Key factors influencing mechanical performance of dual phase steel resistance spot welds

Science and Technology of Welding and Joining

Volumn 15, Issue 2, 2010, Pages 149-155

  Pouranvari, M ^a   Marashi, S P H ^b  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

AHSS; Dual phase steel; Failure mode; Haz softening; Mechanical properties; Resistance spot weld

Indexed keywords

AHSS; BASE METALS; DP-STEEL; DUAL PHASE; DUAL-PHASE STEEL; ENHANCED DUCTILITY; FAILURE LOCATIONS; HAZ SOFTENING; INTERFACIAL FAILURES; KEY FACTORS; MECHANICAL PERFORMANCE; PEAK LOAD; QUASI-STATIC; RESISTANCE SPOT WELD; SPOT WELD; WELD FUSION ZONES;

ABSORPTION; DUCTILITY; DYNAMIC POSITIONING; ENERGY ABSORPTION; FAILURE ANALYSIS; HEAT AFFECTED ZONE; MARTENSITIC STEEL; PERCOLATION (SOLID STATE); RESISTANCE WELDING; SPOT WELDING; TENSILE STRENGTH; WELDING;

MECHANICAL PROPERTIES;

EID: 77950113833     PISSN: 13621718     EISSN: 13621718     Source Type: Journal    
DOI: 10.1179/136217109X12590746472535     Document Type: Article

References (35)

1. S. J. Kim, C. G. Lee, I. Choi and S. Lee: Metall. Mater. Trans. A, 2001, 32A, 505-514.
2. M. D. Tumuluru: Weld. J., 2007, 86, 31-37.
3. M. Pouranvari, A. Abedi, P. Marashi and M. Goodarzi: Sci. Technol. Weld. Join., 2008, 13, 39-43.
4. X. Sun, E. V. Stephens and M. A. Khaleel: Eng. Fail. Anal., 2008, 15, 356-367.
5. M. Pouranvari, H. R. Asgari, S. M. Mosavizadeh, P. H. Marashi and M. Goodarzi: Sci. Technol. Weld. Join., 2007, 12, 217-225.
6. S. Zuniga and S. D. Sheppard: in 'Fatigue and fracture mechanics', Vol.27, ASTM STP 1296, (ed. R. S. Piascik et al.), 469-489; 1997, Philadelphia, USA, ASTM.
7. M. Marya, K. Wang, L. G. Hector and X. Gayden: J. Manuf. Sci. Eng., 2006, 287-298.
8. S. M. Zuniga: 'Predicting overload pull-out failures in resistance spot welded', PhD thesis, Stanford University, Palo Alto, CA, 1994.
9. H. Lee, N. Kim and T. S. Lee: Eng. Fract. Mech., 2005, 72, 1203-1221.
10. Z. Han andJ. E. Indacochea: J. Mater. Eng. Perform., 1993, 2, 437-444.
11. M. Goodarzi, S. P. H. Marashi and M. Pouranvari: J. Mater. Process. Technol., 2009, 209, 4379-4384.
12. M. Marya and X. Q. Gayden: Weld. J., 2005, 84, 172s-182s.
13. M. Marya and X. Q. Gayden: Weld J., 2005, 84, 197s-204s.
14. M. I Khan, M. L. Kuntz, P. Su, A. Gerlich, T. North and Y. Zhou: Sci. Technol. Weld. Join., 2007, 12, 175-182.
15. C. Ma, S. D. Bhole, D. L. Chen, A. Lee, E. Biro and G. Boudreau: Sci. Technol. Weld. Join., 2006, 11, 480-487.
16. C. Ma, D. L. Chen, S. D. Bhole, G. Boudreau, A. Lee and E. Biro: Mater. Sci. Eng. A, 2008, A485, 334-346.
17. E. Pakalnins and T. Morrisette: 'Comparative resistance spot weld characterization of 600 MPa dual-phase steels using DOE analysis', Proc. 11th Int. Conf. on 'Sheet metal welding', Livonia, MI, May 2004, AWS, Paper 1-3.
18. 'Specification for metal-arc welding of carbon and carbon manganese steels', BS5135, British Standard Institute, London, 1974.
19. 'Recommended practices for test methods and evaluation the resistance spot welding behavior of automotive sheet steels', ANSI/ AWS/SAE D89-97, 1997.
20. M. I Khan, M. L Kuntz and Y. Zhou: Sci. Technol. Weld. Join., 2008, 13, 294-304.
21. D. J. Radakovic and M. D. Tumuluru: Weld. J., 2008, 87, 96s- 105s.
22. A. Joaquin, A. N. A. Elliott and C. Jiang: Weld. J., 2007, 86, 24-27.
23. M. Pouranvari, P. Marashi, M. Goodarzi and H. Bahmanpour: 'Metallurgical factors affecting failure mode of resistance spot welds', Proc. Conf. on 'Materials science and technology', Pittsburgh, PA, USA, October 2008, AcerS/AIST/ASM/TMS, 2465-2475.
24. X. Sun, E. V. Stephens, R. W. Davies, M. A. Khaleel and D. J. Spinella: Weld. J., 2004, 83, 188s-195s.
25. M. Xia, E. Biro, Z. Tian and Y. Zhou: ISIJ Int., 2008, 48, 809-814.
26. K. Kunishige, N. Yamauchi, T. Taka and N. Nagao: 'Softening in weld heat affected zone of dual phase steel sheet for automotive wheel rim', SAE paper no. 830632, SAE, Warrendale, PA, USA, 1983.
27. N. Kapustka, C. Conrardy, S. Babu and C. Albright: Weld J., 2008, 87, 135s-148s.
28. M. K. Wibowo and I. M. Richardson: Adv. Mater. Res., 2007, 15- 17, 1020-1025.
29. V. H. Baltazar Hernandez, S. K. Panda, M. L. Kuntz and Y. Zhou: Mater. Lett., Volume 64, 2010, Pages 207-210.
30. P. C. Lin, S. H. Lin and J. Pan: Eng. Fract. Mech., 2006, 73, 2229-2249.
31. F. Nikoosohbat, S H. Kheirandish, M. Goodarzi, M. Pouranvari and S. P. H. Marashi: Mater. Sci. Technol., to be published.
32. X. Sun, E. V. Stephens and M. A. Khaleel: Weld. J., 2007, 86, 18s- 25s.
33. V. H. B. Hernandez, M. L. Kuntz, M. I. Khan and Y. Zhou: Sci. Technol. Weld. Join., 2008, 13, 769-776.
34. J. Heuschkel: Weld. J, 1952, 31, 931s-943s.
35. J. M. Sawhill and J. C. Baker: Weld. J., 1980, 59, 19ss-30s.