A novel yield function for single crystals based on combined constraints optimization

International Journal of Plasticity

Volumn 26, Issue 5, 2010, Pages 731-746

  Zamiri, Amir R ^a   Pourboghrat, Farhang ^a  

^a Michigan State University   (United States)

Author keywords

Crystal plasticity; Single crystal; Tube hydroforming; Yield function

Indexed keywords

ALUMINUM TUBES; COMBINED CONSTRAINTS; CONSTRAINED OPTIMIZATION PROBLEMS; CRYSTAL PLASTICITY; CRYSTALLOGRAPHIC DIRECTIONS; FINITE ELEMENT CODES; PRINCIPLE OF MAXIMUM DISSIPATION; SINGLE CONSTRAINT; SINGLE CRYSTAL COPPER; SINGLE CRYSTAL PLASTICITY; SLIP SYSTEM; TUBE HYDROFORMING; UNIAXIAL TENSIONS; YIELD FUNCTION;

CONSTRAINED OPTIMIZATION; FINITE ELEMENT METHOD; PLASTIC DEFORMATION; PLASTICITY; POLYCRYSTALLINE MATERIALS; TUBES (COMPONENTS);

SINGLE CRYSTALS;

EID: 77950025786     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2009.10.004     Document Type: Article

References (58)

1. ABAQUS. ABAQUS Manual, Version 6.3 (2002), Hibbit, Karlsson & Sorensen, Inc., Providence, RI
2. Anand L., and Kothari M. A computational procedure for rate independent crystal plasticity. Journal of the Mechanics and Physics of Solids 44 (1996) 525-557
3. Arminjon M. A regular form of the Schmid law. Application to the ambiguity problem. Textures and Microstructures 14-18 (1991) 1121-1128
4. Asaro RJ., and Needleman A. Texture development and strain hardening in rate dependent polycrystals. Acta Metallurgica 33 (1985) 923-953
5. Asaro R., and Rice J. Strain localization in ductile single crystals. Journal of the Mechanics and Physics of Solids 25 (1977) 309-338
6. Bassani J.L., and Wu T.Y. Latent hardening in single crystals II. Analytical characterization and predictions. Proceedings of the Royal Society of London Series A 435 (1991) 21-41
7. Bridier F., McDowell D.L., Villechaise P., and Mendez J. Crystal plasticity modeling of slip activity in Ti-6Al-4V under high cycle fatigue loading. International Journal of Plasticity 25 (2009) 1066-1082
8. Bronkhorst C.A., Kalidindi S.R., and Anand L. Polycrystal plasticity and the evolution of crystallographic texture in face-centered cubic metals. Philosophical Transactions of the Royal Society of London, Series A 341 (1992) 443-477
9. Bunge H.J. Texture Analysis in Materials Science (1998), Butterworths, London
10. Chen W.F. Plasticity in Reinforced Concrete (1984), McGraw-Hill, New York
11. Chang Y.W., and Asaro R.J. An experimental study of shear localization in aluminum-copper single crystals. Acta Metallurgica 29 (1981) 241-257
12. Cuitino A.M., and Ortiz M. Computational modeling of single crystals. Modeling and Simulation in Materials Science and Engineering 1 (1993) 225-263
13. Darrieulat M., and Piot D. A method of generating analytical yield surfaces of crystalline materials. International Journal of Plasticity 12 (1996) 575-610
14. Desai C.S., and Siriwardane H.J. Constitutive Laws for Engineering Materials, with Emphasis on Geologic Materials (1984), Prentice Hall, Englewood cliff, NJ
15. Franz G., Abed-Meraim F., Lorrain J.-P., Zineb T.B., Lemoine X., and Berveiller M. Ellipticity loss analysis for tangent moduli deduced from a large strain elastic-plastic self-consistent model. International Journal of Plasticity 25 2 (2009) 205-238
16. Gambin W. Plasticity of crystals with interacting slip systems. Engineering Transaction 39 3-4 (1991) 303-324
17. Gambin W. Refined analysis of elastic-plastic crystals. International Journal for Solids and Structures 29 (1992) 2013-2021
18. Gambin W., and Barlat F. Modeling of deformation texture development based on rate independent crystal plasticity. International Journal of Plasticity 13 (1997) 75-85
19. Guan Y., Pourboghrat F., and Barlat F. Finite element modeling of tube hydroforming of polycrystalline aluminum alloy extrusions. International Journal of Plasticity 22 (2006) 2366-2393
20. Havner K.S. Finite Plastic Deformation of Crystalline Solids (1992), Cambridge University Press
21. Hill R. Generalized constitutive relations for incremental deformation of metal crystals by multislips. Journal of the Mechanics and Physics of Solids 14 (1966) 95-102
22. Hill R., and Rice J.R. Constitutive analysis of elastic-plastic crystals at arbitrary strain. Journal of the Mechanics and Physics of Solids 20 (1972) 401-413
23. Huang, Y., 1991. A User-Material Subroutine Incorporating Single Crystal Plasticity in the ABAQUS Finite Element Program Mech Report 178. Harvard University.
24. Hutchison J.W. Elastic-plastic behavior of polycrystalline metals and composites. Proceedings of the Royal Society of London Series A 319 (1976) 247-272
25. Kalidindi S.R., Donohue B.R., and Li S. Modeling texture evolution in equal channel angular extrusion using crystal plasticity finite element models. International Journal of Plasticity 25 (2009) 768-779
26. Kalidindi S.R., and Bronkhorst C.A. Crystallographic texture evolution in bulk deformation processing of FCC metals. Journal of Mechanics and Physics of Solids 40 3 (1992) 537-569
27. Kim H.-K., and Oh S.-I. Finite element analysis of grain-by-grain deformation by crystal plasticity with couple stress. International Journal of Plasticity 19 (2003) 1245-1270
28. Knockaert R., Chastel Y., and Massoni E. Rate-independent crystalline and polycrystalline plasticity, application to fcc materials. International Journal of Plasticity 16 (2000) 179-198
29. Koiter WT. General theorems of elasto-plastic solids. In: Sneddon I.N., and Hill R. (Eds). Progress in Solid Mechanics (1960), North-Holland, Amsterdam 165-221
30. Kreisselmeier, G., Steinhauser, R., 1979. Systematic control design by optimizing a vector performance index. In: Proceedings of IFAC Symposium on Computer Aided Design of Control Systems, Zurich, Switzerland, pp. 113-117.
31. Lequeu Ph., Gilormini P., Montheillet F., Bacroix B., and Jonas J.J. Yield surfaces for textured polycrystals - I. Crystallographic approach. Acta Metallurgy 35 5 (1987) 439-451
32. Lequeu Ph., Gilormini P., Montheillet F., Bacroix B., and Jonas J.J. Yield surfaces for textured polycrystals - II. Analytical approach. Acta Metallurgy 35 5 (1987) 1159-1174
33. Li H.W., Yang H., and Sun C.Z. A robust integration algorithm for implementing rate dependent crystal plasticity into explicit finite element method. International Journal of Plasticity 24 2 (2008) 267-288
34. Mahesh S. A hierarchial model for rate-dependent polycrystals. International Journal of Plasticity 25 5 (2009) 752-767
35. Mandel, J., 1964. Contribution théorique à l'étude de l'écrouissage et des lois de l'écoulement plastique. In: Proceedings of the 11th International Congress on Applied Mechanics, pp. 502-509.
36. Mathur K.K., and Dawson P.R. On modeling the development of crystallographic texture in bulk forming processes. International Journal of Plasticity 5 (1989) 67-94
37. McGinty R., and McDowell D. A semi-implicit integration scheme for rate independent finite crystal plasticity. International Journal of Plasticity 22 6 (2006) 996-1025
38. Miehe C., and Schroder J. A comparative study of stress update algorithms for rate-independent and rate-dependent crystal plasticity. International Journal of Numerical Methods in Engineering 50 (2001) 273-298
39. Miehe C., Schroder J., and Schotte J. Computational homogenization analysis in finite plasticity simulation of texture development in polycrystalline materials. Computer Methods in Applied Mechanics and Engineering 171 (1999) 387-418
40. Montheillet F., Gilormini P., and Jonas J.J. Relation between axial stresses and texture development during torsion testing: a simplified theory. Acta Metallurgy 33 4 (1985) 705-718
41. Neil C.J., and Agnew S.R. Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B. International Journal of Plasticity 25 (2009) 379-398
42. Nemat-Nasser S. On finite element plastic flow of crystalline solids and geomaterials. Journal of Applied Mechanics 50 (1983) 1114-1126
43. Nemat-Nasser S., Okinaka T., and Ni L. A physically-based constitutive model for bcc crystals with application to polycrystal tantalum. Journal of the Mechanics and Physics of Solids 46 6 (1998) 1009-1038
44. Peirce D., Asaro R., and Needleman A. An analysis of nonuniform and localized deformation in ductile single crystals. Acta Metallurgica 30 (1982) 1087-1119
45. Peirce D., Asaro R., and Needleman A. Material rate dependence and localized deformation in crystalline solids. Acta Metallurgica 31 (1983) 1951-1983
46. Raphanel J.L., Ravichandran G., and Leroy Y.M. Three-dimensional rate-dependent crystal plasticity based on Runge-Kutta algorithms for update and consistent linearization. International Journal of Solids and Structures 41 (2004) 5995-6021
47. Rice J. Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity. Journal of the Mechanics and Physics of Solids 19 (1971) 433-455
48. Schmid E., and Boas W. Plasticity of Crystals (1935), Chapman and Hall, London
49. Simo J.C., and Hughes T.J.R. Computational Inelasticity. Interdisciplinary Applied Mathematics (1998), Springer-Verlag, Inc., New York
50. Takahashi H., Motohashi H., Tokuda M., and Abe T. Elastic-plastic finite element polycrystal model. International Journal of Plasticity 10 (1994) 63-80
51. Taylor G.I. Plastic strain in metals. Journal of Institutional Metallurgy 62 (1938) 307-324
52. Taylor G., and Elam C. The distortion of an aluminum crystal during a tensile test. Proceedings of the Royal Society of London Series A 102 (1923) 643-667
53. Toth, L.S., Van Houtte, P., Van Bael, A., 1991. Analytical representation of polycrystal yield surfaces. In: Boehler, J.P., Khan, A.S. (Eds.), Anisotropy and Localization of Plastic Deformation (Proceedings of Plasticity'91: Third International Symposium on Plasticity and its Current Applications). Elsevier Applied Science, London, pp. 183-186.
54. Van Houtte P. Calculation of the yield locus of textured polycrystals using the Taylor and the related Taylor theories. Textures and Microstructures 7 1 (1987) 29-72
55. Wu S.C., and Havner K.S. Analytical and numerical investigation of nonuniform straining and subgrain initiation in bicrystals in channel die compression. Philosophical Transactions of the Royal Society of London, Series A 355 (1997) 1905-1943
56. Yu P., and Havner K.S. Numerical studies of nonuniform deformation, stress state evolution, and subgrain formation in bicrystals in (1 1 0) channel die compression. Journal of the Mechanics and Physics of Solids 49 1 (2001) 173-208
57. Zamiri A., Pourboghrat F., and Barlat F. An effective computational algorithm for rate-independent crystal plasticity based on a single crystal yield surface with an application to tube hydroforming. International Journal of Plasticity 23 (2007) 1126-1147
58. Zhang F., Bower A.F., Mishra R.K., and Boyle K.P. Numerical simulations of necking during tensile deformation of aluminum single crystals. International Journal of Plasticity 25 (2009) 49-69