Stress generated during drying of saturated porous media

Transport in Porous Media

Volumn 80, Issue 3, 2009, Pages 519-536

  Mihoubi, D ^a   Bellagi, A ^b  

^a RESEARCH AND TECHNOLOGY CENTER OF ENERGY   (Tunisia)

^b UNIVERSITY OF MONASTIR   (Tunisia)

Author keywords

Heat transfer; Mass transfer; Strain; Stress

Indexed keywords

DRYING CURVES; HEAT AND MASS TRANSFER; INDUCED STRESS; NUMERICAL CALCULATION; SATURATED POROUS MEDIA; SPATIOTEMPORAL DISTRIBUTIONS; STRESS EQUATION; TWO-PHASE MEDIA;

DEWATERING; HEAT EXCHANGERS; HEAT TRANSFER; POROUS MATERIALS;

MASS TRANSFER;

HEAT TRANSFER; MASS TRANSFER; MODELING; NUMERICAL METHOD; POROUS MEDIUM; SHEAR STRESS;

EID: 76149123531     PISSN: 01693913     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11242-009-9378-1     Document Type: Article

References (36)

1. Banaszak, J., Kowalski, S. J.: Drying induced stresses estimated on the base of elastic and viscoelastic models. Chem. Eng. J. 86, 139-143 (2002). doi: 10. 1016/S1385-8947(01)00281-9.
2. Bird R. B., Steward W. E., Lighfoot E. N.: Transport Phenomena. Wiley, Newyork (2002).
3. Chemkhi, S., Zagrouba, F., Bellagi, A.: Mathematical model for drying of highly shrinkable media. Dry. Technol. 22, 1023-1039 (2004). doi: 10. 1081/DRT-120038578.
4. Couture F., Laurent S., Roques M. A.: Drying of two-phase media: simulation with liquid pressure as driven force. AlChE J. 53, 1703-1717 (2007).
5. Crank, J.: The Mathematics of Diffusion, Oxford University Press, London (1990).
6. Hasatani, M., Itaya, Y.: Fundamental study on shrinkage of formed clay during drying. Viscoelastic strain-stress and heat/moisture transfer. Dry. Technol. 10, 1013-1036 (1992). doi: 10. 1080/07373939208916493.
7. Hasatani, M., Itaya, Y.: Drying induced strain and stress: a review. Dry. Technol. 14, 1011-1040 (1996). doi: 10. 1080/07373939608917138.
8. Jomaa, W., Puiggali, J. R.: Drying of shrinkage materials: modelling with shrinkage velocity. Dry. Technol. 9, 1271-1293 (1991). doi: 10. 1080/07373939108916750.
9. Katekawa, M. E., Silva, M. A.: A review of drying models including shrinkage effects. Dry. Technol. 24, 5-20 (2006). doi: 10. 1080/07373930500538519.
10. Kechaou, N.: Séchage des gels fortement déformables: études de la diffusion interne de l'eau et modélisation. Institut National Polytechnique de Loraine (1989).
11. Ketelaars A. A. J.: Drying Deformable Media, Kinetics, Shrinkage and Stress. University of Eindhoven, Eindhoven (1993).
12. Ketelaars, A. A. J., Jomaa, W., Puiggali, J. R., Coumans, W. J.: Drying shrinkage and stress, Drying'92, International Drying Symposium, Part A, pp. 293-303 (1992).
13. Ketelaars, T., Pel, L., Coumans, W. J., Kerkhof, P. J. A. M.: Drying kinetics: a comparison of diffusion coefficients from moisture concentration profiles and drying curves. Chem. Eng. Sci. 50, 1187-1191 (1995). doi: 10. 1016/0009-2509(94)00494-C.
14. Kowalski S. J.: Thermomechanics of Drying Processes. Springer, Berlin (2003).
15. Kowalski, S. J.: Guest editorial: R& D in thermo-hydro-mechanical aspect of drying. Dry. Technol. 26, 258-259 (2008). doi: 10. 1080/07373930801897382.
16. Kowalski, S. J., Rajewska, K.: Drying induced stresses in elastic and viscoelastic saturated materials. Chem. Eng. Sci. 57, 3883-3892 (2002). doi: 10. 1016/S0009-2509(02)00307-X.
17. Kowalski S. J., Rybicki A.: Interaction of thermal and moisture stresses in materials dried convectively. Arch. Mech. 46, 251-265 (1994).
18. Kowalski, S. J., Rybicki, A.: Drying stress formation induced by inhomogeneous moisture and temperature distribution. Transp. Porous Media 24, 139-156 (1996a). doi: 10. 1007/BF00139842.
19. Kowalski, S. J., Rybicki, A.: Drying stress formation induced by inhomogeneous moisture and temperature distribution. Transp. Porous Media 24, 239-248 (1996b). doi: 10. 1007/BF00139842.
20. Kowalski, S. J., Rybicki, A.: Computer simulation of drying. Optim. Control Transp. Porous Media 34, 227-238 (1999). doi: 10. 1023/A: 1006521726842.
21. Kowalski, S. J., Rybicki, A.: The vapour-liquid interface and stresses in dried bodies. Transp. Porous Media 66, 43-58 (2007). doi: 10. 1007/s11242-006-9021-3.
22. Kowalski, S. J., Musielak, G., Rybicki, A.: The response of dried materials to drying conditions. Int. J. Heat Mass Transf. 40, 1217-1226 (1997). doi: 10. 1016/0017-9310(96)00141-X.
23. Kowalski, S. J., Rajewska, K., Rybicki, A.: Mechanical effects in saturated capillary-porous materials during convective and microwave drying. Dry. Technol. 22, 2291-2308 (2004). doi: 10. 1081/DRT-200040004.
24. Mihoubi, D.: Deshydratation d'argiles par compression et séchage. Aspects de modélisation et de simulation, université de Pau et des Pays de l'Adour (2004).
25. Mihoubi, D., Bellagi, A.: Two-dimensional heat and mass transfer during drying of deformable media. Appl. Math. Model. 32, 303-314 (2008). doi: 10. 1016/j. apm. 2006. 12. 003.
26. Mihoubi, D., Zagrouba, F., Vaxelaire, J., Bellagi, A., Roques, M.: Transfer phenomena during the drying of a shrinkable product: modelling and simulations. Dry. Technol. 22, 91-109 (2004a). doi: 10. 1081/DRT-120028216.
27. Mihoubi, D., Zagrouba, F., Vaxelaire, J., Bellagi, A., Roques, M.: Transfer phenomena during the drying of a shrinkable product: modelling and simulations. Dry. Technol. 22, 91-109 (2004b). doi: 10. 1081/DRT-120028216.
28. Moyne C., Kechaou N., Do Amral Sobral P. J., Roques M., Cairault A., Bizot H.: Mechanism of water transport in drying of gels. Int. Chem. Eng. 34, 360-369 (1994).
29. Rybicki A.: Determination of drying induced stresses in a prismatic bar. Eng. Trans. 41, 139-156 (1993).
30. Whitaker, S.: Fundamental Principles of Heat Transfer, Pergamon Press Inc., New York (1972).
31. Whitaker S.: Simultaneous heat, mass and momentum transfer in porous media: a theory of drying. Adv. Heat Transf. 13, 119-203 (1977).
32. Whitaker, S.: Flow in porous media I: a theoretical derivation of Darcy's law. Transp. Porous Media 1, 3-25 (1986a). doi: 10. 1007/BF01036523.
33. Whitaker, S.: Flow in porous media II: the governing equations for immiscible two phase flow. Transp. Porous Media 1, 127-154 (1986b). doi: 10. 1007/BF00714689.
34. Whitaker, S.: Flow in porous media III: deformable media. Transp. Porous Media 1, 127-154 (1986c). doi: 10. 1007/BF00714689.
35. Zagrouba, F.: Séchage mixte par convection et un apport rayonnant micro-ondes des milieux déformables. Modélisation des phénomènes de transferts de chaleur et de matière, Institut Nationale Polytechnique de Lorraine (1993).
36. Zagrouba, F., Mihoubi, D., Bellagi, A.: Drying of clay. II: rheological modelisation and simulation of physical phenomena. Dry. Technol. 20, 1895-1917 (2002). doi: 10. 1081/DRT-120015575.