97.
34. Eriksson AR, Albrektsson T. Temperature threshold levels for heat-induced bone tissue injury: a vital-microscopic study in the rabbit. J Prosthet Dent. 1983;50:101-7.
35. Beaulé PE, Campbell P, Shim P. Femoral head blood flow during hip resurfacing. Clin Orthop Relat Res. 2007;456:148-52. (Pubitemid 46662411)