Tensile-shear forces and fracture modes in single and multiple weld specimens in dual-phase steels

Journal of Manufacturing Science and Engineering

Volumn 128, Issue 1, 2006, Pages 287-298

  Marya, Manuel ^a   Wang, Kathy ^b   Hector, Louis G ^c   Gayden, Xiaohong ^c  

^a Department of Geology and Geological Engineering   (United States)

^b GM Global Performance Integration   (United States)

^c GENERAL MOTORS CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DATA ACQUISITION; DEFORMATION; FRACTURE; LEAST SQUARES APPROXIMATIONS; SPOT WELDING; WELDING;

DUAL-PHASE (DP) STEELS; MATERIAL FLOW; SHEET THICKNESS;

STEEL;

EID: 33645322941     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2137751     Document Type: Article

References (29)

1. Zhang, S., 1997, "Stress Intensities at Spot Welds," Int. J. Fract., 88, pp. 167-185.
2. Barkey, M. E., and Kang, H., 1999, "Testing of Spot Welded Coupons in Combined Tension and Shear," Exp. Tech., 23, pp. 20-22.
3. Wung, P., 2001, "A Force-Based Failure Criterion for Spot-Weld Design," Exp. Mech., 41, pp. 107-113.
4. Chao, Y. J., 2003. "Ultimate Strength and Failure Mechanism of Resistance Spot Weld Subjected to Tensile, Shear, or Combined Tensile/Shear Loads," ASME J. Eng. Mater. Technol., 125. pp. 125-132.
5. Chao, Y. J., 2003, "Failure Mode of Spot Welds," Sci. Technol. Weld. Joining, 8. pp. 133-137.
6. Lin, S.-H., Pan, J., Wu, S., and Tyan, T., 2003, "Failure of Spot Weld Specimens under Impact Opening and Shear Loading Conditions," Exp. Mech., 44, pp. 147-15.
7. Lin, S. H., Pan, J., Wu, S. R., Tyan, T., and Wung, P., 2001, "Failure Loads of Spot-welds Under Combined Opening and Shear Static Loading Conditions," Int. J. Solids Struct., 39, pp. 19-39.
8. Cavalli, M. N., Thouless, M. D., and Yang, Q. D., 2005, "Cohesive-Zone Modeling of the Deformation and Fracture of Spot-Welded Joints," Fatigue Fract. Eng. Mater. Struct., 28(10), pp. 861-874.
9. Zhou, M., Zhang, H., and Hu, S. J., 2003, "Relationships Between Quality and Attributes of Spot Welds," Weld. J. (Miami, FL, U. S.), 82, pp. 72s-77s.
10. Heuschkel, J., 1952, "The Expression of Spot Weld Properties," Weld. J. (Miami, FL, U. S.). 31. pp. 931s-943s.
11. Sawhill, J. M., and Baker, J. C., 1980. "Spot Weldability of High-Strength Sheet Steels," Weld. J. (Miami, FL, U. S.), 59, No. 1, pp. 19ss-30s.
12. ANSI/AWS/SAE/D8.9-97, Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials, American Welding Society (1997).
13. Marya, M., and Gayden, X., 2005. "Development of Requirements for Resistance Spot Welding of Dual-Phase Steels (DP600) - Part I: The Causes of Interfacial Fractures," Weld J., 84(11), pp. 172s-182s.
14. Marya, M., and Gayden, X., 2005, "Development of Requirements for Resistance Spot Welding of Dual-Phase Steels (DP600) - Part II: Statistical Analyses," Weld J., 84(12), pp. 197s-204s.
15. Combescure, A., Delcroix, F., Caplain, L., Espanol, S., and Eliot, P., 2003, "A Finite Element to Simulate the Failure of Weld Points on Impact," Int. J. Impact Eng., 28, pp. 783-802.
16. Zhou, M., Hu, S. J., and Zhang, H., 1999, "Critical Specimen Sizes for Tensile-Shear Testing of Steel Sheets," Weld. J. (Miami, FL. U. S.). 78, pp. 305s-312s.
17. ULSAB-AVC (UltraLight Steel Autobody - Advanced Vehicle Concepts) Consortium, Technical Transfer Dispatch #6 (Body Structure Materials), American Iron and Steel Institute, Southfield, MI. May 26 (2001).
18. Krauss, G., (1990), Steels - Heat Treatment and Processing Principles, ASM International, Materials Park, OH, pp. 247-279.
19. Ghosh, P. K., Gupta, P. C., Ramavtar, P., and Jha, B. K., 1991, "Weldability of Intercritical Annealed Dual-Phase Steel with the Resistance Spot Welding Process," Weld. J. (Miami, FL, U. S.), 70, pp. 7s-14s.
20. http://www.autosteel.org/articles/2002_avc_ahss_explaination_home.htm.
21. Tong, W., Tao, H., Jiang, X., Zhang, N., Marya, M., Hector, L. G., Jr., and Gayden, X. Q., 2005, "Deformation and Fracture of Miniature Tensile Bars with Resistance-Spot-Weld Microstructures," Metall. Mater. Trans. A, 36, pp. 2651-2669.
22. Barlat, F., Lege, D. J., and Brem, J. C., 1991, "A Six-Component Yield Function for Anisotropic Materials," Int. J. Plast., 7, pp. 693-712.
23. Barlat, F., and Chung, K., 1993, "Anisotropic Potentials for Plastically Deforming Metals," Modell. Simul. Mater. Sci. Eng., 1, pp. 403-416.
24. General Motors Corporation, 1998, GM4488M Automotive Resistance Spot Welds, General Motors, Detroit, MI.
25. Keller, F., and Smith, D. W., 1944, "Correlation of the Strength and Structure of Spot Welds in Aluminum Alloys," Weld. J. (Miami, FL, U. S.). 23, pp. 23s-26s.
26. McMaster, R. C., and Lindrall, F. C., 1946, "The Interpretation of Radiographs of Spot Welds in Alclad 24S-T and 75S-T Aluminum Alloys," Weld. J. (Miami, FL, U. S.), 25, pp. 707s-723s.
27. Devilliers, L., Kaplan, D., and Saint-Martin, P. S., 1986, "Resistance-Spot Weldability of Hot-Rolled High-Yield Strength Steel," Soudage et Techniques Connexes, 40, pp. 387-395.
28. ASM Handbook, Volume 06, Welding Brazing and Soldering 1993 (American Society for Materials, Materials Park, OH.
29. Saito, T., and Ichiyama, Y., 1996, "Weld Defects and Evaluation Quality-Welding Phenomena and Process Control in Flash Welding of Steel Sheets," Welding International, 10, pp. 117-123.