Friction and wear behavior of Ni-P coated Si3N4 reinforced Al6061 composites

Tribology International

Volumn 43, Issue 3, 2010, Pages 623-634

  Ramesh, C S ^a   Keshavamurthy, R ^a   Channabasappa, B H ^a   Pramod, S ^a  

^a PES UNIVERSITY   (India)

Author keywords

Friction; Metal matrix composite; Wear

Indexed keywords

COEFFICIENT OF FRICTIONS; DRY SLIDING FRICTION; ENERGY DISPERSIVE; FRICTION AND WEAR BEHAVIORS; LIQUID METALLURGIES; LOAD RANGE; MATRIX ALLOY; MATRIX COMPOSITE; METAL MATRIX COMPOSITES; METAL-MATRIX COMPOSITE; NICKEL COATED; PIN ON DISK; SEM; SLIDING VELOCITIES; TRIBOLOGICAL PROPERTIES; WEAR DEBRIS; WEAR MECHANISMS; WEAR RATES; WORN SURFACE; X-RAY PHOTOELECTRON SPECTROSCOPE; XPS;

DEBRIS; FRICTION; NICKEL ALLOYS; NICKEL METALLURGY; PARTICLE REINFORCED COMPOSITES; PLASTICS FILLERS; SCANNING ELECTRON MICROSCOPY; SILICON ALLOYS; SILICON NITRIDE; TRIBOLOGY; WEAR OF MATERIALS; X RAY DIFFRACTION;

METALLIC MATRIX COMPOSITES;

EID: 73149106172     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2009.09.011     Document Type: Article

References (50)

1. Cocen U., and Onel K. Ductility and strength extruded aluminum alloy composites. Comp Sci Technol 62 (2002) 275-282
2. Venkataraman B., and Sundararajan G. The sliding wear behavior of Al-SiC particulate composites-1, microbehaviour. Acta Mater 44 (1996) 451-460
3. De A.A., Gibson P.R., and Clegg A.J. Production and evaluation of squeeze cast graphite Al-Si-alloys. Mater Sci Technol 1 (1985) 559-567
4. 4C and Al-SiC composites worn under different contact pressures. Wear 261 (2006) 634-641
5. 3-SiC reinforced aluminum composites manufactured by casting or PM method. Mater Des 29 (2008) 2002-2008
6. Mondal D., Dutta B.K., and Panigrahi S.C. Wear properties of copper-coated short steel fiber reinforced stir cast Al-2Mg alloy composites. Wear 265 (2008) 930-939
7. Ramesh C.S., and Safiulla M. Wear behavior of hot extruded Al6061 based composites. Wear 263 (2007) 629-635
8. Hashim J., Looney L., and Hashmi M.S.J. Metal matrix composites production by stir casting method. J Mater Process Technol 92-93 (1999) 1-7
9. Asthana A.J. Reinforced cast metals, part II evolution of the interface. J Mater Sci 35 (1998) 1959-1980
10. Ramesh CS, Srinivas CK, Channabasappa BH, Avdani SS. Electroless nickel plating on silicon carbide particles for MMC applications. In: Kori SA, Esling C, editors. International symposium on advances in materials conference ISAMP-2007. Bagalkot, India. p. 150-4.
11. Leon C.A., and Drew R.A.L. Preparation of nickel-coated powders as precursors to reinforce metal matrix composites. J Mater Sci 35 (2000) 4763-4768
12. Foo K.S., and Drew R.A.L. Interface characterization of an SiC particulate/6061 aluminium alloy composite. Composites 25 (1994) 677-683
13. Ren S., He X., Qu X., and Li Y. Effect of controlled interfacial reaction on the microstructure and properties of the SiCp/Al composites prepared by pressureless infiltration. J Alloys Compd 455 (2008) 424-431
14. Ray S. Review: synthesis of cast metal matrix particulate composites. J Mater Sci 28 (1993) 5397-5413
15. Asthana R., and Rohatgi P.K. On the melt infiltration of plain and nickel-coated with aluminum alloys. J Mater Sci Lett 11 6 (1993) 442-445
16. Moustafa S.F., Badry S.A.L., Sanad A.M., and Kieback B. Friction and wear behavior of graphite-copper composites. Wear 253 (2002) 699-710
17. Davidson A.M., and Regener D. A comparisons of aluminum based MMC reinforced with coated and uncoated particulate SiC. Comp Sci Technol 60 (2000) 865-869
18. Zhan Y.Z., and Zhang G. The effect of interfacial modifying on the mechanical properties of SiCp/Cu composites. Mater Lett 57 (2003) 4583-4591
19. 2 composites. Wear 59 (2005) 602-608
20. 2 particulate composites. Wear 265 (2008) 134-142
21. Sudarshan, and Surappa M.K. Dry sliding wear of fly ash particulate reinforced A356 Al composites. Wear 265 (2008) 349-360
22. Takadoum J., Houmid-Bennani H., and Mairey D. The wear characteristics of silicon nitride. J Eur Ceram Soc 18 (1998) 553-556
23. Dong X., and Jahanmir S. Wear transition diagram for silicon nitride. Wear 165 (1993) 169-180
24. Akdogan G., and Stolarski T.A. Wear in metal silicon nitride sliding parts. Ceram Int 29 (2003) 435-446
25. 4 grains. Wear 254 (2003) 94-102
26. 4 reinforced Al6061 composites. Mater Sci Eng A 502 (2009) 99-106
27. Archard J.F. Contact and rubbing of flat surfaces. J Appl Phys 24 (1953) 981
28. In: Gale W.F., and Totemier T.C. (Eds). Smithells metals reference book. 8th ed (2004), Elsevier Butterworth, Heinemann, Oxford; Burlington p. 25-3-6
29. Dong X., and Jahanmir S. Wear transition diagram for silicon nitride. Wear 165 (1993) 169-180
30. Thakur S.K., and Dhinan B.K. The influence of interfacial characteristics between SiCp and Mg/Al metal matrix on wear, coefficient of friction and microhardness. Wear 247 (2001) 201
31. Kennedy F.E., Balahadur A.C., and Lashmore D.S. The friction and wear of Cu based silicon carbide particulate metal matrix composites for brake application. Wear 203 (1997) 715
32. Ramesh C.S., and Sheshadri S.K. Tribological characteristics of nickel based composite coatings. Wear 255 (2003) 893-902
33. 2 particles on sliding wear behavior of Al-4Cu alloy. Wear 262 (2007) 160-166
34. Venkataraman B., and Sundararajan G. Correlation between the characteristics of the mechanically mixed layer and wear behavior of aluminum, Al-7075 and Al MMCs. Wear 245 (2000) 22-38
35. Riahi A.R., and Alpas A.T. The role of tribo-layers on the sliding wear behavior of graphite aluminum matrix composites. Wear 251 (2001) 1396-1407
36. Ames W., and Alpas A.T. Wear mechanisms in hybrid composites of graphite -20% SiC in A356 aluminum alloy. Mater Met Trans 26A (1995) 85-98
37. Mondal D.P., Das S., Rao R.N., and Singh M. Effect of SiC addition on running in wear on the sliding wear behavior of Al-Zn-Mg aluminum alloy. Mater Sci Eng A 402 (2005) 307-319
38. Zhang J., and Alphas A.T. Transition between mild and severe wear in aluminium alloys. Acta Mater 45 (1997) 513-528
39. Vard avoulias M., Jouannt Tresy C., and Jeandin M. Sliding-wear behaviour of ceramic particle-reinforced high-speed steel obtained by powder metallurgy. Wear 165 (1993) 141-149
40. Zhang L.F., Zhang L.C., and Woo Y.W. Particle effects on friction and wear of aluminium matrix composites. J Mater Sci 30 (1995) 5999-6004
41. Wilson S., and Alphas A.T. Wear mechanism maps for metal matrix composites. Wear 212 (1997) 41-49
42. 2) composite. Wear 265 (2008) 14-26
43. Ramesh C.S., and Prasad T.B. Dry sliding wear behaviour of hypereutectic Al-Si-Carbon fibre metal matrix composites. Tribology 1 (2007) 97-202
44. Godet M. The third body approach: a mechanical view of wear. Wear 100 (1984) 437-452
45. Basavarajappa S., Chandramohan G., Mahadevan A., Thangavelu M., Subramanian R., and Gopalakrishnan P. Influence of sliding speed on the dry sliding wear behavior and the subsurface deformation on hybrid metal matrix composites. Wear 262 (2007) 1007-1012
46. Duis R.L., Subramanian S., and Yellup J.M. Dry sliding wear of aluminum composites-a review. Comp Sci Technol 57 (1997) 415-435
47. Kwok J.K.M., and Lim S.C. High speed tribological properties of some Al/SiCp composites, II wear mechanisms. Comp Sci Technol 59 (1999) 65-75
48. Modi O.P., Prasad B.K., Yeganeswaran A.H., and Vidya M.C. Dry sliding wear of squeeze cast aluminum alloy silicon carbide composites. Mater Sci Eng A 151 (1992) 235-245
49. Jahanmir S., and Suh N.P. Mechanics of subsurface void nucleation in delamination wear. Wear 44 (1977) 17-38
50. Suh N.P. The delamination theory of wear. Wear 25 (1973) 111-124