Effect of stem preheating and precooling on residual stress formation at stem/cement interface for cemented hip implants

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 93, Issue 1, 2010, Pages 258-265

  Madrala, A ^a   Nuno N ^a  

^a ÉCOLE DE TECHNOLOGIE SUPÉRIEURE   (Canada)

Author keywords

Bone cement (PMMA); Hip prosthesis; Polymerization; Residual stresses; Setting time; Stem preheating; Temperature

Indexed keywords

BONE; CURING; HIP PROSTHESES; MIXING; POLYMERIC IMPLANTS; POLYMERIZATION; PREHEATING; RESIDUAL STRESSES; SETTING; TEMPERATURE;

BONE CEMENT POLYMERIZATION; BONE THERMAL NECROSIS; CEMENTED HIP IMPLANTS; CEMENTED HIP PROSTHESIS; EXPERIMENTAL MODELING; INTERFACIAL CHARACTERISTICS; SETTING TIME; TRANSIENT TEMPERATURE;

BONE CEMENT;

BONE CEMENT;

ARTICLE; BONE NECROSIS; COMPRESSIVE STRENGTH; CONTROLLED STUDY; COOLING; EXPERIMENTAL MODEL; HEATING; HIP PROSTHESIS; MECHANICAL STRESS; POLYMERIZATION; RISK ASSESSMENT; ROOM TEMPERATURE; STRESS STRAIN RELATIONSHIP; TENSION;

EID: 77949515971     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31583     Document Type: Article

References (35)

1. Lundskog J. Heat and bone tissue. An experimental investigation of the thermal properties of bone and threshold levels for thermal injury. Scand J Plast Reconstr Surg 1972;9:1-80.
2. Eriksson RA, Alberektsson T. Temperature threshold levels for heat-induced bone tissue injury: A vital microscopic study in the rabbit. J Prosthet Dent 1983;50:101-106.
3. Ahmed AM, Burke DL, Miller J, Nair R. Transient and residual stresses and displacements in self-curing bone cement, Part 1: Characterization of relevant volumetric behavior of bone cement. J Biomech Eng 1982;104:21-27.
4. Iesaka K, Jaffe WL, Jones CM, Kummer FJ. The effects of fluid penetration and interfacial porosity on the fixation of cemented femoral components. J Bone Joint Surg Br 2005;87-B:1298-1302.
5. Stanczyk M, van Rietbergen B. Thermal analysis of bone cement polymerisation at the cement-bone interface. J Biomech 2004;37: 1803-1810.
6. Li C, Schmid S, Mason J. Effects of pre-cooling and pre-heating procedures on cement polymerization and thermal osteonecrosis in cemented hip replacements. Med Eng Phys 2003;25:559-564.
7. Nuño N, Madrala A, Plamondon D. Measurement of transient and residual stresses during polymerization of bone cement for cemented hip implants. J Biomech 2008;41:2605-2611.
8. Roques A, Brown M, Taylor A, New A, Baker D. Quantitative measurement of the stresses induced during polymerisation of bone cement. Biomaterials 2004;25:4415-4424.
9. Muller SD, Green SM, McCaskie AW. The dynamic volume changes of polymerising polymethyl methacrylate bone cement. Acta Orthop Scand 2002;73:684-687.
10. Bishop NE, Ferguson S, Tepic S. Porosity reduction in bone cement at the cement-stem interface. J Bone Joint Surg Br 1996; 78B:349-356.
11. Lennon AB, Prendergast PJ. Residual stress due to curing can initiate damage in porous bone cement: Experimental and theoretical evidence. J Biomech 2002;35:311-321.
12. Nuño N, Amabili M. Modelling debonded stem-cement interface for hip implants: Effect of residual stresses. Clin Biomech 2002;17: 41-48.
13. Mann KA, Bartel DL, Wright TM, Ingraffea AR. Mechanical characteristics of the stem-cement interface. J Orthop Res 1991;9: 798-808.
14. Ahmed AM, Pak W, Burke DL, Miller J. Transient and residual stresses and displacements in self-curing bone cement, Part 2: Thermoelastic analysis of the stem fixation system. J Biomech Eng 1982;104:28-37.
15. Orr JF, Dunne NJ, Quinn JC. Shrinkage stresses in bone cement. Biomaterials 2003;24:2933-2940.
16. Li C, Wang Y, Mason J. The effects of curing history on residual stresses in bone cement during hip arthroplasty. J Biomed Mater Res B Appl Biomater 2004;70B:30-36.
17. Pérez MA, Nuño N, Madrala A, García-Aznar JM, DoblaréM. Computational modelling of bone cement polymerization: Temperature and residual stresses. Comput Biol Med 2009;39: 751-759.
18. Vallo CI. Theoretical prediction and experimental determination of the effect of mold characteristics on temperature and monomer conversion fraction profiles during polymerization of a PMMA-based bone cement. J Biomed Mater Res 2002;63:627-642.
19. Nussbaum DA, Gailloud P, Murphy K. The chemistry of acrylic bone cements and implications for clinical use in image-guided therapy. J Vasc Interv Radiol 2004;15:121-126.
20. Dall DM, Miles AW, Juby G. Accelerated polymerization of acrylic bone cement using preheated implants. Clin Orthop Relat Res 1986;211:148-150.
21. Swedish Hip Arthroplasty Register-Annual Report 2007. Department of Orthopaedics, Sahlgrenska University Hospital, Göteborg, Sweden.
22. CIHI. Canadian Joint Replacement Registry Report: Total Hip and Total Knee Replacements in Canada. Toronto, Canada: Canadian Institute for Health Information; 2004.
23. Wang JS, Taylor M, Flivik G, Lidgren L. Factors affecting the static shear strength of the prosthetic stem-bone cement interface. J Mater Sci Mater Med 2003;14:55-61.
24. Damron LA, Kim D-G, Mann KA. Fatigue debonding of the roughened stem-cement interface: Effects of surface roughness and stem heating conditions. J Biomed Mater Res B Appl Biomater 2006;78B:181-188.
25. Iesaka K, Jaffe WL, Kummer FJ. Effects of preheating of hip prostheses on the stem-cement interface. J Bone Joint Surg Am 2003; 85:421-427.
26. Hansen D, Jensen JS. Prechilling and vacuum mixing not suitable for all bone cements. Handling characteristics and exotherms of bone cements. J Arthroplasty 1990;5:287-290.
27. Talbot JC, Shaw DL. Effects of pre-cooling and pre-heating procedures on cement polymerisation and thermal osteonecrosis in cemented hip replacements. Med Eng Phys 2005;27:439.
28. Jiranek W. Thermal manipulation of bone cement. Orthopedics 2005;28:S863-S866.
29. Salvati EA, Wright TM. Commentary & Perspective on "Effects of preheating of hip prostheses on the stem-cement interface" by Kazuho Iesaka, MD, et al. J Bone Joint Surg 2003.
30. Toksvig-Larsen S, Franzen H, Ryd L. Cement interface temperature in hip arthroplasty. Acta Orthop Scand 1991;62:102-105.
31. He SL, Scott C, Higham P. Mixing of acrylic bone cement: Effect of oxygen on setting properties. Biomaterials 2003;24:5045-5048.
32. Mann KA, Damron LA, Miller MA, Race A, Clarke MT, Cleary RJ. Stem-cement porosity may explain early loosening of cemented femoral hip components: Experimental-computational in vitro study. J Orthop Res 2007;25:340-350.
33. Lidgren L, Drar H, Möller J. Strength of polymethylmethacrylate increased by vacuum mixing. Acta Orthop Scand 1984;55:536-541.
34. Wixson R, Lautenschlager E, Novak M. Vacuum mixing of acrylic bone cement. J Arthroplasty 1987;2:141-149.
35. Smeds S, Goertzen D, Ivarsson I. Influence of temperature and vacuum mixing on bone cement properties. Clin Orthop Relat Res 1997:326-334.