Long-term contact-coupled wear prediction for metal-on-metal total hip joint replacement

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 223, Issue 7, 2009, Pages 993-1001

  Harun, M N ^a   Wang, F C ^b   Jin, Z M ^c   Fisher, J ^c  

^a UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

^b University of Bath   (United Kingdom)

^c UNIVERSITY OF LEEDS   (United Kingdom)

Author keywords

Biotribology; Hip joint replacement; Metal on metal; Wear

Indexed keywords

ACETABULAR CUP; ARCHARD'S EQUATION; ASEPTIC LOOSENING; BEARING SURFACES; BIOTRIBOLOGY; COMPUTATIONAL SIMULATION; CONTACT AREAS; CONTACT PRESSURES; DIAMETRAL CLEARANCE; FEMORAL HEADS; FINITE-ELEMENT MODELS; HIP IMPLANTS; HIP JOINT REPLACEMENT; HIP SIMULATOR STUDIES; LUBRICATING FILMS; METAL-ON-METAL; METAL-ON-METAL HIP JOINTS; TOTAL HIP JOINTS; UHMW-PE; VOLUMETRIC WEAR; WEAR GENERATION; WEAR PREDICTION; WEAR PROCESS; WEAR SIMULATION;

FINITE ELEMENT METHOD; HIP PROSTHESES; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES;

METALS;

EID: 76549102207     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501JET592     Document Type: Conference Paper

References (46)

1. Tipper, J. L., Ingham, E., Hailey, J. L., Besong, A. A., Fisher, J., Wroblewski, B. M., and Stone, M. H. Quantitative analysis of polyethylene wear debris, wear rate and head damage in retrieved Charnley hip prostheses. J.Mater. Sci.,Mater.Med., 1999b, 11, 117-124.
2. Wagner, H. and Wagner, M. Metal/metal articulating interfaces. Orthopedics, 1996, 19, 749-752.
3. Ingham, E. and Fisher, J. Biological reactions to wear debris in total joint replacement. Proc. IMechE, Part H: J. Engineering in Medicine, 2000, 214, 21-37. DOI: 10.1243/0954411001535219. (Pubitemid 32508299)
4. Brown, C., Fisher, J., and Ingham, E. Biological effects of clinically relevant wear particles from metal-on-metal hip prostheses. Proc. IMechE, Part H: J. Engineering in Medicine, 2006, 220, 355-369. DOI: 10.1243/095441105 X63291.
5. Medley, J. B., Chan, F.W., Krygier, J. J., and Bobyn, J. D. Comparison of alloys and designs in a hip simulator study of metal on metal implants. Clin. Orthop. Related Res., 1996, 329, S148-S159.
6. Jin, Z. M. and Dowson, D. A full numerical analysis of hydrodynamic lubrication in artificial hip joint replacements constructed from hard materials. Proc. IMechE, Part H: J. Engineering in Medicine, 1999, 213, 355-370. DOI: 10.1243/0954411991535185.
7. Huiskes, R. and Chao, E. Y. S. A survey of finite-element analysis in orthopedic biomechanics-the 1st decade. J. Biomech., 1983, 16, 385.
8. Brekelmans,W. A. M., Poort, H.W., and Slooff, T. J. J. H. New method to analyse the mechanical behaviour of skeletal parts. Acta Orthop. Scand., 1972, 43(5), 301-317.
9. Rybicki, E. F., Weis, E. B., and Simonen, F. A. Mathematical-analysis of stress in human femur. J. Biomech., 1972, 5, 203.
10. Scholten, R. Ueber die berchnung der mechanischen beanspruchung in knochenstrukturen mittel fuer den flugzeugbau entwickelter rechenverfahren.Med. orthop. Tech., 1975, 6, 130-138.
11. Jagatia, M. and Jin, Z. M. Analysis of elastohydrodynamic lubrication in a novel metal-on-metal hip joint replacement. Proc. IMechE, Part H: J. Engineering in Medicine, 2002, 216, 185-193. DOI: 10.1243/0954411 021536397. (Pubitemid 34691321)
12. Udofia, I. J. and Jin, Z. M. Elastohydrodynamic lubrication analysis of metal-on-metal hip-resurfacing prostheses. J. Biomech., 2003, 36, 537-544.
13. Verdonschot, N., Tanck, E., and Huiskes, R. Effects of prosthesis surface roughness on the failure process of cemented hip implants after stem-cement debonding. J. Biomed.Mater. Res., 1998, 42, 554-559.
14. Brown,T.D.,Stewart,K. J.,Nieman,J. C.,Pedersen,D. R., and Callaghan, J. J. Local head roughening as a factor contributing to variability of total hip wear: a finite element analysis. Trans. ASME, J. Appl. Mech., 2002, 124, 691-698.
15. Raimondi, M. T., Santambrogio, C., Pietrabissa, R., Raffelini, F.,andMolfetta, L. Improved mathematical model of the wear of the cup articular surface in hip joint prostheses and comparison with retrieved components. Proc. IMechE, Part H: J. Engineering in Medicine, 2001, 215, 377-390. DOI: 10.1243/0954411011535966. (Pubitemid 34449624)
16. Mirghany, M. and Jin, Z. M. Prediction of scratch resistance of cobalt chromium alloy bearing surface, articulating against ultra-high molecular weight polyethylene, due to third-body wear particles. Proc. IMechE, Part H: J. Engineering in Medicine, 2004, 218, 41-50. DOI: 10.1243/095441104322807749.
17. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J. 3-dimensional sliding/contact computational simulation of total hip wear. Clin. Orthop. Related Res., 1996, 333, 41-50.
18. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J. Adaptive finite element modeling of long-term polyethylene wear in total hip arthroplasty. J. Orthop. Res., 1996, 14, 668-675.
19. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J. Sliding-distance-coupled finite element formulation for polyethylene wear in total hip arthroplasty. J. Biomech., 1996, 29, 687-692.
20. Maxian, T. A., Brown, T. D., Pedersen, D. R., McKellop, H. A., Lu, B., and Callaghan, J. J. Finite element analysis of acetabular wear-validation, and backing and fixation effects. Clin. Orthop. Related Res., 1997, 344, 111-117.
21. Teoh, S. H., Chan,W. H., and Thampuran, R. An elastoplastic finite element model for polyethylene wear in total hip arthroplasty. J. Biomech., 2002, 35, 323-330.
22. Bevill, S. L., Bevill, G. R., Penmetsa, J. R., Petrella, A. J., and Rullkoetter, P. J. Finite element simulation of early creep and wear in total hip arthroplasty. J. Biomech., 2005, 38, 2365-2374.
23. Kang, L.,Galvin, A. L.,Brown,T.D., Jin, Z. M.,and Fisher, J. Mapping of cross-shear and wear factor in the hip under physiological duty cycles. In Proceedings of the 53rd AnnualMeeting, Orthopaedic Research Society, San Diego, California, USA, 2007.
24. Sfantos, G. K. and Aliabadi, M. H. Total hip arthroplasty wear simulation using the boundary element method. J. Biomech., 2007, 40, 378-389.
25. Jagatia, M. and Jin, Z. M. Elastohydrodynamic lubrication analysis of metal-on-metal hip prostheses under steady state entraining motion. Proc. IMechE, Part H: J. Engineering in Medicine, 2001, 215, 531-541. DOI: 10.1243/095441101536136.
26. Chan, F.W., Bobyn, J. D.,Medley, J. B., Krygier, J. J., and Tanzer,M.TheOttoAufranc award-wearandlubrication of metal-on-metal hip implants. Clin. Orthop. Related Res., 1999, 369, 10-24.
27. Johnston, R. C. and Smidt, G. L. Measurement of hip-joint motion during walking-evaluation of an electrogoniometric method. J. Bone Jt Surg. Am., 1969, 51, 1083.
28. Paul, J.P. Forces transmitted by joints in thehumanbody. Proc. InstnMech. Engrs, 1966, 181(37), 8-15.
29. Harun, M. N., Wang, F. C., Jin, Z. M., and Fisher, J. Development of computational wear simulation of metal-on-metal hip joint replacement. In Proceedings of the 53rd Annual Meeting, Orthopedic Research Society, San Diego, California, USA, 11-14 February 2007, poster no. 1661.
30. Saikko, V. and Calonius, O. Slide track analysis of the relative motion between femoral head and acetabular cup in walking and in hip simulators. J. Biomech., 2002, 35, 455-464.
31. Firkins,P. J.,Tipper, J. L.,Saadatzadeh,M.R., Ingham,E., Stone, M. H., Farrar, R., and Fisher, J. Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator. BioMed.Mater. Eng., 2001, 11, 143-157.
32. Anissian, H. L., Stark, A., Good, V., Dahlstrand, H., and Clarke, I. C. The wear pattern in metal-on-metal hip prostheses. J. Biomed.Mater. Res., 2001, 58, 673-678.
33. Rieker, C.,Konrad,R.,and Schon,R. In vitro comparison of the two hard-hard articulations for total hip replacements. Proc. IMechE, Part H: J. Engineering in Medicine, 2001, 215, 153-160. DOI: 10.1243/0954411011533715. (Pubitemid 34448615)
34. Scholes, S. C., Green, S. M., and Unsworth, A. The wear of metal-on-metal total hip prostheses measured in a hip simulator. Proc. IMechE, Part H: J. Engineering in Medicine, 2001, 215, 523-530. DOI: 10.1243/ 0954411011536118. (Pubitemid 34449603)
35. Tipper, J. L., Firkins, P. J., Besong, A. A., Barbour, P. S. M., Nevelos, J., Stone, M. H., Ingham, E., and Fisher, J. Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramicon-ceramic hip prostheses generated in a physiological anatomical hip joint simulator.Wear, 2001, 250, 120-128.
36. Dowson, D., Hardaker, C., Flett, M., and Isaac, G. H. A hip joint simulator study of the performance of metalon-metal joints-part II: design. J. Arthroplasty, 2004, 19, 124-130. (Pubitemid 39575841)
37. Essner, A., Sutton, K., and Wang, A. Hip simulator wear comparison of metal-on-metal, ceramic-onceramic and crosslinked uhmwpe bearings.Wear, 2005, 259, 992-995.
38. Sieber, H. P., Rieker, C. B., and Kottig, P. Analysis of 118 second-generation metal-on-metal retrieved hip implants. J. Bone Jt Surg. Br., 1999, 81, 46-50.
39. Reinisch, G., Judmann, K. P., Lhotka, C., Lintner, F., and Zweymulller, K. A. Retrieval study of uncemented metal-metal hip prostheses revised for early loosening. Biomaterials, 2003, 24, 1081-1091.
40. Goldsmith, A. A. J., Dowson, D., Wroblewski, B. M., Siney, P. D., Fleming, P. A., Lane, J. M., Stone, M. H., and Walker, R. Comparative study of the activity of total hip arthroplasty patients and normal subjects. J. Arthroplasty, 2001, 16, 613-619. (Pubitemid 32751448)
41. Bergmann, G., Graichen, F., and Rohlmann, A. Hip-joint loading during walking and running, measured in 2 patients. J. Biomech., 1993, 26, 969-990.
42. Streicher,R. M., Semlitsch, M., Schon, R.,Weber, H., and Rieker, C. Metal-on-metal articulation for artificial hip joints: laboratory study and clinical results. Proc. IMechE, Part H: J. Engineering in Medicine, 1996, 210, 223-232. DOI: 10.1243/PIME-PROC-1996-210-416.02.
43. McKee, G. K. Development of total prosthetic replacement of hip. Clin. Orthop. Related Res., 1970, 72, 85.
44. McKellop, H., Park, S. H., Chiesa, R., Doorn, P., Lu, B., Normand, P., Grigoris, P., and Amstutz, H. In vivo wear of 3 types of metal on metal hip prostheses during 2 decades of use. Clin. Orthop. Related Res., 1996, 329, S128-S140.
45. Walker, P. S. and Gold, B. L. Tribology (friction, lubrication and wear) of all-metal artificial hip joints. Wear, 1971, 17, 285.
46. Yew, A., Jagatia, M., Ensaff, H., and Jin, Z. M. Analysis of contact mechanics in Mckee-Farrar metal-on-metal hip implants. Proc. IMechE, Part H: J. Engineering in Medicine, 2003, 217, 333-340.