Semiactive Coulomb friction lead-lag dampers

Journal of the American Helicopter Society

Volumn 55, Issue 1, 2010, Pages

  Bauchau, Olivier A ^a   Van Weddingen, Yannick ^a   Agarwal, Sandeep ^a  

^a Georgia Institute of Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADAPTIVE DAMPING; COULOMB FRICTIONS; CRITICAL COMPONENT; ENERGY DISSIPATION CAPACITIES; FLIGHT CONDITIONS; FORWARD FLIGHT; FRICTION DAMPER; FRICTIONAL INTERFACE; GROUND RESONANCE; HYDRAULIC DAMPER; LEAD-LAG; MAINTENANCE COST; NORMAL CONTACT FORCE; ON-DEMAND; PRACTICAL IMPLEMENTATION; ROTOR SYSTEMS; SEMI-ACTIVE; SEMI-ACTIVE DEVICES; SEMIACTIVE FRICTION DAMPER;

DAMPING; ELECTRON ENERGY LOSS SPECTROSCOPY; ENERGY DISSIPATION; ENERGY DISSIPATORS; MAINTENANCE; ROTORS (WINDINGS); TRIBOLOGY;

FRICTION;

EID: 77649212812     PISSN: 00028711     EISSN: None     Source Type: Journal    
DOI: 10.4050/JAHS.55.012005     Document Type: Article

References (45)

1. Gandhi, F., and Weller, W., "Active Aeromechanical Stability Augmentation Using Fuselage State Feedback," American Helicopter Society 42nd Annual Forum Proceedings, Virginia Beach, VA, April 29-May 1, 1997.
2. Gandhi, F., and Hathaway, E., "Optimized Aeroelastic Couplings for Alleviation of Helicopter Ground Resonance," Journal of Aircraft, Vol.35, (4), 1998, pp. 582-590. (Pubitemid 128586077)
3. Gandhi, R., and Malovah, B., "Influence of Balanced Rotor Anisotropy in the Design of Aeromechanically Stable Helicopters," AIAA Journal, Vol, 37, (10), 1999, pp. 1152-1160.
4. Gandhi, F., "Concepts for Damperless Aeromechanically Stable Rotors," Proceedings of the Royal Aeronautical Society Innovation in Rotorcraft Technology Conference, London, UK, June 25-26, 1997, pp. 14.1-14.31.
5. Hathaway, E., and Gandhi, F., "Concurrent Optimization of Aeroelastic Couplings and Rotor Stiffness for the Alleviation of Helicopter Aeromechanical Instability," Journal of Aircraft, Vol.38, (1), 2001, pp. 69-80. (Pubitemid 32253133)
6. Hathaway, E., and Gandhi, F., "Individual Blade Control for Alleviation of Helicopter Ground Resonance," Proceedings of the 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Long Beach, CA, April 20-23, 1998, AIAA 982006, pp. 2507-2517. (Pubitemid 128586077)
7. Marathe, S., Gandhi, F., and Wang, K. W., "Helicopter Blade Response and Aeromechanical Stability with a Magnetorheological Fluid Based Lag Damper," Journal of Intelligent Material Systems and Structures, Vol.9, (4), 1998, pp. 272-282. (Pubitemid 128498895)
8. Gandhi, F., Wang, K.W., and Xia, L., "Magnetorheological Fluid Damper Feedback Linearization Control for Helicopter Rotor Application," Smart Materials and Structures, Vol.10, (1), 2001, pp. 96-103. (Pubitemid 32253493)
9. Zhao, Y., Choi, Y. T., and Wereley, N. M., "Semiactive Damping of Ground Resonance in Helicopters Using Magnetorheological Dampers," Journal of the American Helicopter Society, Vol.49, (3), 2004, pp. 468-482.
10. Hu, W., and Wereley, N. M., "Magnetorheological Fluid and Elastomeric Lag Damper for Helicopter Stability Augmentation," International Journal of Modern Physics B, Vol.19, (7-9), 2005, pp. 14711477. (Pubitemid 40868854)
11. Yang, B. D., and Menq, C. H., "Characterization of Contact Kinematics and Application to the Design of Wedge Dampers in Turbomachinery Blading, Part I: Stick-Slip Contact Kinematics," ASME Journal of Engineering for Gas Turbines and Power, Vol.120, (3), 1999, pp. 410-417.
12. Yang, B. D., and Menq, C. H., "Characterization of Contact Kinematics and Application to the Design of Wedge Dampers in Turbomachinery Blading, Part II: Prediction of Forced Response and Experimental Verification," ASME Journal of Engineering for Gas Turbines and Power, Vol.120, (3), 1999, pp. 418-423.
13. Gaul, L., and Lenz, J, "Active Damping of Space Structures by Contact Pressure Control in Joints," Mechanics of Structures and Machines, Vol.26, (1), 1998, pp. 81-100. (Pubitemid 128610034)
14. Gaul, L., and Nitsche, R., "Friction Control for Vibration Suppression," Mechanical Systems and Signal Processing, Vol.14, (2), 2000, pp. 139-150.
15. GauI, L., and Nitsche, R., "The Role of Friction in Mechanical Joints," Applied Mechanics Reviews, Vol.54, (2), 2001, pp. 93-105.
16. Gaul, L., Albrecht, H., and Wirnitzer, J., "Semiactive Damping of Large Space Truss Structures Using Friction Joints," Proceedings of the SPIE-The International Society for Optical Engineering, Vol.4935, 2002, pp. 232-243.
17. Gaul, L., Albrecht, H., and Wirnitzer, J., "Semiactive Friction Damping of Large Space Truss Structures," Shock and Vibration, Vol.11, (4), 2004, pp. 173-186.
18. Ferri, A. A., and Heck, B. S., "Analytical Investigation of Damping Enhancement Using Active and Passive Structural Joints," Journal of Guidance, Control, and Dynamics, Vol.15, (1), 1992, pp. 1258-1264.
19. Dupont, P., Kasturi, P., and Stokes, A., "Semiactive Control of Friction Dampers," Journal of Sound and Vibration, Vol.202, (2), 1997, pp. 203-218.
20. Coleman, R. P., and Feingold, A. M., "Theory of Self-Excited Mechanical Oscillations of Helicopter Rotors with Hinged Blades," NACA Technical Report 1351, 1956.
21. Bauchau, O. A., and Wang, J. L., "Efficient and Robust Approaches to the Stability Analysis of Large Multibody Systems," Journal of Computational and Nonlinear Dynamics, Vol.3, (1), January 2008, pp.011001 1-12.
22. Bousman, W. G., and Maier, T., "An Investigation of Helicopter Rotor Blade Flap Vibratory Loads," American Helicopter Society 48th Annual Forum Proceedings, Washington, DC, June 3-5, 1992. (Pubitemid 23640198)
23. Bauchau, O. A., Bottasso, C. L., and Nikishkov, Y. G., "Modeling Rotorcraft Dynamics with Finite Element Multibody Procedures," Mathematical and Computer Modeling, Vol.33, (10-11), 2001, pp. 11131137.
24. Welsh, W. A., "Simulation and Correlation of a Helicopter Air-Oil Strut Dynamic Response," American Helicopter Society 43rd Annual Forum Proceedings, St. Louis, MO, May 18-20, 1987.
25. Welsh, W. A., "Dynamic Modeling of a Helicopter Lubrication System," American Helicopter Society 44th Annual Forum Proceedings, Washington, DC, June 16-18, 1988.
26. Oden, J. C., and Martins, J. A. C., "Models and Computational Methods for Dynamic Friction Phenomena," Computer Methods in Applied Mechanics and Engineering, Vol.52, (2), 1985, pp. 527-634.
27. Shigley, J. E., and Mischke, C. R., Mechanical Engineering Design, McGraw-Hill Book Company, New York, 1989, Chapter 6.
28. Cardona, A., and Géradin, M., "Kinematic and Dynamic Analysis of Mechanisms with Cams," Computer Methods in Applied Mechanics and Engineering, Vol.103, (1), 1993, pp. 115-134. (Pubitemid 23643948)
29. Banerjee, A. K., and Kane, T. R., "Modeling and Simulation of Rotor Bearing Friction," Journal of Guidance, Control, and Dynamics, Vol.17, 1994, pp. 1137-1151.
30. Bauchau, O. A., "On the Modeling of Friction and Rolling in Flexible Multi-Body Systems," Multibody System Dynamics, Vol.3, (1), 1999, pp. 209-239. (Pubitemid 129575656)
31. Bauchau, O. A., and Rodriguez, J., "Modeling of Joints with Clearance in Flexible Multibody Systems," International Journal of Solids and Structures, Vol.39, (1) 2002, pp. 41-63. (Pubitemid 34021245)
32. Valanis, K. C., "A Theory of Viscoplasticity without a Yield Surface," Archives of Mechanics, Vol.23, (4), 1971, pp. 171-191.
33. Hsu, T-K., and Peters, D. A., "A Simple Dynamic Model for Simulating Draft-Gear Behavior in Rail-Car Impacts," ASME Journal of Engineering for Industry, Vol.100, (2), November 1978, pp. 492-496.
34. Dahl, P. R., "Solid Friction Damping of Mechanical Vibrations," AIAA Journal, Vol 14, (6), 1976, pp. 1675-1682.
35. Haessig, D. A., and Friedland, B., "On the Modeling and Simulation of Friction," ASME Journal of Dynamic Systems, Measurement and Control, Vol.113, (1), 1991, pp. 354-362.
36. Canudas de Wit, C., Olsson, H., Astrom, K. J., and Lischinsky, P., "A New Model for Control of Systems with Friction," IEEE Transactions on Automatic Control, Vol.40, (2), 1995, pp. 419-425.
37. Swevers, J., Al-Bender, F., Ganesman, C. G., and Prajogo, T., "An Integrated Friction Model Structure with Improved Presliding Behavior for Accurate Friction Compensation," IEEE Transactions on Automatic Control, Vol.45, (4), 2000, pp. 675-686. (Pubitemid 30904182)
38. Lampaert, V., Swevers, J., and Al-Bender, F., "Modification of the Luuven Integrated Priction Model Structure," IEEE Transactions on Automatic Control, Vol.47, (4), 2002, pp. 683-687. (Pubitemid 34554841)
39. Bauchau, O. A., Rodriguez, J., and Bottasso, C. L., "Modeling of Unilateral Contact Conditions with Application to Aerospace Systems Involving Backlash, Freeplay and Friction," Mechanics Research Communications, Vol.28, (5), 2001, pp. 571-599. (Pubitemid 33061283)
40. Bauchau, O. A., and Ju, C. K., "Modeling Friction Phenomena in Flexible Multibody Dynamics," Computer Methods in Applied Mechanics and Engineering, Vol.195, (50-51), October 2006, pp. 6909-6924.
41. Bauchau, O. A., and Wang, J. L., "Stability Analysis of Complex Multibody Systems," Journal of Computational and Nonlinear Dynamics, Vol.1, (1), January 2006, pp. 71-80. (Pubitemid 44445058)
42. Bauchau, O. A., and Wang, J. L., "Stability Evaluation and System Identification of Flexible Multibody Systems," Multibody System Dynamics, Vol.18, (1), October 2007, pp. 95-106.
43. Bauchau, O. A., and Liu, H., "On the Modeling of Hydraulic Components in Rotorcraft Systems," Journal of the American Helicopter Society, Vol.51, (2), April 2006, pp. 175-184. (Pubitemid 43810418)
44. Peters, D. A., Karunamoorthy, S., and Cao, W. M., "Finite State Induced Flow Models, Part I: Two-Dimensional Thin Airfoil," Journal of Aircraft, Vol.32, (2), 1995, pp. 313-322.
45. Peters, D. A., and He, C. J., "Finite State Induced Flow Models, Part II: Three-Dimensional Rotor Disk," Journal of Aircraft, Vol.32, (2), 1995, pp. 323-333.