Spontaneous molecular orientation of polyimides induced by thermal imidization (6). Mechanism of negative in-plane CTE generation in non-stretched polyimide films

European Polymer Journal

Volumn 46, Issue 4, 2010, Pages 681-693

  Ishii, Junichi ^a   Takata, Aya ^a   Oami, Yoko ^a   Yokota, Rikio ^b   Vladimirov, Leonid ^c   Hasegawa, Masatoshi ^a  

^a TOHO UNIVERSITY   (Japan)

^b JAPAN AEROSPACE EXPLORATION AGENCY   (Japan)

^c SEMENOV INSTITUTE OF CHEMICAL PHYSICS   (Russian Federation)

Author keywords

Imidization induced in plane orientation; Linear coefficient of thermal expansion (CTE); Negative in plane CTE; Polyimides

Indexed keywords

BINARY BLENDS; CHAIN ORIENTATION; CRYSTALLINE MORPHOLOGIES; CRYSTALLINITIES; FILM DENSITY; FTIR SPECTROSCOPY; IMIDIZATION; IMIDIZATION TEMPERATURE; IN-PLANE; IN-PLANE ORIENTATION; LINEAR COEFFICIENT OF THERMAL EXPANSION; NEGATIVE COEFFICIENTS; P-PHENYLENE DIAMINES; PI FILM; PI SYSTEMS; POLY(ESTER-IMIDE); POLYBENZOXAZOLE; POLYIMIDE FILM; PYROMELLITIC DIANHYDRIDE; SEMICRYSTALLINES; THERMAL IMIDIZATION; THICKNESS DIRECTION; TRIFLUOROMETHYL; WIDE-ANGLE X-RAY DIFFRACTION;

CRYSTALLINE MATERIALS; ESTERS; MOLECULAR ORIENTATION; MORPHOLOGY; NEMATIC LIQUID CRYSTALS; POLYIMIDES; POLYMERIC FILMS; THERMAL STRESS; X RAY DIFFRACTION;

THERMAL EXPANSION;

EID: 77949273379     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2010.01.007     Document Type: Article

References (46)

1. In: Mittal K.L. (Ed). Polyimides: synthesis, characterization and application (1984), Plenum, New York
2. In: Bessonov M.I., Koton M.M., Kudryavtsev V.V., and Laius L.A. (Eds). Polyimide: thermally stable polymers (1987), Plenum, New York
3. In: Feger C., Khojasteh M.M., and McGrath J.E. (Eds). Polyimides: materials, chemistry and characterization (1989), Elsevier, Amsterdam
4. In: Feger C., Khojasteh M.M., and Htoo M.S. (Eds). Advances in polyimide science and technology (1993), Technomic, Lancaster
5. In: Bessonov M.I., and Zubkov V.A. (Eds). Polyamic acid and polyimides: synthesis, transformation and structure (1993), CRC Press, Boca Ranton, FL
6. In: Ghosh M.K., and Mittal K.L. (Eds). Polyimides: fundamentals and applications (1996), Marcel Dekker, New York
7. In: Feger C., Khojasteh M.M., and Molis S.E. (Eds). Polyimides: trends in materials and applications (1996), Society of Plastic Engineers, New York
8. In: Sachdev H.S., Khojasteh M.M., and Feger C. (Eds). Advances in polyimides and low dielectric polymers (1999), Society of Plastic Engineers, New York
9. In: Mittal K.L. (Ed). Polyimides and other high temperature polymers: synthesis, characterization and application vol. 1 (2001), VSP, Zeist, The Netherland
10. In: Imai Y., and Yokota R. (Eds). The latest polyimides: fundamentals and applications (2002), NTS, Tokyo [in Japanese]
11. Numata S., Oohara S., Fujisaki K., Imaizumi J., and Kinjyo N. Thermal expansion behavior of various aromatic polyimides. J Appl Polym Sci 31 (1986) 101-110
12. Numata S., Fujisaki K., and Kinjyo N. Reexamination of the relationship between packing coefficient and thermal expansion coefficient for aromatic polyimides. Polymer 28 (1987) 2282-2288
13. Sensui N., Ishii J., Takata A., Oami Y., Hasegawa M., and Yokota R. Ultra-low CTE and improved toughness of PMDA/PDA polyimide-based molecular composites containing asymmetric BPDA-type polyimides. High Perform Polym 21 (2009) 709-728
14. Hasegawa M., Ishii J., and Shindo Y. Polyimide/polyimide blend miscibility probed by perylenetetracarboxydiimide fluorescence. Macromolecules 32 (1999) 6111-6119
15. Hasegawa M., Okuda K., Horimoto M., Shindo Y., Yokota R., and Kochi M. Spontaneous molecular orientation of polyimides induced by thermal imidization (3). Component chain orientation in binary polyimide blends. Macromolecules 30 (1997) 5745-5752
16. Ishii J., Shimizu N., Ishihara N., Ikeda Y., Sensui N., Matano T., and Hasegawa M. Spontaneous molecular orientation of polyimides induced by thermal imidization (4). Casting- and melt-induced in-plane orientation. Eur Polym J 46 (2010) 69-80
17. Ebisawa S., Ishii J., Sato M., Vladimirov L., and Hasegawa M. Spontaneous molecular orientation of polyimides induced by thermal imidization (5). Effect of ordered structure formation in polyimide precursors on CTE. Eur Polym J 46 (2010) 283-297
18. Hasegawa M., Kobayashi J., and Vladimirov L. Solution-processable low-CTE polybenzoxazoles. J Photopolym Sci Technol 17 (2004) 253-258
19. Maruyama Y., Oishi Y., Kakimoto M., and Imai Y. Synthesis and properties of fluorine-containing aromatic polybenzoxazoles from bis(o-aminophenols) and aromatic diacid chlorides by the silylation method. Macromolecules 21 (1988) 2305-2309
20. Hsiao S.H., and Dai L.R. Synthesis and properties of novel aromatic poly(o-hydroxy amide)s and polybenzoxazoles based on the bis(ether benzoyl chloride)s from hydroquinone and its methyl-, tert-butyl, and phenyl-substituted derivatives. J Polym Sci Part A 37 (1999) 2129-2136
21. Hasegawa M., Matano T., Shindo Y., and Sugimura T. Spontaneous molecular orientation of polyimides induced by thermal imidization (2). In-plane orientation. Macromolecules 29 (1996) 7897-7909
22. Hasegawa M., Sensui N., Shindo Y., and Yokota R. Structure and properties of novel asymmetric biphenyl-type polyimides. Homo- and copolymers and blends. Macromolecules 32 (1999) 387-396
23. g and high thermo-oxidative stability as derived from 2,3,3′,4′-biphenyltetracarboxylic dianhydride. High Perform Polym 13 (2001) 355-364
24. Matsuura T., Hasuda Y., Nishi S., and Yamada N. Polyimide derived from 2,2′-bis(trifluoromethyl)-4,4′-diaminobiphenyl. 1. Synthesis and characterization of polyimides prepared with 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride or pyromellitic dianhydride. Macromolecules 24 (1991) 5001-5005
25. Hasegawa M., and Horii S. Low-CTE polyimides derived from 2,3,6,7-naphthalenetetracarboxylic dianhydride. Polym J 39 (2007) 610-621
26. g properties. High Perform Polym 15 (2003) 47-64
27. Coburn J.C., and Pottiger M.T. Thermal curing in polyimide films and coatings. In: Ghosh M.K., and Mittal K.L. (Eds). Polyimides: fundamentals and applications (1996), Marcel Dekker, New York 207-247
28. Hasegawa M., and Koseki K. Poly(ester imide)s possessing low CTE and low water absorption. High Perform Polym 18 (2006) 697-717
29. Hasegawa M., Tsujimura Y., Koseki K., and Miyazaki T. Poly(ester imide)s possessing low CTE and low water absorption (II). Effect of substituents. Polym J 40 (2008) 56-67
30. Hasegawa M., Tsujimura Y., and Saito T. Low-CTE and low-CHE poly(ester imide)s. In: Kakimoto M. (Ed). Proceedings of POLYCONDENSATION 2008 (2009), Tokyo Institute of Technology, Tokyo 13-19
31. Tsujimura Y., Sakamoto Y., and Hasegawa M. Low-CTE and low-water absorption poly(ester imide)s (8). Polym Prepr Jpn 56 (2007) 1562
32. Ando S., Sawada T., and Inoue Y. Rodlike fluorinated polyimide as an in-plane birefringent optical material. In: Ito H., Tagawa S., and Horie K. (Eds). ACS symposium series 579: polymeric materials for microelectronic applications (1994), American Chemical Society, Washington, DC 283-297
33. Kitagawa T., Murase H., and Yabuki K. Morphological study on poly-p-phenylenebenzobisoxazole (PBO) fiber. J Polym Sci Part B 36 (1998) 39-48
34. Yabuki K. PBO fibers and PBI fibers. In: Imai Y., and Yokota R. (Eds). The latest polyimides: fundamentals and applications (2002), NTS, Tokyo 583-593 [in Japanese]
35. Vladimirov L., Hasegawa M., Yokota R., and Kochi M. FTIR studies of molecular ordering in biphenyl-type polyimides. In: Sachdev H.S., Khojasteh M.M., and Feger C. (Eds). Advances in polyimides and low dielectric polymers (1999), Society of Plastics Engineers, New York 185-189
36. Baklagina Y.G., Milevskaya I.S., Efanova N.V., Sidorovich A.V., and Zubkov V.A. Structure of rigid-chain polyimides from pyromellitic dianhydride. Vysokomol Soedin A18 (1976) 1235-1242
37. Obata Y., Okuyama K., Kurihara S., Kitano Y., and Jinda T. X-ray structure analysis of a wholly aromatic polyimide with a rigid-rod chain. Macromolecules 28 (1995) 1547-1551
38. Vladimirov L., Hasegawa M., and Yokota R. FTIR studies of molecular ordering in biphenyl-type polyimide. Network Polymers 19 (1998) 18-33 [in Japanese]
39. Ishii J., Horii S., Sensui N., Hasegawa M., Vladimirov L., Kochi M., et al. Polyimides containing trans-1,4-cyclohexane unit (III). Ordered structure and intermolecular interaction in s-BPDA/CHDA polyimide. High Perform Polym 21 (2009) 282-303
40. Hasegawa M., and Horie K. Photophysics, photochemistry, and optical properties of polyimides. Prog Polym Sci 26 (2001) 259-335
41. Ii T., Tashiro K., Kobayashi M., and Tadokoro H. Thermomechanical and ultrasonic properties of high-modulus aromatic polyamide fibers. Macromolecules 19 (1986) 1809-1814
42. Takeuchi Y., Yamamoto F., and Shuto Y. Intrinsic values of the linear expansion coefficient for nematic poly(ethy1ene terephtha1ate)/p-oxybenzoate copolyester. Macromolecules 19 (1986) 2059-2061
43. Numata S., and Miwa T. Thermal expansion coefficients and moduli of uniaxially stretched polyimide films with rigid and flexible molecular chains. Polymer 30 (1989) 1170-1174
44. Green D.I., Orchard G.A.J., Davies G.R., and Ward I.M. Thermal expansion of oriented liquid crystal copolyesters. J Polym Sci Polym Phys Ed 28 (1990) 2225-2231
45. 4-17. Chem Mater 10 (1998) 2013-2019
46. Pottiger M.T., Coburn J.C., and Edman J.R. The effect of orientation on thermal expansion behavior in polyimide films. J Polym Sci Part B 32 (1994) 825-837