Fragility based damage assesment in existing precast industrial buildings: A case study for Turkey

Structural Engineering and Mechanics

Volumn 34, Issue 1, 2010, Pages 39-60

  Senel, Sevket Murat ^a   Kayhan, Ali Haydar ^a  

^a PAMUKKALE UNIVERSITY   (Turkey)

Author keywords

Damage estimation; Damage states; Fragility curves; Nonlinear analysis; Precast industrial buildings; Strain based damage

Indexed keywords

DUCTILITY; EARTHQUAKE EFFECTS; NONLINEAR ANALYSIS; OFFICE BUILDINGS; STIFFNESS;

DAMAGE ESTIMATION; DAMAGE STATE; FRAGILITY CURVES; INDUSTRIAL BUILDINGS; STRAIN BASED;

SEISMIC RESPONSE;

EID: 73949095433     PISSN: 12254568     EISSN: None     Source Type: Journal    
DOI: 10.12989/sem.2010.34.1.039     Document Type: Article

References (45)

1. Adalier, K. and Aydingun, O. (2001), "Structural engineering aspects of the June 27, 1998 Adana-Ceyhan (Turkey) earthquake", Eng. Struct., 23(4), 343-355.
2. Akkar, S. and Ozen, O. (2005), "Effect of peak ground velocity on deformation demands for SDOF systems", Earthq. Eng. Struct. D, 34, 1551-1571.
3. Akkar, S., Sucuoglu, H. and Yakut, A. (2005), "Displacement-based fragility functions for low and mid-rise ordinary concrete buildings", Earthq. Spectra, 21(4), 901-927.
4. Arslan, M.H., Korkmaz, H.H. and Gulay, FG (2005), "Damage and failure pattern of prefabricated structures after major earthquakes in Turkey and shortfalls of the turkish earthquake code", Eng. Fail. Anal, 13, 537-557.
5. Atakoy, H. (2000), "The August 17th Earthquake and the prefabricated structures built by the members of the prefabric union", Concrete Prefabrication, No:52-53 (in Turkish).
6. Ay, B.Ö., Erberik, M.A. and Akkar, S. (2006), "Fragility based assessment of the structural deficiencies in turkish RC frames structures", First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.
7. Chmielewski, T., Kratzig, W.B., Link, M., Meskouris, K. and Wunderlich, W. (1996), Phenomena and Evaluation of Dynamic Structural Responses, in Dynamics of Civil Engineering Structures, W.B. Kratzig and H.J. Niemann, (Eds.), A.A. Balkema, Rotterdams.
8. Cruz, A.M. and Steinberg, L.J. (2005), "Industry preparedness for earthquakes and earthquake-triggered hazmat accidents in the 1999 Kocaeli earthquake", Earthq. Spectra, 21(2), 285-304.
9. Elwood, K.J. and Eberhard. M.O. (2006), "Effective stiffness of reinforced concrete columns", PEER Research Digest, No. 2006-1.
10. Englekirk R.E. (2003), Seismic Design of Reinforced and Precast Concrete Buildings, John Wiley & Sons, Hoboken, New Jersey.
11. Erberik, M.A. (2007), "Fragility-based assessment of typical mid-rise and low-rise RC buildings in Turkey", Eng. Struct., 30, 1360-1374.
12. Erberik, M.A. and Elnashai, A.S. (2004), "Fragility analysis of flat-slab structures", Eng. Struct., 26, 937-948.
13. Ersoy, U. and Ozcebe, G (2001), Reinforced Concrete, Evrim Publications, Istanbul, (in Turkish)
14. Ersoy, U., Özcebe, G and Tankut, T. (2000), "Observed precast building damages in 1999 marmara and duzce earthquakes", 10th Prefabrication Symposium, Istanbul, (in Turkish).
15. Eurocode 8 (1998), "Design design provisions for earthquake resistance of structures", European Union, European Prestandarts, Brussel.
16. Fischinger, M., Kramar M. and Isakovic T., (2008), "Cyclic response of slender RC columns typical of precast industrial buildings", B. Earthq. Eng., 6, 519-534.
17. Hachem, M.M., Mahin, S.A. and Moehle, J.P. (2003), Performance of Circular Reinforced Concrete Bridge Columns under Bidirectional Earthquake Loading, Pacific Earthquake Engineering Research Center, PEER Rep. No. 2003-06, University of California
18. Karaesmen, E. (2001), Prefabrication in Turkey: Facts and Figures, Department of Civil Engineering, Middle East Technical University, Ankara, Turkey.
19. Karim, K.R. and Yamazaki, F. (2001) "Effect of earthquake ground motions on fragility curves of highway bridge piers based on numerical simulation", Earthq. Eng. Struct. D., 30, 1839-1856.
20. Karimi, K. and Bakhshi, A. (2006), "Development of fragility curves for unreinforced masonry buildings before and after upgrading using analytical method", First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.
21. Kayhan, A.H. (2008), Damage and Economic Loss Estimation for Pin Connected Precast Buildings, PhD Thesis, Pamukkale University, Denizli, November.
22. Kirçil, M.S. and Polat, Z. (2006), "Fragility analysis of mid-rise RC frame buildings", Eng. Struct., 28(9), 1335-1345.
23. Kowalsky, M.J. (1997), Direct Displacement-Based Design: A Seismic Design Methodology and Its Application to Concrete Bridges, PhD Dissertation, University of California, San Diego.
24. Newmark, N.M. (1959), "A method of computation for structural dynamics", J. Eng. Mech, ASCE, 85, 67-94.
25. Park, Y.J. and Ang, Ah.S. (1985), "Seismic damage analysis of reinforced concrete buildings", J. Struct. Eng., ASCE, 111(4), 740-757.
26. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley & Sons, New York.
27. Park, R., Priestley, M.J.N, and Gill, WD. (1982), "Ductility of square-confined concrete columns", J. Struct. Div., ASCE, 108(ST4), 929-950.
28. PEER Strong Ground Motion Database, http://peer.berkeley.edu/smcat/
29. Posada, M. and Wood, S.L. (2002), "Seismic performance of precast industrial buildings in Turkey", 7th National Conference on Earthquake Engineering (7NCEE), Boston.
30. Priestley, M.J.N., Seible, F. and Calvi, GM. (1996), Seismic Design and Retrofit of Bridges, John Wiley & Sons, New York.
31. Priestley, M.J.N., Calvi, GM. and Kowalsky, M.J. (2007), Displacement Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
32. Priestley, M.J.N., Sritharan, S., Conley, J.R. and Pampanin, S. (1999), "Preliminary results and conclusions from the PRESS five-story precast concrete test building", PCI J, 44(6), 42-67.
33. Rubinstein, R.Y. (1989), Simulation and the Monte Carlo Method, John Wiley & Sons, New York.
34. Saatcioglu, M., Mitchell, D., Tinawi, R., Gardner, N.J., Gillies, A.G, Ghobarah, A., Anderson, D.L. and Lau, D. (2001), "The August 17, 1999 Kocaeli (Turkey) earthquake-damage to structures". Can. J. Civil Eng., 28(8), 715-773.
35. SAP2000 (2004), Integrated Software for Structural Analysis & Design, Computers and Structures Inc., California, USA.
36. Sezen, H., Elwood, K.J., Whittaker, A.S., Mosalam, K.M., Wallace, J.W. and Stanton, J.F. (2000), Structural Engineering Reconnaissance of the August 17, 1999 Kocaeli (Izmit), Turkey Earthquake, PEER Rep. No.2000-09, Pacific Earthquake Engineering Research Center, University of California.
37. Sezen, H. and Whittaker, A.S. (2006), "Seismic performance of industrial facilities affected by the 1999 Turkey earthquake", J. Perform. Constr. Fac, 20(1), 28-36.
38. Shinozuka, M., Feng, M.Q., Kim, H.K. and Kim, S.H. (2000), "Nonlinear static procedure for fragility curve development", J. Eng. Mech., ASCE, 126(12), 1287-1295.
39. Shinozuka, M., Feng, M.Q., Lee, J. and Naganuma T. (2000), "Statistical analysis of fragility curves", J. Eng. Mech, ASCE, 126(12), 1224-1231.
40. TEC-1975, Turkish Earthquake Code (1975), Specifications for structures to be built in disaster areas, Ministry of Public Works and Settlement, Ankara, Turkey.
41. TEC-1998, Turkish Earthquake Code (1998), Specifications for structures to be built in disaster areas, Ministry of Public Works and Settlement, Ankara, Turkey.
42. TEC-2007, Turkish Earthquake Code (2007), Specifications for structures to be built in seismic areas, Ministry of Public Works and Settlement, Ankara, Turkey.
43. Tezcan, S.S. and Colakoglu, H.K. (2003), "Weak Points Of The TEC-98 Precast Building Code Provisions", Fifth National Conference on Earthquake Engineering, Istanbul, Turkey.
44. Uniform Building Code (1997), International Conference of Building Officials, Whittier, California.
45. Zorbozan M., Barka G ve Sarifakioglu F. (1998), "Observed precast building damages in ceyhan earthquake, reasons and solutions", Concrete Prefabrication, 48, 20-24 (in Turkish).