Three-dimensional modeling of in vitro hip kinematics under micro-separation regime for ceramic on ceramic total hip prosthesis: An analysis of vibration and noise

Journal of Biomechanics

Volumn 43, Issue 2, 2010, Pages 326-333

  Sariali, Elhadi ^a   Stewart, Todd ^a   Jin, Zongmin ^a   Fisher, John ^a  

^a NONE   (France)

Author keywords

Edge loading; Kinematics; Micro separation; Squeaking; Total hip prosthesis

Indexed keywords

COMPUTATIONAL MODEL; COMPUTATIONAL SIMULATION; COMPUTER MODELS; EDGE LOADING; EXPERIMENTAL CONDITIONS; EXPERIMENTAL MODELS; EXPERIMENTAL STUDIES; EXPERIMENTAL VALUES; HIGHER FREQUENCIES; HIP SIMULATORS; IN-VITRO; MICRO-SEPARATION; NOISE GENERATION; SOURCE OF NOISE; SWING PHASE; THEORETICAL VALUES; THREE-DIMENSIONAL MODELING; TOTAL HIP REPLACEMENTS; VIBRATION FREQUENCY; VIBRATORY FREQUENCY; WEAR RATES;

CERAMIC MATERIALS; HIP PROSTHESES; KINEMATICS; PROSTHETICS; SEPARATION; SIMULATORS; VIBRATION ANALYSIS;

THREE DIMENSIONAL;

ARTICLE; CERAMIC PROSTHESIS; COMPUTER SIMULATION; CONTROLLED STUDY; IN VITRO STUDY; JOINT FUNCTION; JOINT LAXITY; KINEMATICS; MATHEMATICAL MODEL; PRIORITY JOURNAL; PROSTHESIS LOOSENING; SOUND INTENSITY; TOTAL HIP PROSTHESIS; VALIDATION STUDY; VELOCITY; VIBRATION; WALKING; WEIGHT BEARING;

ACCELERATION; BIOMECHANICS; CERAMICS; COMPUTER SIMULATION; EQUIPMENT FAILURE ANALYSIS; FOURIER ANALYSIS; HIP PROSTHESIS; HUMANS; IMAGING, THREE-DIMENSIONAL; MODELS, BIOLOGICAL; NOISE; PROSTHESIS DESIGN; PROSTHESIS FAILURE; SOFTWARE; VIBRATION; WALKING;

EID: 72549086280     PISSN: 00219290     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jbiomech.2009.08.031     Document Type: Article

References (33)

1. Barbour, P., Stone, M., Fisher, J., 1998. A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates Proc. Instn. Mech. Engrs. 213 (Part H).
2. Christensen, C., Jacobs, C., 2008. Patient and surgery related factors for squeaking and non squeaking ceramic-on-ceramic total hip arthroplasties. In American Academy of Orthopaedic Surgeons 75th Annual Meeting. San Fransisco, USA.
3. Ecker T., Robbins C., Van Flandem G., Patch D., Steppacher S.D., Bierbaum B., and Murphy S.B. Squeaking in total hip replacement: no cause for concern. Orthopedics 31 (2008) 875
4. Glaser D., Dennis D., Komistek R., and Miner T. In vivo comparison of hip mechanics for minimally invasive versus traditional total hip arthroplasty. Clin. Biomech. 23 2 (2007) 127-134
5. Glaser D., Komistek R., Cates H., and Mahfouz M. Clicking and squeaking: in vivo correlation of sound and separation for different bearing surfaces. J. Bone Jt. Surg. Am. 90 Suppl. 4 (2008) 112-120
6. Jarret, C., Bruzzone, M., Rodriguez, J., Ranawat, C., 2007. The squeaking hip: an under-reported phenomenon of ceramic-on-ceramic total hip arthroplasty. In: Proceedings of the AAOS, Poster No. 198, San Diego, USA.
7. Keurentjes J.C., Kuipers R., Wever D., and Schreurs W. High incidence of squeaking in THAs with alumina ceramic-on-ceramic bearings. Clin. Orthop. Relat. Res. 466 (2007) 1438-1443
8. Komistek R., Dennis D., Ochoa J., Haas B., and Hammill C. In vivo comparison of hip separation after metal-on-metal or metal-on-polyethylene total hip arthroplasty. J. Bone Jt. Surg. Am. 84-A 10 (2002) 1836-1841
9. Landis J., and Koch G. The measurement of observer agreement for categorical data. Biometrics 33 (1977) 159
10. Lombardi A., Mallory T., Dennis D., Komisteck R., Fada R., and Northcut E. An in vivo determination of total hip arthroplasty pistoning during activity. J. Arthroplasty 15 6 (2000) 702-709
11. Magnissalis E., Xenakis T., and Chen Z. Wear of retrieved ceramic THA components four matched pairs retrieved after 5-13 years in service. J. Biomed Mater. Res. 58 5 (2001) 593-598
12. Mak M.B.A., Jin Z., and Fisher J. Effect of microseparation on contact mechanics in ceramic-on-ceramic hip joint replacements. Proc. Instn. Mech. Engrs. 216 (2002) 403-408
13. Mittelmeier H., and Heisel J. Sixteen-years' experience with ceramic hip prostheses. Clin. Orthop. Relat. Res. 282 (1992) 64-72
14. Murphy, S., Ecker Timo, Tannast, Moritz, 2007. The occurrence of the squeaking phenomenon in total hip arthroplasty using alumina ceramic-on-ceramic bearings. In: Proceedings of the ISTA, Paris.
15. Nevelos J., Ingham C., Doyle R., Streicher A., Nevelos W., Walter B., and Fisher J. Micro-separation of the centers of alumina-alumina artificial hip joints during simulator testing produces clinically relevant wear rates and patterns. J. Arthroplasty 15 6 (2000) 793-795
16. Rieker C., Konrad R., and Schon R. In vitro comparison of the two hard-hard articulations for total hip replacement. Proc. Instn. Mech. Engrs. H125 (2001) 153-160
17. Saikko V. Friction measurement in the biaxial rocking motion hip joint simulator. J. Tribol. 131 1 (2009) 011201
18. Saikko V., and Calonius O. Slide track analysis of the relative motion between femoral head and acetabular cup in walking and hip simulator. J. Biomech. 35 4 (2002) 455-464
19. Sariali, E., Stewart, T., Jin, Z., Fisher, J., 2009. In vitro analysis of friction coefficient under edge loading conditions in ceramic-on-ceramic total hip prostheses. In: Proceedings of the 55th Orthopaedic Research Society Conference, Las Vegas.
20. Sariali, E., Stewart, T., Jin, Z., Fisher, J., 2009. In vitro and in vivo analysis of squeaking frequencies in ceramic-on-ceramic total hip protheses. In: Proceedings of the 55th Orthopaedic Research Society, Las Vegas.
21. Scholes S., Unsworth A., and Goldsmith A.J. A frictional study of total hip joint replacements. Phys. Med. Biol. 45 (2000) 3721-3735
22. Shishido T., Yamamoto K., Tanaka S., Masaoka T., Clarke I.C., and Williams P. A study of a retrieved implant of ceramic-on-ceramic total hip arthroplasty. J. Arthroplasty 21 2 (2006) 294-298
23. Stewart T., Tipper J., Insley G., Streicher R., Ingham E., and Fisher J. Severe wear and fracture of zirconia heads against alumina inserts in hip simulator studies with micro-separation. J. Arthroplasty 18 6 (2003) 726-734
24. Stewart T., Tipper J., Streicher R., Ingham E., and Fisher J. Long term wear of HIPed alumina on alumina bearings for THR under microseparation conditions. J. Mater. Sci. Mater. Med. 12 10-12 (2001) 1053-1056
25. Stewart T., Williams S., Tipper J., Ingham E., Stone M., and Fisher J. Advances in simulator testing of orthopaedic joint prostheses. Tribol. Res. Des. Eng. Syst. 291-296 (2003)
26. Van de Velde F., and De Baets P. A new approach of tick-slip based on quasi harmoic tangential oscillations. Wear 216 (1998) 15-26
27. Van de Velde F., and De Baets P. The relation between friction force and relative speed during the slip-phase of stick-slip cycle. Wear 219 (1998) 220-226
28. Walter W., Insley G., Walter W., and Tuke M. Edge loading in third generation alumina ceramic-on-ceramic bearings. J. Arthroplasty 19 4 (2004) 402-413
29. Walter W., O'Toole G., Walter W., Ellis A., and Zicat B. Squeaking in ceramic-on-ceramic hips. The importance of acetabular component orientation. J. Arthroplasty 22 4 (2007) 496-503
30. Weiss, C., Hothann, A., Hoffman, N., Morlock, M., 2008. Squeaking ceramic-on-ceramic total hip replacements. A numerical vibration approach. In: Proceedings of the 16th Congress of the European Society of Biomechanics, Luzern, Switzerland.
31. Yamamoto T., Masanobu S., Masaru U., Takehito H., Yusuke T., and Kazuo Y. Wear analysis of retrieved ceramic-on-ceramic articulations in total hip arthroplasty: femoral head makes contact with the rim of the socket outside of the bearing surface. J. Biomed. Mater. Res. B Appl. Biomater. 73 2 (2005) 301-307
32. Yau W., Wong J.W., Chiu K.Y., Ng T.P., and Tang W.M. Patellar clunk syndrome after posterior stabilized total knee arthroplasty. J. Arthroplasty 18 8 (2003) 1023-1028
33. Zwickler E. J. Acoust. Soc. Am. 33 2 (1961) 248