Selection of optimum cutting condition of cobalt-based superalloy with GONNS

International Journal of Advanced Manufacturing Technology

Volumn 46, Issue 9-12, 2010, Pages 957-967

  Aykut, Şeref ^a   Demetgul, Mustafa ^b   Tansel, Ibrahim N ^c  

^a BITLIS EREN UNIVERSITY   (Turkey)

^b MARMARA UNIVERSITY   (Turkey)

^c Florida International University   (United States)

Author keywords

Artificial neural networks; CNC milling; Cutting forces; Genetic algorithm; GONN; Stellite 6; Surface milling; Surface roughness

Indexed keywords

ARTIFICIAL NEURAL NETWORK; CNC MILLING; CUTTING FORCES; STELLITE 6; SURFACE MILLING;

COBALT; CUTTING TOOLS; GENETIC ALGORITHMS; MACHINERY; MATHEMATICAL OPERATORS; METAL ANALYSIS; MILLING (MACHINING); OPTIMIZATION; STELLITE; SURFACE PROPERTIES; SURFACE ROUGHNESS; SURFACE TESTING;

NEURAL NETWORKS;

EID: 77349091539     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-009-2165-x     Document Type: Article

References (39)

1. SC Agarwal H Ocken 1990 The microstructure and galling wear of a laser-melted cobalt-base hardfacing alloy Wear 140 223 233 10.1016/0043-1648(90) 90085-O
2. Crook P (1993) Properties and selection: non-ferrous alloys and special-purpose materials 2 (10). Metals handbook, ASM Int., USA, 446
3. Murray JD, McAlister AJ (1984) Bulletin in alloy phase diagrams, 5:90
4. Aykut Ş (2005) The investigation of effects of machinability on chip removal parameters for face milling of cobalt-based superalloy steels. Marmara University Institute of Science & Technology, Ph.D. thesis
5. V Kuzucu M Ceylan H Celik İ Aksoy 1997 Microstructure and phase analyses of Stellite plus 6 wt.% Mo alloy J Mater Process Technol 69 257 263 10.1016/S0924-0136(97)00027-7
6. KE Mohamed MMA Gad AE Nassef AW El-Sayed 1999 Localized behavior of powder metallurgy processed cobalt-based alloy Stellite 6 in chloride environments Z Met kd 90 195 201
7. B Ozcelik M Bayramoglu 2006 The statistical modeling of surface roughness in high-speed flat end milling Int J Mach Tools Manuf 46 1395 1402 10.1016/j.ijmachtools.2005.10.005 (Pubitemid 44119146)
8. AE Diniz JC Filho 1999 Influence of the relative positions of tool and workpiece on tool life, tool wear and surface in the face milling process Wear 232 67 75 10.1016/S0043-1648(99)00159-3 (Pubitemid 30144482)
9. AltIntaş Y (2000) Manufacturing automation. Cambridge University Press, New York, pp 5-6
10. CE Bezce MA Elbestawi 2002 A chip formation based analytic force model for oblique cutting Int J Mach Tools Manuf 42 529 538 10.1016/S0890-6955(01) 00129-8 (Pubitemid 34040574)
11. G Peigne H Paris D Brissaud A Gouskov 2004 Impact of the cutting dynamics of small radial immersion milling operations on machined surface roughness Int J Mach Tools Manuf 44 1133 1142 10.1016/j.ijmachtools.2004.04.012
12. P Franco M Estrems F Fuara 2004 Influence of radial and axial run outs on surface roughness in face milling with round insert cutting tools Int J Mach Tools Manuf 44 1555 1565 10.1016/j.ijmachtools.2004.06.007
13. HA Kishawy M Dumitrescu EG Ng MA Elbestawi 2005 Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy Int J Mach Tools Manuf 45 219 227 10.1016/j.ijmachtools.2004.07.003
14. M de Souza SWF Jr SC Santosc AR Machadod 2005 Performance of single Si3N4 and mixed Si3N4CPCBN wiper cutting tools applied to high speed face milling of cast iron Int J Mach Tools Manuf 45 335 344 10.1016/j.ijmachtools.2004.08.006
15. YM Ertakin Y Kwon TL Tseng 2003 Identification of common sensory features for the control of CNC milling operations under varying cutting conditions Int J Mach Tools Manuf 43 897 904 10.1016/S0890-6955(03)00087-7
16. KH Fuht CF Wu 1995 A proposed statistical model for surface quality prediction in end-milling of Al alloy Int J Mach Tools Manuf 35 1187 1200 10.1016/0890-6955(95)90408-E
17. UA Dabade SS Joshi N Ramakrishnan 2003 Analysis of surface roughness and cross-sectional area while machining with self propelled round inserts milling cutter J Mater Process Technol 132 305 312 10.1016/S0924-0136(02)00949-4 (Pubitemid 35433596)
18. H Saglam A Unuvar 2003 Tool condition monitoring in milling based on cutting forces by a neural network Int J Prod Res 41 1519 1532 10.1080/0020754031000073017
19. PG Benardos GC Vosniakos 2003 Predicting surface roughness in machining: a review Int J Mach Tools Manuf 43 833 844 10.1016/S0890-6955(03)00059-2
20. J Balic M Korosec 2002 Intelligent tool path generation for milling of free surfaces using neural networks Int J Mach Tools Manuf 42 1171 1179 10.1016/S0890-6955(02)00045-7 (Pubitemid 34965395)
21. B Ozcelik H Oktem H Kurtaran 2005 Optimum surface roughness in end milling Inconel 718 by coupling neural network model and genetic algorithm Int J Adv Manuf Technol 27 234 241 10.1007/s00170-004-2175-7
22. AI El-Wahab HA Kishawy 2000 A new method to improve the surface quality during CNC machining Int J Prod Res 38 3711 3723 1094.90521 10.1080/ 00207540050175969 (Pubitemid 35401927)
23. DK Baek TJ Ko HS Kim 1997 A dynamic surface roughness model for face milling Precis Eng 20 171 178 10.1016/S0141-6359(97)00043-3
24. PE Amiolemhen AOA Ibhadode 2004 Application of genetic algorithms-determination of the optimal machining parameters in the conversion of a cylindrical bar stock into a continuous finished profile Int J Mach Tools Manuf 44 12/13 1403 1412 10.1016/j.ijmachtools.2004.02.001
25. IN Tansel WY Bao TT Arkan CV Kropas-Hughes 2002 Genetic algorithm versus neural network in health monitoring applications Intelligent Engineering Systems Through Artificial Neural Networks 12 255 260
26. IN Tansel WY Bao NS Reen CV Kropas-Hughes 2005 Genetic tool monitor (GTM) for micro-end-milling operations Int J Mach Tools Manuf 45 293 299 10.1016/j.ijmachtools.2004.08.013
27. F Cus J Balic 2003 Optimization of cutting process by GA approach Robot Comput-Integr Manuf 19 1-2 113 121 10.1016/S0736-5845(02)00068-6
28. JP Davim CAC António 2001 Optimisation of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model J Mater Process Technol 112 1 78 82 10.1016/S0924-0136(01)00551-9 (Pubitemid 32377154)
29. Z Khan B Prasad T Singh 1997 Machining condition optimization by genetic algorithms and simulated annealing Comput Oper Res 24 7 647 657 0882.90061 10.1016/S0305-0548(96)00077-9
30. M Brezocnik M Kovacic 2003 Integrated genetic programming and genetic algorithm approach to predict surface roughness Mater Manuf Process 18 3 475 491 10.1081/AMP-120022023
31. WT Chien CS Tsai 2003 The investigation on the prediction of tool wear and the determination of optimum cutting conditions in machining 17-4PH stainless steel J Mater Process Technol 140 1/3 340 345 10.1016/S0924-0136(03) 00753-2
32. IN Tansel B Ozcelik WY Baoa P Chena D Rincona SY Yanga A Yenilmez 2006 Selection of optimal cutting conditions by using GONNS Int J Mach Tools Manuf 46 26 35 10.1016/j.ijmachtools.2005.04.012 (Pubitemid 41497897)
33. SY Yang IN Tansel CV Kropas-Hughes 2003 Selection of optimal material and operating conditions in composite manufacturing. Part I: computational tool Int J Mach Tools Manuf 43 169 173 10.1016/S0890-6955(02)00132-3 (Pubitemid 35385297)
34. SY Yang V Girivasan NR Singh IN Tansel CV Kropas-Hughes 2003 Selection of optimal material and operating conditions in composite manufacturing. Part II: complexity, representation of characteristics and decision making Int J Mach Tools Manuf 43 175 184 10.1016/S0890-6955(02)00133-5 (Pubitemid 35385298)
35. Tansel I N, Yang S Y, Shu C, Bao W Y, Mahendrakar N, Dagli C H, Akay M, Buczak A L, Ersoy O, Fernandez (Eds.) B 1999 Introduction to genetically optimized neural network systems (GONNS). Smart engineering systems: neural networks, fuzzy logic, evolutionary programming, data mining, and rough sets, ASME, New York, 331-336
36. ISO 8688-1 (1989) Tool life testing in milling, part I, face milling, 1st edition
37. MS Lou JC Chen CM Li 1999 Surface roughness prediction technique for CNC end milling J Ind Technol 15 1 1 6
38. JL Yang JC Chen 2001 A systematic approach for identifying optimum surface roughness performance in end-milling operations J Ind Technol 17 2 1 8
39. E BaǧcI Ş Aykut 2006 A study of Taguchi optimization method for identifying optimum surface roughness in CNC face milling of cobalt-based alloy (stellite 6) Int J Adv Manuf Technol 29 940 947 10.1007/s00170-005-2616-y (Pubitemid 44195220)