Building quality into a coating process

Pharmaceutical Development and Technology

Volumn 15, Issue 1, 2010, Pages 35-45

  Naelapää, Kaisa ^a,b   Veski, Peep ^b   Kristensen, Henning Gjelstrup ^a   Rantanen, Jukka ^a   Bertelsen, Poul ^c  

^a UNIVERSITY OF COPENHAGEN   (Denmark)

^b UNIVERSITY OF TARTU   (Estonia)

^c Nycomed Denmark   (Denmark)

Author keywords

Coat integrity; Coating; Critical process variables; Critical quality attributes; Design of experiments; Quality by design; Risk analysis

Indexed keywords

CHLORPHENIRAMINE MALEATE; CILAZAPRIL; DICLOFENAC; DIPHENHYDRAMINE; DIPYRIDAMOLE; ETHYL CELLULOSE; IBUPROFEN; METOCLOPRAMIDE; OLEIC ACID; POTASSIUM CHLORIDE; PSEUDOEPHEDRINE; THEOPHYLLINE; CELLULOSE; DELAYED RELEASE FORMULATION;

ARTICLE; DRUG COATING; DRUG RELEASE; POROSITY; PRIORITY JOURNAL; QUALITY CONTROL; RISK ASSESSMENT; RISK MANAGEMENT; STATISTICAL ANALYSIS; ANALOGS AND DERIVATIVES; CHEMISTRY; DELAYED RELEASE FORMULATION; DRUG FORMULATION; PHARMACEUTICS; PROCEDURES; SOLUBILITY; STANDARDS;

CELLULOSE; DELAYED-ACTION PREPARATIONS; DRUG COMPOUNDING; RISK ASSESSMENT; RISK MANAGEMENT; SOLUBILITY; TECHNOLOGY, PHARMACEUTICAL;

EID: 76749142425     PISSN: 10837450     EISSN: 10979867     Source Type: Journal    
DOI: 10.3109/10837450902882377     Document Type: Article

References (37)

1. International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use (October 2008). Quality Risk Management Q9. (http://www. ich.org/LOB/media/MEDIA1957.pdf ).
2. Montgomery DC. Design and analysis of experiments. 5th ed. New York: John Wiley & Sons, Inc.; 2001.
3. Cheng XX, Turton R. The prediction of variability occurring in fluidized bed coating equipment. I. The measurement of particle circulation rates in a bottom-spray fluidized bed coater. Pharm Dev Technol 2000;5(3):311-322. (Pubitemid 30602838)
4. Turton R. Challenges in the modeling and prediction of coating of pharmaceutical dosage forms. Powder Technol 2008;181(2):186-194.
5. Hossain M, Ayers JW. Variables that influence coat integrity in a laboratory spray coater. Pharm Technol 1990;14(10):72-82.
6. Iyer U, Hong WH, Das N, Ghebre-Sellassie I. Comparative evaluation of three organic solvent and dispersion-based ethylcellulose coating formulations. Pharm Technol 1990;14(9):68-86.
7. Shah NH, Zhang L, Railkar A, Trivedi I, Patel CI, Infeld MH, Malick AW, Wong LK. Factors affecting the kinetics and mechanism of release of cilazapril from beadlets coated with aqueous and nonaqueous ethylcellulose-based coatings. Pharm Technol 1994;18(10):140-149.
8. Rohera BD, Parikh NH. Influence of plasticizer type and coat level on Surelease® film properties. Pharm Dev Technol 2002;7(4):407-420.
9. Parikh NH, Porter SC, Rohera BD. Aqueous ethylcellulose dispersion of ethylcellulose. I. Evaluation of coating process variables. Pharm Res 1993;10(4):525-534.
10. Sadeghi F, Ford JL, Rubinstein MH, Rajabi-Siahboomi AR. Comparative study of drug release from pellets coated with HPMC or Surelease?. Drug Dev Ind Pharm 2000;26(6):651-660.
11. Lorck CA, Grunenberg PC, Junger H, Laicher A. Influence of process parameters on sustained-release theophylline pellets coated with aqueous polymer dispersions and organic solvent-based polymer solutions. Eur J Pharm Biopharm 1997;43(2):149-157.
12. Laicher A, Lorck CA, Grunenberg PC, Klemm H, Stanislaus F. Aqueous coating of pellets to sustained-release dosage forms in a fluid-bed coater - influence of product temperature and polymer concentration on in-vitro release. Pharm Ind 1993;55(12):1113-1116.
13. Sadeghi F, Ford JL, Rajabi-Siahboomi AR. The influence of drug type on the release profiles from Surelease®-coated pellets. Int J Pharm 2003;254:123-135.
14. Sadeghi F, Ford JL, Rubinstein MH, Rajabi-Siahboomi AR. Study of drug release from pellets coated with Surelease® containing hydroxypropylmethylcellulose. Drug Dev Ind Pharm 2001;27(5):419-430.
15. Kim MS, Kim JS, Kang SH, Yoo YH, Lee S, Park JS, Wool JS, Hwang SJ. Influence of water soluble additives and HPMCP on drug release from Surelease?-coated pellets containing tamsulosin hydrochloride. Arch Pharm Res 2007;30(8):1008-1013.
16. Rohera BD, Parikh NH. Influence of type and level of water-soluble additives on drug release and surface and mechanical properties of Surelease® films. Pharm Dev Technol 2002;7(4):421-432.
17. Palmer D, Vuong H, Levina M, Rajabi-Siahboomi AR. The influence of hydrophilic pore formers on dipyridamole release from aqueous ethylcellulose film-coated pellets. AAPS Annual Meeting 2007.
18. Levina M, Vuong H, Rajabi-Siahboomi AR. The effect of hypromellose as a pore-former on drug release from aqueous ethylcellulose film-coated dipyridamole-loaded non-pareil beads. Controlled Release Society 2007.
19. Vesey CF, Rizzo M, Rajabi-Siahboomi AR. Identification and influence of critical coating process parameters on drug release from a fully formulated aqueous ethylcellulose dispersion. AAPS Annual Meeting 2007.
20. Ghebre-Sellassie I, Iyer U, Kubert D, Fawzi MB. Characterization of a new water-based coating for modified-release preparations. Pharm Technol 1988;12(9):96-106.
21. Sousa JJ, Sousa A, Moura MJ, Podczeck F, Newton JM. The influence of core materials and film coating on the drug release from coated pellets. Int J Pharm 2002;233(1-2):111-122. (Pubitemid 34230423)
22. Kim MS, Jun SW, Lee S, Lee TW, Park JS, Hwang SJ. The influence of Surelease® and sodium alginate on the in-vitro release of tamsulosin hydrochloride in pellet dosage form. J Pharm Pharmacol 2005;57(6):735-742.
23. McConnell EL, Tutas J, Mohamed MAM, Banning D, Basit AW. Colonic drug delivery using amylose films: The role of aqueous ethylcellulose dispersions in controlling drug release. Cellulose 2007;14(1):25-34.
24. Vanderhoff JW, Bradford EB, Carrington WK. The transport of water through latex films. J Polymer Sci 1973;41:155-174.
25. Arwidsson H, Hjelstuen O, Ingason D, Graffner C. Properties of ethylcellulose films for extended release. III. Influence of process factors when using aqueous dispersions. Acta Pharm Nord 1991;3(4):223-228.
26. Ebey GC. A thermodynamic model for aqueous film-coating. Pharm Technol 1987;11(4):40-50.
27. Yang ST, Ghebre-Sellassie I. The effect of product bed temperature on the microstructure of Aquacoat-based controlled-release coatings. Int J Pharm 1990;60(2):109-124.
28. Dyer AM, Khan KA, Aulton ME. Effect of polymer loading on drug-release from film-coated ibuprofen pellets prepared by extrusion-spheronization. Drug Dev Ind Pharm 1995;21(16):1841-1858.
29. Zhang G, Schwatz JB, Schnaare RL. Beads coated with Surelease?: Effects of substrate characteristics on critical coating level. Proc Int Symp Control Rel Bioact Mater 1989;16:150-151.
30. Vesey CF, Farell T, Rajabi-Siahboomi AR. Evaluation of alternative plasticizer for Surelease®, an aqueous ethylcellulose dispersion for modified release film-coating. Controlled Release Society Annual Meeting 2005.
31. Sakellariou P, Rowe RC, White EFT. The thermomechanical properties and glass-transition temperatures of some cellulose derivatives used in film coating. Int J Pharm 1985;27(2-3):267-277.
32. Paulsson M, Singh SK. Colloidal and thermal characteristics of concentrated dispersions of polymethacrylate-based latices for aqueous enteric coating. J Pharm Sci 1999;88(4):406-411.
33. Narisawa S, Yoshino H, Hirakawa Y, Noda K. Porosity-controlled ethylcellulose film coating. II. Spontaneous porous film formation in the spraying process and its solute permeability. Int J Pharm 1994;104(2):95-106.
34. Wu CB, McGinity JW. Influence of relative humidity on the mechanical and drug release properties of theophylline pellets coated with an acrylic polymer containing methylparaben as a non-traditional plasticizer. Eur J Pharm Biopharm 2000;50(2):277-284.
35. Bodmeier R, Paeratakul O. Mechanical-properties of dry and wet cellulosic and acrylic films prepared from aqueous colloidal polymer dispersions used in the coating of solid dosage forms. Pharm Res 1994;11(6):882-888.
36. Heng PWS, Chan LW, Ong KT. Influence of storage conditions and type of plasticizers on ethylcellulose and acrylate films formed from aqueous dispersions. J Pharm Pharmaceut Sci 2003;6(3):334-344.
37. Naelapää K, Allesø M, Kristensen HG, Bro R, Rantanen J, Bertelsen P. Increasing process understanding by analyzing complex interactions in experimental data. J Pharm Sci 2009; 98(5): 1852-1861.