메뉴 건너뛰기




Volumn 48, Issue 1, 2010, Pages 45-68

Integrated simulation tool for quality support in the low-volume high-complexity electronics manufacturing domain

Author keywords

Integration; Simulation; Simulation applications

Indexed keywords

CURRENT PRACTICES; CUSTOMER REQUIREMENTS; DECISION SUPPORTS; DYNAMIC DOMAINS; ELECTRONICS MANUFACTURING; INTEGRATED SIMULATIONS; INTEGRATION SIMULATION; LEADTIME; MANUAL OPERATIONS; MANUFACTURING DEFECTS; PRINTED CIRCUIT BOARD MANUFACTURING; QUALITY SUPPORT; QUANTITATIVE RESULT; ROOT CAUSE ANALYSIS; SIMULATION APPLICATIONS; SIMULATION TOOL; WASTE REDUCTION;

EID: 74549155079     PISSN: 00207543     EISSN: 1366588X     Source Type: Journal    
DOI: 10.1080/00207540802427886     Document Type: Article
Times cited : (9)

References (36)
  • 1
    • 74549123538 scopus 로고    scopus 로고
    • ARENA, 2007. 11.00.00-CPR7. Rockwell Automation Technologies.
    • ARENA, 2007. 11.00.00-CPR7. Rockwell Automation Technologies.
  • 2
    • 0031677885 scopus 로고    scopus 로고
    • A consideration of modelling techniques that can be used to evaluate manufacturing strategies
    • Baines, T.S., et al., 1998. A consideration of modelling techniques that can be used to evaluate manufacturing strategies. The International Journal of Advanced Manufacturing Technology, 14 (5), 369-375.
    • (1998) The International Journal of Advanced Manufacturing Technology , vol.14 , Issue.5 , pp. 369-375
    • Baines, T.S.1
  • 3
    • 0037380538 scopus 로고    scopus 로고
    • An integrated multidimensional process improvement methodology for manufacturing systems
    • Chan, K. and Spedding, T., 2003. An integrated multidimensional process improvement methodology for manufacturing systems. Computers & Industrial Engineering, 44 (4), 673-693.
    • (2003) Computers & Industrial Engineering , vol.44 , Issue.4 , pp. 673-693
    • Chan, K.1    Spedding, T.2
  • 5
    • 0030259385 scopus 로고    scopus 로고
    • SimEnvir++: An object-based simulation environment
    • De Souza, R. and Zhang, Y., 1996. SimEnvir++: an object-based simulation environment. Computers in Industry, 30 (3), 211-217.
    • (1996) Computers in Industry , vol.30 , Issue.3 , pp. 211-217
    • De Souza, R.1    Zhang, Y.2
  • 6
    • 0038266795 scopus 로고    scopus 로고
    • A novel measurement technique for stencil printed solder paste
    • Dusek, M. and Hunt, C., 2003. A novel measurement technique for stencil printed solder paste. Soldering & Surface Mount Technology, 15 (2), 35-45.
    • (2003) Soldering & Surface Mount Technology , vol.15 , Issue.2 , pp. 35-45
    • Dusek, M.1    Hunt, C.2
  • 7
    • 28544443978 scopus 로고    scopus 로고
    • Internet-based electronics manufacturing troubleshooting tool for surface mount PCB assembly
    • Fidan, I., et al., 2006. Internet-based electronics manufacturing troubleshooting tool for surface mount PCB assembly. The International Journal, Advanced Manufacturing Technology, 27 (5/6), 561-567.
    • (2006) The International Journal, Advanced Manufacturing Technology , vol.27 , Issue.5-6 , pp. 561-567
    • Fidan, I.1
  • 8
    • 74549212997 scopus 로고    scopus 로고
    • Flying prober simplifies testing - using a flying-probe tester lets you eliminate manual testing
    • Freeman, M.T. and Foust, D., 1997. Flying prober simplifies testing - using a flying-probe tester lets you eliminate manual testing. Test & Measurement World, 17 (12), 17.
    • (1997) Test & Measurement World , vol.17 , Issue.12 , pp. 17
    • Freeman, M.T.1    Foust, D.2
  • 9
    • 0032070305 scopus 로고    scopus 로고
    • Agile manufacturing: Enablers and an implementation framework
    • Gunasekaran, A., 1998. Agile manufacturing: enablers and an implementation framework. International Journal of Production Research, 36 (5), 1223-1247.
    • (1998) International Journal of Production Research , vol.36 , Issue.5 , pp. 1223-1247
    • Gunasekaran, A.1
  • 10
    • 0032640805 scopus 로고    scopus 로고
    • Agile manufacturing: A framework for research and development
    • Gunasekaran, A., 1999. Agile manufacturing: a framework for research and development. International Journal of Production Economics, 62 (1), 87-105.
    • (1999) International Journal of Production Economics , vol.62 , Issue.1 , pp. 87-105
    • Gunasekaran, A.1
  • 11
    • 9444231685 scopus 로고    scopus 로고
    • Managing agility and productivity in the electronics industry
    • Helo, P., 2004. Managing agility and productivity in the electronics industry. Industrial Management & Data Systems, 104 (7), 567-577.
    • (2004) Industrial Management & Data Systems , vol.104 , Issue.7 , pp. 567-577
    • Helo, P.1
  • 12
    • 33749461111 scopus 로고    scopus 로고
    • Evaluation of techniques for manufacturing process analysis
    • Hernandez-Matias, J., et al., 2006. Evaluation of techniques for manufacturing process analysis. Journal of Intelligent Manufacturing, 17 (5), 571-583.
    • (2006) Journal of Intelligent Manufacturing , vol.17 , Issue.5 , pp. 571-583
    • Hernandez-Matias, J.1
  • 13
    • 74549123196 scopus 로고    scopus 로고
    • online, Synapse imaging. Available from:, Accessed 25 October 2007
    • Imaging, S., 2007. Solder paste inspection (in-line) [online]. Synapse imaging. Available from: http://www.synapseimaging.co.kr/eng/product/ engproduct4.php [Accessed 25 October 2007].
    • (2007) Solder paste inspection (in-line)
    • Imaging, S.1
  • 15
    • 0031642223 scopus 로고    scopus 로고
    • Discrete event simulation and cost analysis for manufacturing optimisation of an automotive LCM component
    • Kendall, K., et al., 1998. Discrete event simulation and cost analysis for manufacturing optimisation of an automotive LCM component. Composites Part A: Applied Science and Manufacturing, 29 (7), 711-720.
    • (1998) Composites Part A: Applied Science and Manufacturing , vol.29 , Issue.7 , pp. 711-720
    • Kendall, K.1
  • 17
    • 0033359713 scopus 로고    scopus 로고
    • CIMOSA: Enterprise engineering and integration
    • Kosanke, K., et al., 1999. CIMOSA: enterprise engineering and integration. Computers in Industry, 40 (2), 83-97.
    • (1999) Computers in Industry , vol.40 , Issue.2 , pp. 83-97
    • Kosanke, K.1
  • 18
    • 33744505842 scopus 로고    scopus 로고
    • Flexibility analysis of a surface mount technology electronic assembly plant: An integrated model using simulation
    • Lambert, S., et al., 2005. Flexibility analysis of a surface mount technology electronic assembly plant: an integrated model using simulation. International Journal of Flexible Manufacturing Systems, 17 (2), 151-167.
    • (2005) International Journal of Flexible Manufacturing Systems , vol.17 , Issue.2 , pp. 151-167
    • Lambert, S.1
  • 19
    • 0031219869 scopus 로고    scopus 로고
    • Development of a printed circuit board design for in-circuit test advisory system
    • Lawlor-Wright, T. and Gallagher, C., 1997. Development of a printed circuit board design for in-circuit test advisory system. Computers in Industry, 33 (2/3), 253-259.
    • (1997) Computers in Industry , vol.33 , Issue.2-3 , pp. 253-259
    • Lawlor-Wright, T.1    Gallagher, C.2
  • 20
    • 0025437042 scopus 로고
    • The harmfulness of re-working cosmetically defective solder joints
    • Lea, C., 1990. The harmfulness of re-working cosmetically defective solder joints. Soldering & Surface Technology, 5, 4-9.
    • (1990) Soldering & Surface Technology , vol.5 , pp. 4-9
    • Lea, C.1
  • 23
    • 0024087591 scopus 로고
    • Simulating the design and analysis of quality control systems in manufacturing
    • Palaniswami, S. and Hassan, M.Z., 1988. Simulating the design and analysis of quality control systems in manufacturing. Engineering Costs and Production Economics, 14 (3), 217-227.
    • (1988) Engineering Costs and Production Economics , vol.14 , Issue.3 , pp. 217-227
    • Palaniswami, S.1    Hassan, M.Z.2
  • 25
    • 0031250563 scopus 로고    scopus 로고
    • An agile manufacturing workcell design
    • Quinn, R.D., et al., 1997. An agile manufacturing workcell design. IIE Transactions, 29 (10), 901-909.
    • (1997) IIE Transactions , vol.29 , Issue.10 , pp. 901-909
    • Quinn, R.D.1
  • 26
    • 0033298614 scopus 로고    scopus 로고
    • Integrating simulation with activity-based management to evaluate manufacturing cell part sequencing
    • Rasmussen, R.R., et al., 1999. Integrating simulation with activity-based management to evaluate manufacturing cell part sequencing. Computers & Industrial Engineering, 37 (4), 757-768.
    • (1999) Computers & Industrial Engineering , vol.37 , Issue.4 , pp. 757-768
    • Rasmussen, R.R.1
  • 27
    • 0032157302 scopus 로고    scopus 로고
    • A methodology for integrating economic criteria in design and production management decisions
    • Senechal, O. and Tahon, C., 1998. A methodology for integrating economic criteria in design and production management decisions. International Journal of Production Economics, 56/57, 557-574.
    • (1998) International Journal of Production Economics , vol.56-57 , pp. 557-574
    • Senechal, O.1    Tahon, C.2
  • 28
    • 29144433561 scopus 로고    scopus 로고
    • Simulation studies of process flow with in-line part inspection in machining cells
    • Siemiatkowski, M. and Przybylski, W., 2006. Simulation studies of process flow with in-line part inspection in machining cells. Journal of Materials Processing Technology, 171 (1), 27-34.
    • (2006) Journal of Materials Processing Technology , vol.171 , Issue.1 , pp. 27-34
    • Siemiatkowski, M.1    Przybylski, W.2
  • 29
    • 3042692204 scopus 로고    scopus 로고
    • Survey on the use of simulation for manufacturing system design and operation
    • Smith, J.S., 2003. Survey on the use of simulation for manufacturing system design and operation. Journal of Manufacturing Systems, 22 (2), 157-171.
    • (2003) Journal of Manufacturing Systems , vol.22 , Issue.2 , pp. 157-171
    • Smith, J.S.1
  • 30
    • 0032737809 scopus 로고    scopus 로고
    • Application of discrete event simulation to the activity based costing of manufacturing systems
    • Spedding, T.A. and Sun, G.Q., 1999. Application of discrete event simulation to the activity based costing of manufacturing systems. International Journal of Production Economics, 58 (3), 289-301.
    • (1999) International Journal of Production Economics , vol.58 , Issue.3 , pp. 289-301
    • Spedding, T.A.1    Sun, G.Q.2
  • 31
    • 34247176232 scopus 로고    scopus 로고
    • A methodology for dynamic enterprise process performance evaluation
    • Tan, W., et al., 2007. A methodology for dynamic enterprise process performance evaluation. Computers in Industry, 58 (5), 474-485.
    • (2007) Computers in Industry , vol.58 , Issue.5 , pp. 474-485
    • Tan, W.1
  • 32
    • 74549221262 scopus 로고    scopus 로고
    • online, Library contents, online postgraduate courses for the electronics industry, University of Bolton, UK. Available from:, Accessed 5 May 2007
    • Tarr, M., n.d. Repair and rework [online]. Library contents, online postgraduate courses for the electronics industry, University of Bolton, UK. Available from: http://www.ami.ac.uk/courses/topics/0231-rar/index.html [Accessed 5 May 2007].
    • Tarr, M., n.d. Repair and rework
  • 34
    • 70349210181 scopus 로고    scopus 로고
    • Understanding the relationships between time and cost to improve supply chain performance
    • doi:10.1016/j.ijpe.2006.06.022
    • Whicker, L., et al., 2006. Understanding the relationships between time and cost to improve supply chain performance. International Journal of Production Economics, doi:10.1016/j.ijpe.2006.06.022: 63.
    • (2006) International Journal of Production Economics , pp. 63
    • Whicker, L.1
  • 35
    • 74549119368 scopus 로고    scopus 로고
    • WITNESS, 1996. Release 8.0. AT&T ISTEL Ltd
    • WITNESS, 1996. Release 8.0. AT&T ISTEL Ltd.
  • 36
    • 0001378506 scopus 로고    scopus 로고
    • Environmentally conscious design and manufacturing: A state-of-the-art survey
    • Zhang, H.C., et al., 1997. Environmentally conscious design and manufacturing: a state-of-the-art survey. Journal of Manufacturing Systems, 16 (5), 352-371.
    • (1997) Journal of Manufacturing Systems , vol.16 , Issue.5 , pp. 352-371
    • Zhang, H.C.1


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.