Strontium-based Glass Polyalkenoate Cements for luting Applications in the Skeleton

Journal of Biomaterials Applications

Volumn 24, Issue 6, 2010, Pages 483-502

  Clarkin, O ^a   Boyd, D ^b   Towler, M R ^a,c  

^a UNIVERSITY OF LIMERICK   (Ireland)

^b Department of Chemistry   (Ireland)

^c NAGOYA UNIVERSITY   (Japan)

Author keywords

Bioactivity; Glass polyalkenoate cements; Mechanical properties.; SBF (simulated body fluids)

Indexed keywords

ARTHROPLASTIES; CALCIUM-ZINC; GLASS POLYALKENOATE CEMENT; GLASS POLYALKENOATE CEMENTS; HANDLING PROPERTIES; HIGH MOLECULAR WEIGHT; LOW MOLECULAR WEIGHT; MECHANICAL STRENGTH; POLYACRYLIC ACIDS; SBF (SIMULATED BODY FLUIDS); SETTING TIME; SIMULATED BODY FLUIDS; TRABECULAR BONES; VERTEBROPLASTY; ZNO;

BIOCERAMICS; BODY FLUIDS; CALCIUM; CALCIUM ALLOYS; CALCIUM PHOSPHATE; CALCIUM SILICATE; CARBOXYLIC ACIDS; CEMENTS; GLASS; MECHANICAL PROPERTIES; MOLECULAR WEIGHT; ORGANIC ACIDS; PROSTHETICS; SILICATES; STRONTIUM; ZINC; ZINC OXIDE;

BONE CEMENT;

ALKENE; GLASS; POLYMER; STRONTIUM;

ARTICLE; BODY FLUID; CHEMISTRY; SCANNING ELECTRON MICROSCOPY;

ALKENES; BODY FLUIDS; GLASS; MICROSCOPY, ELECTRON, SCANNING; POLYMERS; STRONTIUM;

EID: 76649125856     PISSN: 08853282     EISSN: 15308022     Source Type: Journal    
DOI: 10.1177/0885328208099085     Document Type: Article

References (62)

1. Giannoudis, P.V. and Schneider, E. (2006). Principles of Fixation of Osteoporotic Fractures, Journal of Bone and Joint Surgery-British Volume, 88-B (10). 1272-1278.
2. Truumees, E., Hilibrand, A. and Vaccaro, A.R. (2004). Percutaneous Vertebral Augmentation, The Spine Journal, 4 (2). 218-229.
3. Lewis, G. (2006). Injectable Bone Cements for Use in Vertebroplasty and Kyphoplasty: State-of-the-Art Review, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 76B (2). 456-468.
4. Deramond, H., Wright, N.T. and Belkoff, S.M. (1999). Temperature Elevation Caused by Bone Cement Polymerization during Vertebroplasty, Bone 25 (2, Supplement 1). 17S - 21S.
5. Lieberman, I.H., Togawa, D. and Kayanja, M.M. (2005). Vertebroplasty and Kyphoplasty: Filler Materials, The Spine Journal, 5 (6, Supplement 1). S305 - S316.
6. Kim, C.W., Minocha, J., Wahl, C.E. and Garfin, S.R. (2004). Response of Fractured Osteoporotic Bone to Polymethylmethacrylate after Vertebroplasty: Case Report, The Spine Journal, 4 (6). 709-712.
7. Baroud, G., Falk, R., Crookshank, M., Sponagel, S. and Steffen, T. (2004). Experimental and Theoretical Investigation of Directional Permeability of Human Vertebral Cancellous Bone for Cement Infiltration, Journal of Biomechanics, 37 (2). 189-196.
8. Perey, O. (1974). Resistance and Compression of the Lumbar Vertebrae, Encyclopedia of Medical Radiology, Springer-Verlag, New York.
9. Nachemson, A. (1966). The Load on Lumbar Discs in Different Positions of the Body, Clinical Orthopaedics and Related Research, 45: 107.
10. Bell, G.H., Dunbar, O., Beck, J.S. and Gibt, A. (1966). Variations in Strength of Vertebrae with Age and Their Relation to Osteoporosis, Calcified Tissue International, 1 (1). 75-86.
11. White, A.A. and Panjabi, M.M. (1990). Clinical Biomechanics of the Spine, 2 nd edn, p. 722, J.B. Lippincott Company, Philadelphia.
12. Trout, A.T., Kallmes, D.F. and Kaufmann, T.J. (2006). New Fractures after Vertebroplasty: Adjacent Fractures Occur Significantly Sooner, AJNR American Journal of Neuroradiology, 27 (1). 217-223.
13. Turner, T.M., Urban, R.M., Singh, K., Hall, D.J., Renner, S.M., Lim, T.H., Tomlinson, M.J. and An, H.S. (2007). Vertebroplasty Comparing Injectable Calcium Phosphate Cement Compared with Polymethylmethacrylate in a Unique Canine Vertebral Body Large Defect Model. The Spine Journal, (in press).
14. Luo, J., Skrzypiec, D.M., Pollintine, P., Adams, M.A., Annesley-Williams, D.J. and Dolan, P. (2007). Mechanical Efficacy of Vertebroplasty: Influence of Cement Type, BMD, Fracture Severity, and Disc Degeneration, Bone, 40 (4). 1110-1119.
15. Gladius, L. (2006). Injectable Bone Cements for Use in Vertebroplasty and Kyphoplasty: State-of-the-art Review, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 76B (2). 456-468.
16. Dunne, N.J. and Orr, J.F. (2001). Thermal Characteristics of Curing Acrylic Bone Cement. ITBM-RBM, 22 (2). 88-97.
17. Donkerwolcke, M., Burny, F. and Muster, D. (1998) Tissues and Bone Adhesives-historical Aspects, Biomaterials, 19 (16). 1461-1466.
18. Pomerink, G.J., DiCicco, M.P., Clineff, T.D. and Erbe, E.M. (2003). Evaluation of the Reaction Kinetics of Cortoss, a Thermoset Cortical Bone Void Filler, Biomaterials, 24: 1023-1031.
19. Darmani, H. and Al-Hiyasat, A.S. (2006). The Effects of BIS-GMA and TEG-DMA on Female Mouse Fertility, Dental Materials, 22 (4). 353-358.
20. Soderholm, K.J. and Mariotti, A. (1999). Bis-GMA-based Resins in Dentistry: Are They Safe ? Journal of American Dental Association, 130 (2). 201-209.
21. Schweikl, H., Schmalz, G. and Rackebrandt, K. (1998). The Mutagenic Activity of Unpolymerized Resin Monomers in Salmonella Typhimurium and V79 Cells, Mutation Research/Genetic Toxicology and Environmental Mutagenesis, 415 (1-2). 119-130.
22. Thonemann, B., Schmalz, G., Hiller, K.A. and Schweikl, H. (2002). Responses of L929 Mouse Fibroblasts, Primary and Immortalized Bovine Dental Papilla-derived Cell Lines to Dental Resin Components, Dental Materials, 18 (4). 318-323.
23. Boyd, D., Towler, M., Wren, A. and Clarkin, O. (2008). Comparison of an Experimental Bone Cement with Surgical Simplex« P, Spineplex« and Cortoss«, Journal of Materials Science: Materials in Medicine, 19 (4). 1745-1752.
24. Cattani-Lorente, M.A., Godin, C. and Meyer, J.M. (1993). Early Strength of Glass Ionomer Cements, Dental Materials, 9 (1). 57-62.
25. Tyas, M.J. and Burrow, M.F. (2004). Adhesive Dental Materials: A Review. Australian Dental Journal, 49 (3). 112-121.
26. Hatton, P.V., Hurrell-Gillingham, K. and Brook, I.M. (2006). Biocompatibility of Glass-ionomer Bone Cements, Journal of Dentistry, 34: 598-601.
27. Boyd, D. and Towler, M.R. (2005). The Processing, Mechanical Properties and Bioactivity of Zinc Based Glass Ionomer Cements, Journal of Materials Science: Materials in Medicine, V16 (9). 843-850.
28. Nicholson, J.W. and Wilson, A.D. (1993). Acid-base Cements- Their Biomedical and Industrial Applications, In: West, A.R. (ed.), Chemistry of Solid State Materials, Vol. 3, Cambridge University Press, Cambridge.
29. Griffin, S.G. and Hill, R.G. (1999). Influence of Glass Composition on the Properties of Glass Polyalkenoate Cements. Part I: Influence of Aluminium to Silicon Ratio, Biomaterials, 20 (17). 1579-1586.
30. DeBruyne, M.A.A. and DeMoor, R.J.G. (2004). The Use of Glass Ionomer Cements in Both Conventional and Surgical Endodontics, International Endodontics Journal, 37: 91-104.
31. Ma, Z.J. and Yamaguchi, M. (2001). Stimulatory Effect of Zinc on Deoxyribonucleic Acid Synthesis in Bone Growth of Newborn Rats: Enhancement with Zinc and Insulin-like Growth Factor-I, Calcified Tissue International, 69 (3). 158-163. (Pubitemid 32912233)
32. Polizzi, S., Pira, E., Ferrara, M., Bugiani, M., Papaleo, A., Albera, R. and Palmi, S. (2002). Neurotoxic Effects of Aluminium Among Foundry Workers and Alzheimer's Disease, NeuroToxicology, 23 (6). 761-774.
33. Reusche, E., Pilz, P., Oberascher, G., Lindner, B., Egensperger, R., Gloeckner, K., Trinka, E. and Iglseder, B. (2001). Subacute Fatal Aluminum Encephalopathy after Reconstructive Otoneurosurgery: A Case Report, Human Pathology, 32 (10). 1136-1140.
34. Sawai, J., Shoji, S., Igarashi, H., Hashimoto, A., Kokugan, T., Shimizu, M. and Kojima, H. (1998). Hydrogen Peroxide as an Antibacterial Factor in Zinc Oxide Powder Slurry, Journal of Fermentation and Bioengineering, 86 (5). 521-522.
35. Wren, A., Boyd, D. and Towler, M. (2008). The Processing, Mechanical Properties and Bioactivity of Strontium based Glass Polyalkenoate Cements, Journal of Materials Science: Materials in Medicine, 19 (4). 1737-1743.
36. ISO 9917 Specification for Dental Water-based Cements. (1994).
37. Williams, J.A., Billington, R.W. and Pearson, G.J. (2002). The Effect of the Disc Support System on Biaxial Tensile Strength of a Glass Ionomer Cement, Dental Materials, 18 (5). 376-379.
38. Kokubo, T. and Takadama, H. (2006). How Useful is SBF in Predicting in Vivo Bone Bioactivity ? Biomaterials, 27 (15). 2907-2915.
39. Boyd, D., Towler, M., Watts, S., Hill, R., Wren, A. and Clarkin, O. (2008). The Role of Sr2+ on the Structure and Reactivity of SrO-CaO-ZnO-SiO2 Ionomer Glasses, Journal of Materials Science: Materials in Medicine, 19 (2). 953-957.
40. Boyd, D., Clarkin, O.M., Wren, A.W. and Towler, M.R. (2008). Zinc-based Glass Polyalkenoate Cements with Improved Setting Times and Mechanical Properties, Acta Biomaterialia, 4 (2). 425-431.
41. Palin, W.M., Fleming, G.J.P., Trevor Burke, F.J., Marquis, P.M. and Randall, R.C. (2003). The Reliability in Flexural Strength Testing of a Novel Dental Composite, Journal of Dentistry, 31 (8). 549-557.
42. Griffin, S. and Hill, R. (1998). Influence of Poly(acrylic acid) Molar Mass on the Fracture Properties of Glass Polyalkenoate Cements, Journal of Materials Science, 33 (22). 5383-5396. (Pubitemid 128511173)
43. Sullivan, A. and Hill, R. (2000). Influence of Poly(acrylic acid) Molar Mass on the Fracture Properties of Glass Polyalkenoate Cements based on Waste Gasifier Slags, Journal of Materials Science, 35: 1125-1134. (Pubitemid 30556016)
44. Wilson, A.D., Crisp, S. and Abel, G. (1977). Characterization of Glass-ionomer Cements. 4. Effect of Molecular Weight on Physical Properties, Journal of Dentistry, 5 (2). 117-120.
45. Karihaloo, B.L. (1979). A Note on Complexities of Compression Failure, In: Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 368(1735): 483-493.
46. Kendall, K. (1978). Complexities of Compression Failure. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 361(1705): 245-263.
47. Darvel, B.W. (1990). Uniaxial Compression Tests and the Validity of Indirect Tensile Strength, Journal of Materials Science, 25: 757-780.
48. Fennell, B. and Hill, R.G. (2001). The Influence of Poly(acrylic acid) Molar Mass and Concentration on the Properties of Polyalkenoate Cements Part II Young's Modulus and Flexural Strength, Journal of Materials Science, 36 (21). 5177-5183. (Pubitemid 33092930)
49. Boyd, D., Li, H., Tanner, D., Towler, M. and Wall, J. (2006). The Antibacterial Effects of Zinc Ion Migration from Zinc-based Glass Polyalkenoate Cements, Journal of Materials Science: Materials in Medicine, 17 (6). 489-494.
50. Barry, T.I., Clinton, D.J. and Wilson, A.D. (1979). The Structure of a Glass-ionomer Cement and its Relationship to the Setting Process, Journal of Dental Research, 58 (3). 1072-1079.
51. Goto, K., Tajima, N., Chosa, E., Totoribe, K., Kuroki, H., Arizumi, Y. and Arai, T. (2002). Mechanical Analysis of the Lumbar Vertebrae in a Three-dimensional Finite Element Method Model in Which Intradiscal Pressure in the Nucleus Pulposus was Used to Establish the Model, Journal of Orthopaedic Science, V7 (2). 243-246.
52. Higgs, W.A.J., Lucksanasombool, P., Higgs, R.J.E.D. and Swain, M.V. (2001). Evaluating Acrylic and Glass-ionomer Cement Strength Using the Biaxial Flexure Test. Biomaterials, 22 (12). 1583-1590.
53. Bogduk, N. (2003). Clinical Anatomy of the Lumbar Spine and Sacrum, 3 rd edn, p. 261, Elsevier Science Limited, London.
54. Boyd, D., Towler, M., Wren, A., Clarkin, O. and Tanner, D. (2008). TEM Analysis of Apatite Surface Layers Observed on Zinc based Glass Polyalkenoate Cements, Journal of Materials Science, 43 (3). 1170-1173.
55. Kanzaki, N., Onuma, K., Treboux, G., Tsutsumi, S. and Ito, A. (2000). Inhibitory Effect of Magnesium and Zinc on Crystallization Kinetics of Hydroxyapatite (0001) Face, Journal of Physical. Chemistry B, 104 (17). 4189-4194.
56. Olszta, M.J., Cheng, X., Jee, S.S., Kumar, R., Kim, Y.-Y., Kaufman, M.J., Douglas, E.P. and Gower, L.B. (2007). Bone Structure and Formation: A New Perspective, Materials Science and Engineering: R: Reports, 58 (3-5). 77-116.
57. Posner, A.S., Betts, F. and Blumenthal, N.C. (1978). Properties of Nucleating Systems, Metabolic Bone Disease and Related Research, 1 (2). 179-183.
58. Julien, M., Khairoun, I., LeGeros, R.Z., Delplace, S., Pilet, P., Weiss, P., Daculsi, G., Bouler, J.M. and Guicheux, J. (2007). Physico-chemical- mechanical and In Vitro Biological Properties of Calcium Phosphate Cements with Doped Amorphous Calcium Phosphates, Biomaterials, 28 (6). 956-965.
59. Kamitakahara, M., Kawashita, M., Kokubo, T. and Nakamura, T. (2001). Effect of Polyacrylic Acid on the Apatitie Formation of a Bioactive Ceramic in Simulated Body Fluid: Fundamental Examination of the Possibility of Obtaining Bioactive Glass-ionomer Cements for Orthopaedic Use, Biomaterials, 22: 3191-3196.
60. Kokubo, T., Ito, S., Huang, Z.T., Hayashi, T., Sakka, S., Kitsugi, T. and Yamamuro, T. (1990). Ca, P-rich Layer Formed on High-strength Bioactive Glass-ceramic A-W, Journal of Biomedical Materials Research, 24 (3). 331-343.
61. Brook, I.M. and Hatton, P.V. (1998). Glass-ionomers: Bioactive Implant Materials, Biomaterials, 19 (6). 565-571.
62. Blumenthal, N.C. and Posner, A.S. (1984). In Vitro Model of Aluminium-induced Osteomalacia: Inhibition of Hydroxyapatite Formation and Growth, Calcified Tissue International, 36 (4). 439-441.