The effect of zirconia surface treatment on flexural strength and shear bond strength to a resin cement

Journal of Prosthetic Dentistry

Volumn 103, Issue 4, 2010, Pages 210-220

  Qeblawi, Dana M ^a   Muñoz, Carlos A ^a   Brewer, Jane D ^a   Monaco Jr , Edward A ^b  

^a UNIVERSITY AT BUFFALO   (United States)

^b School of Dental Medicine at SUNY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

MULTILINK ADHESIVE SYSTEM; RESIN CEMENT; SILANE DERIVATIVE; Y TZP CERAMIC; Y-TZP CERAMIC; YTTRIUM; ZIRCONIUM;

ANALYSIS OF VARIANCE; ARTICLE; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; DENTIN; HUMAN; MATERIALS TESTING; PLIABILITY; SHEAR STRENGTH; SURFACE PROPERTY; TOOTH BRUSHING; TOOTH PROSTHESIS;

ACID ETCHING, DENTAL; AIR ABRASION, DENTAL; ANALYSIS OF VARIANCE; DENTAL BONDING; DENTAL POLISHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; DENTIN; HUMANS; MATERIALS TESTING; PLIABILITY; RESIN CEMENTS; SHEAR STRENGTH; SILANES; SURFACE PROPERTIES; YTTRIUM; ZIRCONIUM;

EID: 77950202373     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(10)60033-9     Document Type: Article

References (36)

1. Evans A.G. Perspective on the development of high-toughness ceramics. J Am Ceram Soc 73 (1990) 187-206
2. Aboushelib M.N., de Jager N., Kleverlaan C.J., and Feilzer A.J. Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater 21 (2005) 984-991
3. Raigrodski A.J. Contemporary all-ceramic fixed partial dentures: a review. Dent Clin North Am 48 (2004) 531-544
4. Scherrer S.S., De Rijk W.G., and Belser U.C. Fracture resistance of human enamel and three all-ceramic crown systems on extracted teeth. Int J Prosthodont 9 (1996) 580-585
5. Albert F.E., and El-Mowafy O.M. Marginal adaptation and microleakage of Procera AllCeram crowns with four cements. Int J Prosthodont 17 (2004) 529-535
6. Blatz M.B. Long-term clinical success of all-ceramic posterior restorations. Quintessence Int 3 (2002) 415-426
7. Höland W., Schweiger M., Frank M., and Rheinberger V. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. J Biomed Mater Res 53 (2000) 297-303
8. Wegner S., and Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2 (2000) 139-147
9. Borges G.A., Sophr A.M., de Goes M.F., Sobrinho L.C., and Chan D.C. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent 89 (2003) 479-488
10. Gupta T.K. Strengthening by surface damage in metastable tetragonal zirconia. J Am Ceram Soc 63 (1980) 117
11. Green D.J. A technique for introducing surface compression into zirconia ceramics. J Am Ceram Soc 66 (1983) c178-c179
12. Xu H.H., Jahanmir S., and Ives L.K. Effect of grinding on strength of tetragonal zirconia and zirconia-toughened alumina. Mach Sci Technol 1 (1997) 49-66
13. Kosmac T., Oblak C., Jevnikar P., Funduk N., and Marion L. Strength and reliability of surface treated Y-TZP dental ceramics. J. Biomed Mater Res 53 (2000) 304-313
14. Xible A., Tavarez R., de Araujo C., and Bonachela W. Effect of silica coating and silanization on flexural and composite-resin bond strengths of zirconia posts: an in vitro study. J Prosthet Dent 95 (2006) 224-229
15. Kosmac T., Oblak C., Jevnikar P., Funduk N., and Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 15 (1999) 426-433
16. Kern M., and Thompson V.P. Sandblasting and silica coating of a glass infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent 71 (1994) 453-461
17. Zhang Y., Lawn B.R., Malament K.A., Van Thompson P., and Rekow E.D. Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont 19 (2006) 442-448
18. Zhang Y., Lawn B.R., Rekow E.D., and Thompson V.P. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B Appl Biomater 71 (2004) 381-386
19. Guazzato M., Quach L., Albakry M., and Swain M.V. Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic. J Dent 33 (2005) 9-18
20. Swain M.V., and Hannink R.H. Metastablility of the martensitic transformation in a 12 mol% ceria-zirconia alloy: II, grinding studies. J Am Ceram Soc 72 (1989) 1358-1364
21. Ozcan M., and Vallittu P.K. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 19 (2003) 725-731
22. Kern M., and Wegner S.M. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14 (1998) 64-71
23. Derand T., Molin M., and Kvam K. Bond strength of composite luting cement to zirconia ceramic surfaces. Dent Mater 21 (2005) 1158-1162
24. Kim B.K., Bae H.E., Shim J.S., and Lee K.W. The influence of ceramic surface treatments on the tensile bond strength of composite resin to all-ceramic coping materials. J Prosthet Dent 94 (2005) 357-362
25. Blatz M.B., Chiche G., Holst S., and Sadan A. Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia. Quintessence Int 38 (2007) 745-753
26. Blatz M.B., Sadan A., and Blatz U. The effect of silica coating on the resin bond to the intaglio surface of Procera AllCeram restorations. Quintessence Int 34 (2003) 542-547
27. Blatz M.B., Sadan A., Martin J., and Lang B. In vitro evaluation of shear bond strengths of resin to densly-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 91 (2004) 356-362
28. Aboushelib M.N., Kleverlaan C.J., and Feilzer A.J. Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials. J Prosthet Dent 98 (2007) 379-388
29. ANSI/ADA Specification No. 69. Dental ceramic: 1999 (1999), American Dental Association, Chicago. Available at: http://www.ada.org/prof/resources/standards/products_specifications.asp
30. Dérand P., and Dérand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 13 (2000) 131-135
31. Magne P., and Cascione D. Influence of post-etching cleaning and connecting porcelain on the microtensile bond strength of composite resin to feldspathic porcelain. J Prosthet Dent 96 (2006) 354-361
32. Gale M.S., and Darvell B.W. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 27 (1999) 89-99
33. Harper R.H., Schnell R.J., Swartz M.L., and Phillips R.W. In vivo measurements of thermal diffusion through restorations of various materials. J Prosthet Dent 43 (1980) 180-185
34. Crim G.A., and Garcia-Godoy F. Microle akage: the effect of storage and cycling duration. J Prosthet Dent 57 (1987) 574-576
35. Inoue S., Koshiro K., Yoshida Y., De Munck J., Nagakane K., Suzuki K., et al. Hydrolytic stability of self-etch adhesives bonded to dentin. J Dent Res 84 (2005) 1160-1164
36. International Standards Organization. ISO TR 11405:1994. Dental materials-guidance on testing of adhesion to tooth structure (1994), ISO, Geneva. Available at: http://www.iso.ch/iso/en/prods-services/ISOstore/store.html