Nondestructive evaluation of bone cement and bone cement/metal interface failure

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 92, Issue 2, 2010, Pages 420-429

  Browne, M ^a   Jeffers, J R T ^a   Saffari, N ^b  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

^b UNIVERSITY COLLEGE LONDON   (United Kingdom)

Author keywords

Acoustic emission; Bone cement; Interfacial failure; Ultrasonics

Indexed keywords

ACOUSTIC EMISSION SENSORS; BOND QUALITY; CRITICAL AREA; DELAMINATION PATTERNS; FAILURE MECHANISM; FATIGUE TESTS; HIP JOINT REPLACEMENT; IN-VITRO; INTERFACE FAILURE; INTERFACIAL FAILURE; INTERFACIAL FAILURES; INTERNAL CRACK PROPAGATION; LOADING CONDITION; METAL INTERFACE; NON DESTRUCTIVE EVALUATION; NOVEL TECHNIQUES; PROGRESSIVE DELAMINATION; STEM-CEMENT INTERFACES; TEST PIECES; TOTAL HIP REPLACEMENTS; ULTRASONIC TECHNIQUES;

ACOUSTIC EMISSION TESTING; ACOUSTIC EMISSIONS; BONE; CEMENTS; CRACK PROPAGATION; CRACKS; DAMAGE DETECTION; DELAMINATION; FAILURE (MECHANICAL); FATIGUE TESTING; HIP PROSTHESES; IMAGING SYSTEMS; OPTOELECTRONIC DEVICES; STEEL SHEET; ULTRASONIC IMAGING; ULTRASONIC TESTING; ULTRASONICS;

BONE CEMENT;

BONE CEMENT;

ACOUSTIC EMISSION SENSOR; ARTICLE; EVALUATION; FATIGUE; IMAGING SYSTEM; INTERFACE PRESSURE; MECHANICAL STRESS; PROSTHESIS LOOSENING; SENSOR; TENSILE STRENGTH; TOTAL HIP PROSTHESIS;

BONE CEMENTS; EQUIPMENT FAILURE ANALYSIS; MATERIALS TESTING; METALS; POLYMETHYL METHACRYLATE; POLYTETRAFLUOROETHYLENE; PROSTHESIS FAILURE; TENSILE STRENGTH; TRANSDUCERS; ULTRASONICS;

EID: 74749097968     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31530     Document Type: Article

References (36)

1. Kärrholm J, Garellick G, Herberts P. Swedish Hip Arthroplasty Register Annual Report 2006. Available at: www.jru. orthop.gu.se
2. Schmalzried TP, Kwong LM, Jasty M, Sedlacek RC, Haire TC, O'Connor DO, Bragdon CR, Kabo JM, Malcolm AJ, Path MRC, Harris WH. The mechanism of loosening of cemented acetabular components in total hip arthroplasty - Analysis of specimens retrieved at autopsy. Clin Orthop Relat Res 1992;274:60-78.
3. Race A, Miller MA, Ayers DC, Mann KA. Early cement damage around a femoral stem is concentrated at the cement/ bone interface. J Biomech 2003;36:489-496.
4. Huiskes R. Mechanical failure in total hip arthroplasty with cement. Curr Orthop 1993;7:239-247.
5. Topoleski LDT, Ducheyne P, Cuckler JM. Microstructural pathway of fracture in poly(methyl methacrylate) bonecement. Biomaterials 1993;14:1165-1172.
6. Klapach AS, Callaghan JJ, Goetz DD, Olejniczak JP, Johnston RC. Charnley total hip arthroplasty with use of improved cementing techniques-A minimum twenty-year follow-up study. J Bone Joint Surg Am 2001;83:1840-1848.
7. Espehaug B, Furnes O, Havelin LI, Engesaeter LB, Vollset SE. The type of cement and failure of total hip replacements. J Bone Joint Surg Br 2002;84:832-838.
8. Zhang YD, Putnam AW, Heiner AD, Callaghan JJ, Brown TD. Reliability of detecting prosthesis/cement interface radiolucencies in total hip arthroplasty. J Orthop Res 2002;20:683-687.
9. Murphy BP, Prendergast PJ. The relationship between stress, porosity and nonlinear damage accumulation in acrylic bone cement. J Biomed Mater Res A 2002;59:646-654.
10. Liu CT. Monitoring damage initiation and evolution in a .lled polymeric material using nondestructive testing techniques. Comput Struct 2000;76:57-65.
11. Ong CS, Saffari N. Ultrasonic evaluation of ultra-high molecular weight polyethylene used in medical prostheses. Proc Inst Mech Engrs Part H 1997;212:65-69.
12. Harris DO, Dunegan HL. Continuous monitoring of fatigue-crack growth by acoustic-emission techniques. Exp Mechanics 1974;14:71-81.
13. Jeffers JRT, Browne M, Taylor M. Damage accumulation, fatigue and creep behaviour of vacuum mixed bone cement. Biomaterials 2005;26:5532-5541.
14. Roques A, Browne M, Thompson J, Rowland C, Taylor A. Investigation of fatigue crack growth in acrylic bone cement using the acoustic emission technique. Biomaterials 2004;25: 769-778.
15. Roques A, Browne M, Taylor A, New A, Baker D. Quantitative measurement of the stresses induced during polymerisation of bone cement. Biomaterials 2004;25:4415-4424.
16. Mavrogordato M, Taylor M, Taylor A, Browne M. Acoustic emission monitoring and 3D visualization of polymerization-induced damage of acrylic polymer materials. J Biomed Mater Res B Appl Biomater 2009;90:223-228.
17. Qi G, Li J, Mann KA, Mouchon WP, Hamstad MA, Salehi A, Whitten SA. 3D real time methodology monitoring cement failures in THA. J Biomed Mater Res A 2004;71: 391-402.
18. Boczar T, Lorenc M. Determining the repeatability of acoustic emission generated by the Hsu-Nielsen calibrating source. Mol Quant Acoustics 2004;25:177-192.
19. Jeffers JRT, Browne M, Roques A, Taylor M. On the importance of considering porosity when simulating the fatigue of bone cement. J Biomech Eng 2005;127:563-570.
20. Sinnett-Jones PE, Browne M, Moffat AJ, Jeffers JRT, Saffari N, Buffière J-Y, Sinclair I. Crack initiation processes in acrylic bone cement. J Biomed Mater Res A 2009;89:1088-1097.
21. Jasty M, Moloney WJ, Bragdon CR, O'Connor D, Haire T, Harris WH. The initiation of failure in cemented femoral components of hip arthroplasties. J Bone Joint Surg Br 1991; 73:551-558.
22. Sundfeldt M, Carlsson LV, Johansson CB, Thomsen P, Gretzer C. Aseptic loosening, not only a question of wear: A review of different theories. Acta Orthopaed 2006;77:177-197.
23. Kohn DH. Acoustic emission and nondestructive evaluation of biomaterials and tissues. Crit Rev Biomed Eng 1995;22: 221-309.
24. Browne M, Roques A, Taylor A. The acoustic emission technique in orthopaedics - A review. J Strain Anal Eng Des 2005;40:59-79.
25. Akkus O, Jepsen KJ, Rimnac CM. Microstructural aspects of the fracture process in human cortical bone. J Mater Sci 2000;35:6065-6074.
26. Qi G, Pujol J, Fan Z. 3-D AE visualization of bone-cement fatigue locations. J Biomed Mater Res 2000;52:256-260.
27. Vaidya UK, Raju PK. Non invasive evaluation of the prosthetic hip joint using the acousto-ultrasonic technique. Am Soc Mech Eng Des Eng Div DE 1991;38:299-302.
28. Davies JP, Tse MK, Harris WH. In vitro evaluation of bonding of the cement-metal interface of a total hip femoral component using ultrasound. J Orthop Res 1995;13:335-338.
29. Davies JP, Tse MK, Harris WH. Monitoring the integrity of the cement-metal interface of total joint components in vitro using acoustic emission and ultrasound. J Arthroplasty 1996; 11:594-601.
30. Gilbert JL, Hasenwinkel JM, Wixson RL, Lautenschlager EP. A theoretical and experimental analysis of polymerization shrinkage of bone cement: A potential major source of porosity. J Biomed Mater Res A 2000;52:210-218.
31. Orr JF, Dunne NJ, Quinn C. Shrinkage stresses in bone cement. Biomaterials 2003;24:2933-2940.
32. Hoey D, Taylor D. Quantitative analysis of the effect of porosity on the fatigue strength of bone cement. Acta Biomater 2009;5:719-726.
33. Rauh MA, Bayers-Thering M, Madanagopal S, Krackow KA. A radiographic study of the detection limits of bone-cement remnants in total toint arthroplasty. J Arthroplasty 2002;17: 992-996.
34. Perez MA, Garcia-Aznar JM, Doblare M, Seral B, Seral F. A comparative FEA of the debonding process in different concepts of cemented hip implants. Med Eng Phys 2006;28:525-533.
35. Jones RE, Willie BM, Hayes H, Bloebaum RD. Analysis of 16 retrieved proximally cemented femoral stems. J Arthroplasty 2005;20:84-93.
36. Mohler CG, Callaghan JJ, Collis DK, Johnston RC. Early loosening of the femoral component at the cement-prosthesis interface after total hip replacement. J Bone Joint Surg Am 1995;77:1315-1322.