Modeling texture evolution in equal channel angular extrusion using crystal plasticity finite element models

International Journal of Plasticity

Volumn 25, Issue 5, 2009, Pages 768-779

  Kalidindi, Surya R ^a   Donohue, Brendan R ^a   Li, Saiyi ^b  

^a Drexel University   (United States)

^b SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Crystal plasticity; Crystallographic texture; Equal channel angular extrusion; Finite element methods; Route C textures

Indexed keywords

BOUNDARY CONDITIONS; DEFORMATION; EXTRUSION; FILMS; FORECASTING; PLASTICITY; POLYCRYSTALS; SINGLE CRYSTALS; TEXTURES;

CRYSTAL PLASTICITY; CRYSTALLOGRAPHIC TEXTURE; EQUAL CHANNEL ANGULAR EXTRUSION; FINITE ELEMENT METHODS; ROUTE C TEXTURES;

FINITE ELEMENT METHOD;

EID: 61849094734     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.06.008     Document Type: Article

References (39)

1. ABAQUS, 2003. Reference Manuals, Hibbit, Karlsson, and Sorensen, Inc.
2. Arruffat-Massion R., Toth L.S., and Mathieu J.P. Modeling of deformation and texture development of copper in a 120 degrees ECAE die. Scripta Materialia 54 9 (2006) 1667-1672
3. Bachu V., and Kalidindi S.R. On the accuracy of the predictions of texture evolution by the finite element technique for FCC polycrystals. Materials Science and Engineering A 257 1 (1998) 108-117
4. Berveiller M., Naddari A., Fakri N., and Korbel A. The role of shear bands in the evolution of copper texture. International Journal of Plasticity 8 (1992) 857-865
5. Beyerlein I.J., and Tome C.N. Modeling transients in the mechanical response of copper due to strain path changes. International Journal of Plasticity 23 (2007) 640-664
6. Beyerlein I.J., Lebensohn R.A., and Tome C.N. Modeling texture and microstructural evolution in the equal channel angular extrusion process. Materials Science and Engineering A A345 (2003) 17
7. Beyerlein I.J., Li S., Necker C.T., Alexander D.J., and Tome C.N. Non-uniform microstructure and texture evolution during equal channel angular extrusion. Philosophical Magazine 85 13 (2005) 1359-1394
8. Boudeau N., Gelin J.C., and Salhi S. Computational prediction of the localized necking in sheet forming based on microstructural material aspects. Computational Materials Science 11 1 (1998) 45-64
9. Bronkhorst C.A., Kalidindi S.R., and Anand L. Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals. Philosophical Transactions of the Royal Society of London Series A - Mathematical Physical and Engineering Sciences 341 1662 (1992) 443-477
10. Bunge H. Texture Analysis in Materials Science (1982)
11. De Messenmaeker J., Verlinden B., and Van Humbeeck J. Texture of IF steel after equal channel angular pressing (ECAP). Acta Materialia 53 (2005) 4245-4257
12. Duchene L., El Houdaigui F., and Habraken A.M. Length changes and texture prediction during free end torsion test of copper bars with FEM and remeshing techniques. International Journal of Plasticity 23 8 (2007) 1417-1438
13. Ferrasse S., Segal V.M., Kalidindi S.R., and Alford F. Texture evolution during equal channel angular extrusion Part I. Effect of route, number of passes and initial texture. Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing 368 1-2 (2004) 28-40
14. Gambin W., and Barlat F. Modeling of deformation texture development based on rate independent crystal plasticity. International Journal of Plasticity 13 (1997) 75-78
15. Garmestani H., Vaghar M., and Hart E.W. A unifed model for inelastic deformation of polycrystalline materials-application to transient behavior in cyclic loading and relaxation. International Journal of Plasticity 17 10 (2001) 1367-1391
16. Gelin J.C. Modelling of damage in metal forming processes. Journal of Materials Processing Technology (1998) 24-32
17. Kalidindi S.R. Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals. International Journal of Plasticity 17 6 (2001) 837-860
18. Kalidindi S.R., Bronkhorst C.A., and Anand L. Crystallographic texture evolution in bulk deformation processing of Fcc metals. Journal of the Mechanics and Physics of Solids 40 3 (1992) 537-569
19. Knockaert R., Chastel Y., and Massoni E. Experimental and numerical determination of texture evolution during deep drawing tests. Journal of Materials Processing Technology 110 (2001) 300-311
20. Li S., and Beyerlein I.J. Modelling texture evolution in equal channel angular extrusion of bcc materials: effects of processing route and initial texture. Modelling and Simulation in Materials Science and Engineering 13 4 (2005) 509-530
21. Li S., Beyerlein I.J., Alexander D.J., and Vogel S.C. Texture evolution during multi-pass equal channel angular extrusion of copper: neutron diffraction charecterization and polycrystal modeling. Acta Materialia 53 (2005) 2111-2125
22. Li S., Beyerlein I.J., and Bourke M.A.M. Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear. Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing 394 1-2 (2005) 66-77
23. Li S., Beyerlein I.J., and Necker C.T. On the development of microstructure and texture heterogeneity in ECAE via Route C. Acta Materialia 54 (2006) 1397-1408
24. Li S., Kalidindi S.R., and Beyerlein I.J. A crystal plasticity finite element analysis of texture evolution in equal channel angular extrusion. Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing 410 (2005) 207-212
25. Luis-Perez C.J., Luri-Irigoyen R., and Gaston-Ochoa D. Finite element modelling of an Al-Mn alloy by equal channel angular extrusion (ECAE). Journal of Materials Processing Technology (2004) 846-852
26. Mika D.P., and Dawson P.R. Effects of grain interaction on deformation in polycrystals. Materials Science and Engineering A 257 1 (1998) 76
27. Molinari A., Canova G.R., and Ahzi S. Self consistent approach of the large deformation polycrystal viscoplasticity. Acta Metallurgica et Materialia 35 12 (1987) 2983-2994
28. Raabe D., Wang Y., and Roters F. Crystal plasticity simulation study on the influence of texture on earing in steel. Computational Materials Science 34 3 (2005) 234
29. Rosochowski A., and Olejnik L. Numerical and physical modelling of plastic deformation in 2-turn equal channel angular extrusion. Journal of Materials Processing Technology 125 (2002) 309-316
30. Sarma G.B., and Dawson P.R. Texture predictions using a polycrystal plasticity model incorporating neighbor interactions. International Journal of Plasticity 12 8 (1996) 1023-1054
31. Segal V.M. Materials processing by simple shear. Materials Science and Engineering A A197 (1995) 157-164
32. Semiatin S.L., Delo D.P., and Shell E.B. The effect of material properties and tooling design on deformations and fracture during equal channel angular extrusion. Acta Materialia 48 (2000) 1841-1851
33. Taylor G.I. Plastic strain in metals. Journal of the Institute of Metals 62 (1938) 307-324
34. Toth L.S. Texture evolution in severe plastic deformation by equal channel angular extrusion. Advanced Engineering Materials 5 5 (2003) 308-316
35. Toth L.S. Modelling of strain hardening and microstructural evolution in equal channel angular extrusion. Computational Materials Science 32 3-4 (2005) 568-576
36. Toth L.S., Massion R.A., Germain L., Baik S.C., and Suwas S. Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field. Acta Materialia 52 7 (2004) 1885-1898
37. Van Houtte P., Delannay L., and Samajdar I. Quantitative prediction of cold rolling textures in low-carbon steel by means of the LAMEL model. Textures and Microstructures 31 (1999) 109-149
38. Van Houtte P., Kanjarla A.K., Van Bael A., Seefeldt M., and Delannay L. Multiscale modelling of the plastic anisotropy and deformation texture of polycrystalline materials. European Journal of Mechanics A - Solids 25 4 (2006) 634-648
39. Yang Y.-L., and Lee S. Finite element analysis of strain conditions after equal channel angular extrusion. Materials Processing Technology 140 (2003) 583-587