Magnetic field assisted abrasive based micro-/nano-finishing

Journal of Materials Processing Technology

Volumn 209, Issue 20, 2009, Pages 6022-6038

  Jain, V K ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

Author keywords

Abrasive Flow Machining; Magnetic Abrasive Finishing; Magnetorheological Abrasive Flow Finishing; Magnetorheological Finishing; Micro nano machining

Indexed keywords

ABRASIVE FLOW MACHINING; MAGNETIC ABRASIVE FINISHING; MAGNETO-RHEOLOGICAL; MAGNETORHEOLOGICAL ABRASIVE FLOW FINISHING; MAGNETORHEOLOGICAL FINISHING; NANOMACHINING;

ABRASIVES; CUTTING TOOLS; ELECTRIC POWER TRANSMISSION NETWORKS; ELECTRIC POWER UTILIZATION; ELECTRON BEAMS; EXCITONS; MACHINING; MAGNETIC FIELDS; MAGNETIC MATERIALS; MAGNETOS; POLISHING; SURFACE PROPERTIES; SURFACE ROUGHNESS;

ABRASIVE CUTTING;

EID: 71749109155     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2009.08.015     Document Type: Article

References (62)

1. Ahn Y., Youn J., Chang-Wook B., and Yong-Kweon K. Chemical mechanical polishing by colloidal silica-based slurry for micro-scratch reduction. Wear 257 (2004) 785-789
2. Carlson J.D., Catanzarite D.M., and Clair K.A. Commercial magnetorheological fluid devices. International Journal of Modern Physics B 10 23/24 (1996) 2857-2865
3. Chang C.Y., Lin H.Y., Lei T.F., Cheng J.Y., Chen L.P., and Dai B.T. Fabrication of thin film transistors by chemical mechanical polished polycrystalline silicon films. IEEE Electron Device Letters 17 (1996) 100-102
4. Fox M., Agrawal K., Shinmura T., and Komanduri R. Magnetic abrasive finishing of rollers. Annals of CIRP 43 1 (1994) 181-184
5. Furst E.M., and Gast A.P. Micromechanics of magnetorheological suspensions. Physical Review E 61 6 (2000) 6732-6739
6. Ginder J.M., and Davis L.C. Shear stresses in magnetorheological fluids: role of magnetic saturation. Applied Physics Letters 65 26 (1994) 3410-3412
7. Gorana V.K., Jain V.K., and Lal G.K. Experimental investigation into cutting forces and active grain density during abrasive flow machining. International Journal of Machine Tools Manufacture 44 (2004) 201-211
8. Gorana V.K., Jain V.K., and Lal G.K. Forces prediction during material deformation in abrasive flow machining. Wear 260 (2006) 128-139
9. Hayashi Y., Nakajima T., and Kunio T. Ultrauniform Chemical Mechanical Polishing (CMP) using a Hydro Chuck, featured by wafer mounting on a quartz glass plate with fully flat water supported surface. Japanese Journal of Applied Physics 35 (2001) 1054-1059
10. Jain V.K. Advanced Machining Processes (2002), Allied Publishers, Delhi
11. Jain V.K. Introduction to Micromachinnig (2009), Narosa Publishers, Delhi
12. Jain R.K., and Jain V.K. Simulation of surface generated in abrasive flow finishing process. Robotics and Computer Integrated Manufacturing 15 (1999) 403-412
13. Jain R.K., Jain V.K., and Dixit P.M. Modeling of material removal and surface roughness in abrasive flow machining process. International Journal of Machine Tools and Manufacture 39 (1999) 1903-1923
14. Jain R.K., Jain V.K., and Kalra P.K. Modeling of abrasive flow machining: a neural network approach. Wear 231 (1999) 242-248
15. Jain R.K., and Jain V.K. Optimum selection of machining conditions in abrasive flow machining using neural networks. Journal of Material Processing Technology 108 (2000) 62-67
16. Jain R.K., and Jain V.K. Stochastic simulations of active grain density in abrasive flow machining. Journal of Material Processing Technology 152 (2004) 17-22
17. Jain V.K., Ranganath C., and Murlidhar K. Evaluation of rheological properties of medium for AFM process. Machining Science and Technology 5 2 (2001) 151-170
18. Jain V.K., Kumar Prashant, Behera P.K., and Jayswal S.C. Effect of working gap and circumferential speed on the performance of abrasive finishing process. Wear 250 (2001) 384-390
19. Jayswal S.C., Jain V.K., and Dixit P.M. Analysis of magnetic abrasive finishing with slotted magnetic pole. AIP Conf. Proc. June 10 (2004) 712, 1435-1440
20. Jayswal S.C., Jain V.K., and Dixit P.M. Magnetic abrasive finishing process-a parametric analysis. Journal of Advanced Manufacturing Technology 4 2 (2005) 131-150
21. Jayswal S.C., Jain V.K., and Dixit P.M. Modeling and simulation of magnetic abrasive finishing. International Journal of Advanced Manufacturing Technology 26 (2005) 477-490
22. Jayswal, S.C., 2005. Modeling and Simulation of Magnetic Abrasive Finishing (MAF) Process. Ph.D. Thesis, Indian institute of technology, Kanpur, India.
23. Jha, S., 2006. Magnetorheological Abrasive Flow Finishing (MRAFF) Process. Ph.D. Thesis, Indian institute of technology, Kanpur, India.
24. Jha S., and Jain V.K. Design and development of magnetorheological abrasive flow finishing process. International Journal of Machine Tools and Manufacture 44 10 (2004) 1019-1029
25. 4) workpieces using magnetorheological abrasive flow finishing. International Journal of Nanomanufacturing 1 1 (2006) 17-25
26. Jha S., and Jain V.K. Parametric analysis of magnetorheological abrasive flow finishing (MRAFF) process. International Journal of Manufacturing Technology and Management 13 2-4 (2008) 308-323
27. Jhansson S., Schweitz J.A., and Lagerlof K.P.D. Surface defects in polished silicon studied by cross-sectional transmission electron microscopy. Journal of the American Ceramic Society 72 (1989) 1136-1139
28. Kim J.D. Development of a magnetic abrasive jet machining system for internal polishing of circular tubes. Journal of Material Processing Technology 71 (1997) 384-393
29. Klingenberg D.J. Magnetorheology: applications and challenges. AIChE Journal 47 2 (2001) 246-249
30. Kohut, T., 1989. Surface finishing with abrasive flow machining. SME technical paper, 35-43.
31. Komanduri R., Lucca D.A., and Tani Y. Technological advances in fine abrasive processes. Annals of CIRP 46 2 (1997) 545-596
32. Komanduri R. On material removal mechanisms in finishing of advanced ceramics and glasses. Annals of CIRP 45 1 (1996) 509-514
33. Kordonski W.I. Magnetorheological finishing. International Journal of Modern Physics B 10 23/24 (1996) 2837-2849
34. Kremen G.Z. Machining time estimation for magnetic abrasive processes. International Journal of Production Research 32 12 (1994) 2817-2825
35. Lambropoulo, S.J., Yang, F., Jacob, S.D., 1996. Optical fabrication and testing, Technical Digest Series. Optical Society of America, Washington, DC, 7, 150-153.
36. Liu Y., Zhang K., Wang F., and Weiguo D. Investigation on the final polishing slurry and technique of silicon substrate in ULSI. Microelectronic Engineering 66 (2003) 438-444
37. Luo J., and Dornfeld D. Material removal mechanism in chemical mechanical polishing: theory and modeling. IEEE Transaction on Semiconductor Manufacturing 14 2 (2001) 114-133
38. Madarkar R., and Jain V.K. Investigations into Magnetic abrasive microdeburring (MAMDe). In: Anil B., Radhakrishnan V., and Sunilkumar K. (Eds). Proceedings of the Conference COPEN (2007), Allied Publishers, New Delhi 307-312
39. Mathur, R., Khare, Roopam, Chauhan, Vinesh, 2003. Magnetorheological Finishing of Optical Lenses, B.Tech. Project. Mechanical Eng. Dept., IIT Kanpur.
40. Mori Y., and Yamauchi K. Elastic emission machining. Precision Engineering 9 (1987) 123-128
41. Mori Y., Ikawa N., Sugiyama K., Okuda T., and Yamauchi K. Elastic emission machining - 2nd report - stress field and feasibility of introduction and activation of lattice defects. Japan Society of Precision Engineers 51 (2002) 1187-1194
42. Nanz G., and Camilletti L.E. Modeling of chemical-mechanical polishing: a review. IEEE Transactions on Semiconductor Manufacturing 8 (1995) 382-389
43. Rabinow J. The magnetic fluid clutch. AIEE Transactions 67 (1948) 1308
44. Rhoades L.J. Abrasive flow machining. Manufacturing Engineering (1988) 75-78
45. Rhoades L.J. Abrasive flow machining: a case study. Journal of Materials Processing Technology 28 (1991) 107-116
46. Rosenweig R.E. Fluid magnetic buoyancy. AIAA Journal 4 10 (1966) 1751
47. Saka N., Eusher T., and Chun J.H. Nano-scale scratching in chemical-mechanical polishing. CIRP Annals-Manufacturing Technology 57 (2008) 341-344
48. Sankar R.M., Mondal S., Ramkumar J., and Jain V.K. Experimental investigations and modeling of drill bit-guided abrasive flow finishing (DBG-AFF) process. International Journal of Advanced Manufacturing Technology 42 (2009) 678-688
49. Sankar R.M., Ramkumar J., and Jain V.K. Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process. Wear (2009) 10.1016/j.wear.2008.08.017
50. Shinmura T. Study on magnetic abrasive finishing-characteristics of finished surface. Journal of Japan Society of Precision Engineering 53 11 (1987) 1791-1793
51. Singh, D.K., 2005. Investigations into Magnetic Abrasive Finishing of Plane Surfaces. Ph.D. Thesis. Indian Institute of Technology, Kanpur, India.
52. Singh D.K., Jain V.K., and Raghuram V. On the performance analysis of flexible magnetic abrasive brush. Machining Science and Technology 9 (2005) 601-619
53. Singh D.K., Jain V.K., Raghuram V., and Komanduri R. Analysis of surface texture generated by a flexible magnetic abrasive brush. Wear 259 (2005) 1254-1261
54. Singh D.K., Jain V.K., and Raghuram V. Experimental investigations into forces acting during magnetic abrasive finishing. International Journal of Advanced Manufacturing Technology 30 (2006) 652-662
55. Tani Y., and Kawata K. Development of high-efficient fine finishing process using magnetic fluid. Annals of CIRP 33 (1984) 217-220
56. Tsuwa H., Ikawa N., Mori Y., and Sugiyama. Numerically controlled elastic emission machining. Annals of CIRP 28 1 (1979) 193-197
57. 4) balls for hybrid bearing applications by magnetic float polishing (MFP). International Journal of Machine Tools and Manufacture 46 (2005) 151-169
58. Venkatesh V.C., Inasaki I., Tonshoff H.K., Nakagawa T., and Mirinescu I.D. Observation on polishing and ultra precision machining of semiconductor substrate materials. Annals of CIRP 44 2 (1995) 611-618
59. Vora H., Orent T.W., and Stokes R.J. Mechano-chemical polishing of silicon nitride. Journal of American Ceramic Society 65 (1982) C140-C141
60. Wenski G., Altmann T., Winkler W., Heier G., and Holker G. Double side polishing-a technology mandatory for 300 mm wafer manufacturing. Materials Science in Semiconductor Processing 5 (2002) 375-380
61. Yamaguchi H., and Shinmura T. Study of the surface modification resulting from an internal magnetic abrasive finishing process. Wear (1999) 225-229, 246-255
62. Yamaguchi H., and Shinmura T. Internal finishing process for alumina ceramic components by a magnetic field assisted finishing process. Precision Engineering 28 (2004) 135-142