An efficient constitutive model for room-temperature, low-rate plasticity of annealed Mg AZ31B sheet

International Journal of Plasticity

Volumn 26, Issue 6, 2010, Pages 820-858

  Li, M ^a   Lou, X Y ^b   Kim, J H ^c   Wagoner, R H ^c  

^a Simulia Central Region   (United States)

^b Georgia Institute of Technology   (United States)

^c Ohio State University   (United States)

Author keywords

Constitutive modeling; Magnesium alloy; Slip; Texture; Twinning

Indexed keywords

ANNEALED STATE; BACK STRESS; C-AXIS ORIENTATIONS; COMPLEX LOADING; COMPUTATION TIME; CONSTITUTIVE MODELING; CONSTITUTIVE PARAMETERS; CONTINUUM MODEL; DEFORMATION CHARACTERISTICS; DEFORMATION MODES; DISCRETE PROBABILITY DENSITY FUNCTIONS; DISLOCATION SLIP; FINITE ELEMENT IMPLEMENTATION; HEXAGONAL CLOSE PACKED; IN-PLANE; IN-PLANE COMPRESSION; ISOTROPIC HARDENINGS; MATERIAL MODELS; METALS AND ALLOYS; MULTI-CYCLE; NONLINEAR KINEMATIC HARDENING; ORDER OF MAGNITUDE; ORDERS OF MAGNITUDE; PLANE STRESS; PLASTIC RESPONSE; PLASTIC YIELDING; POLYCRYSTAL MODELS; ROOM TEMPERATURE; SHEET MATERIAL; SLIP; STRAIN PATHS; STRAIN STATE; VISCO-PLASTIC SELF-CONSISTENT; VON MISES; YIELD SURFACE;

ALLOYS; CONTINUUM MECHANICS; DEFORMATION; DISLOCATIONS (CRYSTALS); FINITE ELEMENT METHOD; HARDENING; MAGNESIUM; MAGNESIUM ALLOYS; METALLURGY; PROBABILITY DENSITY FUNCTION; TEXTURES;

TWINNING;

EID: 77950368769     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2009.11.001     Document Type: Article

References (80)

1. Abaqus, 2006. Users Manual for Version 6.5.1. Hibbit, Karlson & Sorensen Inc.
2. Agnew S.R., and Duygulu O. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B. International Journal of Plasticity 21 (2005) 1161-1193
3. Armstrong, P.J., Frederick, C.O., 1966. A mathematical representation of the multiaxial Bauschinger effect. C.E.G.B. Report RD/B/N731, Berkeley Nuclear Laboratories, Berkeley, UK.
4. Avery D.H., Hosford W.F., and Backofen W.A. Plastic anisotropy in magnesium alloy sheets. Transactions of the Metallurgical Society of AIME 233 (1965) 71-78
5. Balakrishnan, V., 1999. Measurement of in-plane Bauschinger effect in metal sheets, M.S. Thesis, The Ohio State University.
6. Ball E.A., and Prangnell P.B. Tensile-compressive yield asymmetries in high strength wrought magnesium alloys. Scripta Metallurgica et Materialia 31 (1994) 111-116
7. Barlat F., Lege D.J., and Brem J.C. A six-component yield function for anisotropic materials. International Journal of Plasticity 7 (1991) 693-712
8. Barnett M.R., Nave M.D., and Bettles C.J. Deformation microstructures and textures of some cold rolled Mg alloys. Materials Science and Engineering 386A (2004) 205-211
9. Barrett C.S., and Haller C.T.J. Twinning in polycrystalline magnesium. Transactions of the American Institute of Mining, Metallurgical and Petroleum Engineers 171 (1947) 246-260
10. Barrett C.S. The Crystallographic Mechanisms of Translation, Twinning and Banding, Cold Working of Metals (1949), American Society for Metals, Cleveland, OH pp. 65-98
11. Belytschko T., Liu W.K., and Moran B. Nonlinear Finite Elements for Continua and Structures (2000), Wiley, Chichester
12. Bilby B.A., and Crocker A.G. The theory of the crystallography of deformation twinning. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences 288 (1965) 240-255
13. Boger R.K., Wagoner R.H., Barlat F., Lee M.G., and Chung K. Continuous, large strain, tension/compression testing of sheet material. International Journal of Plasticity 21 (2005) 2319-2343
14. Brown D.W., Agnew S.R., Bourke M.A.M., Holden T.M., Vogel S.C., and Tome C.N. Internal strain and texture evolution during deformation twinning in magnesium. Materials Science & Engineering, A: Structural Materials: Properties, Microstructure and Processing 399 (2005) 1-12
15. Cahn R.W. Twinned crystals. Advances in Physics 3 (1954) 363-445
16. Cazacu O., and Barlat F. Generalization of Drucker's yield criterion to orthotropy. Mathematics and Mechanics of Solids 6 (2001) 613-630
17. Cazacu O., and Barlat F. A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals. International Journal of Plasticity 20 (2004) 2027-2045
18. Cazacu O., Plunkett B., and Barlat F. Orthotropic yield criterion for hexagonal closed packed metals. International Journal of Plasticity 22 (2006) 1171-1194
19. Chaboche J.L. Time-independent constitutive theories for cyclic plasticity. International Journal of Plasticity 2 (1986) 149-188
20. Chaboche J.L. A review of some plasticity and viscoplasticity constitutive theories. International Journal of Plasticity 24 (2008) 1642-1693
21. Chen, F.-K., Chang, C.-K., 2005. Stamping of thin-walled structural components with magnesium alloy AZ31 sheets. In: Proceedings of the Sixth International Conference on NUMISHEET 2005, Detroit, Michigan, USA, pp. 619-624.
22. Christian J.W., and Mahajan S. Deformation twinning. Progress in Materials Science 39 (1995) 1-157
23. Chun B.K., Jinn J.T., and Lee J.K. Modeling the Bauschinger effect for sheet metals, part I: theory. International Journal of Plasticity 18 (2002) 571-595
24. Cottrell A.H., and Bilby B.A. Mechanism for the growth of deformation twins in crystals. Philosophical Magazine 42 (1951) 573-581
25. Dawson P.R., and Marin E.B. Computational mechanics for metal deformation processes using polycrystalline plasticity. Advances in Applied Mechanics 34 (1995) 77-169
26. Geng L., Shen Y., and Wagoner R.H. Anisotropic hardening equations derived from reverse-bend testing. International Journal of Plasticity 18 (2002) 743-767
27. Geng L.M., and Wagoner R.H. Role of plastic anisotropy and its evolution on springback. International Journal of Mechanical Sciences 44 (2002) 123-148
28. Gharghouri M.A., Weatherly G.C., Embury J.D., and Root J. Study of the mechanical properties of Mg-7.7 at.% Al by in-situ neutron diffraction. Philosophical Magazine A 79 (1999) 1671-1695
29. Gradinger, R., Stolfig, P., 2003. Magnesium wrought alloys for automotive applications. In: TMS Annual Meeting: Magnesium Technology 2003, San Diego, California, USA, pp. 231-236.
30. Groves G.W., and Kelley A. Independent slip systems in crystals. The Philosophical Magazine 8 (1963) 877-887
31. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society of London 193A (1948) 281-297
32. Hill R. The Mathematical Theory of Plasticity (1950), Clarndon Press, Oxford
33. Hosford W.F. Texture strengthening. Metals Engineering Quarterly 6 (1966) 13-19
34. Hosford W.F. A generalized isotropic yield criterion. Journal of Applied Mechanics - Transactions of the ASME 39 (1972) 607-609
35. Hosford W.F. The Mechanics of Crystals and Textured Polycrystals (1993), Oxford University Press, New York
36. Jain, A., Agnew, S.R., 2005. Measuring the temperature dependence of the flow surface of magnesium alloy sheet. In: Magnesium Technology 2005 in TMS 2005, pp. 71-76.
37. Karaman I., Sehitoglu H., Gall K., Chumlyakov Y.I., and Maier H.J. Deformation of single crystal Hadfield steel by twinning and slip. Acta Materialia 48 (2000) 1345-1359
38. Karaman I., Sehitoglu H., Beaudoin A.J., Chumlyakov Y.I., Maier H.J., and Tome C.N. Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip. Acta Materialia 48 (2000) 2031-2047
39. Kelley E.W., and Hosford W.F. The deformation characteristics of textured magnesium. Transactions of the Metallurgical Society of AIME 242 (1968) 654-661
40. Kelley E.W., and Hosford W.F. Plane-strain compression of magnesium and magnesium alloy crystals. Transactions of the Metallurgical Society of AIME 242 (1968) 5-13
41. Koike J., Kobayashi T., Mukai T., Watanabe H., Suzuki M., Maruyama K., and Higashi K. The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys. Acta Materialia 51 (2003) 2055-2065
42. Koike J. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature. Metallurgical and Materials Transactions A 36 (2005) 1689-1696
43. Koike J., and Ohyama R. Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature. Acta Materialia 53 (2005) 1963-1972
44. Lahaie D., Embury J.D., Chadwick M.M., and Gray G.T. A note on the deformation of fine grained magnesium alloys. Scripta Metallurgica et Materialia 27 (1992) 139-142
45. Lebensohn R.A., and Tomé C.N. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development in polycrystals-application to zirconium alloys. Acta Metallurgica et Materialia 41 (1993) 2611-2624
46. Lee, D., Backofen, W.A., 1965. An experimental determination of the yield locus for titanium and titanium alloy sheet, Bureau of Naval Weapons Report.
47. Lee M.-G., Kim D., Kim C., Wenner M.L., Wagoner R.H., and Chung K. Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part II: characterization of material properties. International Journal of Plasticity 21 (2005) 883-914
48. Lee M.G., Wagoner R.H., Lee J.K., Chung K., and Kim H.Y. Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets. International Journal of Plasticity 24 (2008) 545-582
49. Lee M.G., Kim S.J., Wagoner R.H., Chung K., and Kim H.Y. Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets: application to sheet springback. International Journal of Plasticity 25 (2009) 70-104
50. Li, M., 2006. Constitutive modeling of slip, twinning, and untwinning in AZ31B magnesium. Ph.D. Thesis, The Ohio State University.
51. Lopes A.B., Barlat F., Gracio J.J., Ferreira Duarte J.F., and Rauch E.F. Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear. International Journal of Plasticity 19 (2003) 1-22
52. Lou, X.Y., 2005. Hardening Evolution of AZ31B Mg Sheet. M.S. Thesis, The Ohio State University.
53. Lou X.Y., Li M., Boger R.K., and Wagoner R.H. Hardening evolution of AZ31B Mg sheet. International Journal of Plasticity 23 (2007) 44-86
54. Mahajan S., and Williams D.F. Deformation twinning in metals and alloys. International Metallurgical Reviews 18 (1973) 43-61
55. Mayeur J.R., and McDowell D.L. A three-dimensional crystal plasticity model for duplex Ti-6Al-4V. International Journal of Plasticity 23 (2007) 1457-1485
56. Miura S., Yamamoto S., Ohkubo K., and Mohri T. Deformation behavior of Mg alloy single crystals at various temperatures. Materials Science Forum (2000) 183-188
57. Nobre J.P., Noster U., Kornmeier M., Dias A.M., and Scholtes B. Deformation asymmetry of AZ31 wrought magnesium alloy. Key Engineering Materials (2002) 267-270
58. Noster U., and Scholtes B. Bauschinger effect and deformation twinning of magnesium alloy AZ31. Harterei-Technische Mitteilungen 58 (2003) 322-327
59. Ohno N., and Wang J.D. Nonlinear hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior. International Journal of Plasticity 9 (1993) 375-390
60. Ohno N., and Wang J.D. Kinematic hardening rules with critical state of dynamic recovery, part II: application to experiments of ratchetting behavior. International Journal of Plasticity 9 (1993) 391-403
61. Partridge P.G. The crystallography and deformation modes of hexagonal close-packed metals. Metallurgical Reviews 12 (1967) 169-194
62. Peirce D., Asaro R.J., and Needleman A. An analysis of nonuniform and localized deformation in ductile single crystals. Acta Metallurgica 30 (1982) 1087-1119
63. Peirce D., Asaro R.J., and Needleman A. Material rate dependence and localized deformation in crystalline solids. Acta Metallurgica 31 (1983) 1951-1976
64. Plunkett B., Cazacu O., and Barlat F. Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals. International Journal of Plasticity 24 (2008) 847-866
65. Proust G., Tomé C.N., Jain A., and Agnew S.R. Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31. International Journal of Plasticity 25 (2009) 861-880
66. Rauch E.F., and Schmitt J.H. Dislocation substructures in mild steel deformed in simple shear. Materials Science & Engineering, A: Structural Materials: Properties, Microstructure and Processing 113 (1989) 441-448
67. Rauch E.F. Plastic anisotropy of sheet metals by simple shear tests. Materials Science & Engineering, A: Structural Materials: Properties, Microstructure and Processing 241 (1998) 179-183
68. Reed-Hill R.E., and Abbaschian R. Physical Metallurgy Principles (1994), PWS Publishing Company, Boston
69. Schmid E., and Wassermann G. Uber die mecanische Zwillingsbildung von Zinkkristallen. Zeitschrift fur Physik 48 (1928) 370-383
70. Shiekhelsouk M.N., Favier V., Inal K., and Cherkaoui M. Modelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect. International Journal of Plasticity 25 (2009) 105-133
71. Somekawa H., Kohzu M., Tanabe S., and Higashi K. The press formability in magnesium alloy AZ31. Materials Science Forum (2000) 177-182
72. Spitzig W.A., and Richmond O. The effect of pressure on the flow-stress of metals. Acta Metallurgica 32 (1984) 457-463
73. Stoloff N.S., and Gensamer M. Deformation and fracture of polycrystalline cadmium. Transactions of the Metallurgical Society of AIME 227 (1963) 70-80
74. Taylor G.I. Plastic strain in metals. Journal of the Institute of Metals 62 (1938) 307-324
75. Thamburaja, P., Pan, H., Chau, F.S., 2009. The evolution of microstructure during twinning: constitutive equations, finite-element simulations and experimental verification, International Journal of Plasticity. doi:10.1016/j.ijplas.2009.02.004.
76. von Mises R. Mechanik der plastischen formanderung von kristallen. Zeitschrift fur Angewandte Mathematik und Mechanik 8 (1928) 161-185
77. Wheeler, R.G., Ireland, D.R., 1965. Multiaxial plastic flow of zircaloy-2 determined from hardness data. In: Electrochemical Society Symposium on Zirconium Alloys.
78. Yoo M.H. Slip, twinning, and fracture in hexagonal close-packed metals. Metallurgical Transactions 12A (1981) 409-418
79. Yoon J.W., Barlat F., Chung K., Pourboghrat F., and Yang D.Y. Influence of initial back stress on the earing prediction of drawn cups for planar anisotropic aluminum sheets. Journal of Materials Processing Technology (1998) 433-437
80. Zhang M., Zhang J., and McDowell D.L. Microstructure-based crystal plasticity modeling of cyclic deformation of Ti-6Al-4V. International Journal of Plasticity (2007) 1328-1348