Application of X-ray and neutron diffraction to determine lattice parameters and precipitate volume fractions in low misfit nickel base superalloys

Materials Science and Technology

Volumn 25, Issue 11, 2009, Pages 1369-1374

  Tiley, J ^a   Srinivasan, R ^b   Banerjee, R ^c   Viswanathan, G B ^b   Toby, B ^d   Fraser, H L ^b  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b The Ohio State University   (United States)

^c UNIVERSITY OF NORTH TEXAS   (United States)

^d ARGONNE NATIONAL LABORATORY   (United States)

Author keywords

Lattice parameter; Neutron diffraction; Nickel base superalloys; X ray diffraction

Indexed keywords

COEFFICIENT OF THERMAL EXPANSION; HIGH STRENGTH; LATTICE PARAMETER; LATTICE PARAMETERS; MICROSTRUCTURE CHANGES; NEUTRON DIFFRACTION TECHNIQUE; NICKEL BASE SUPERALLOY; PRECIPITATE VOLUME FRACTION; SECONDARY PRECIPITATES; SYNCHROTRON X RAY DIFFRACTION; X-RAY AND NEUTRON DIFFRACTION;

LATTICE CONSTANTS; NEUTRON DIFFRACTION; NEUTRONS; NICKEL; NICKEL ALLOYS; PRECIPITATES; THERMAL EXPANSION; TITRATION; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

SUPERALLOYS;

EID: 70749138485     PISSN: 02670836     EISSN: 17432847     Source Type: Journal    
DOI: 10.1179/174328409X399010     Document Type: Article

References (36)

1. R. C. Reed: in 'The superalloys, fundamentals and applications', 236-257; 2006, Cambridge, Cambridge University Press.
2. J. Telesman, P. Kantzos, J. Gayda, P. J. Bonacuse and A. Prescenzi: in 'Superalloys 2004', (ed. K. A. Green, K. A. et al.), 215-224; 2004, Warrendale, PA, TMS Publications.
3. T. Gabb and J. Gayda: 'Phase stability of a powder metallurgy disk superalloy', Technical Presentation, NASA Glenn Research Centre, October 2006.
4. S. K. Sondhi, B. F. Dyson and M. McLean: Acta Mater., 2004, 52, 1761-1772.
5. M. Fahrmann,W. Hermann, E. Fahrmann, A. Boegli, T.M. Pollock and H. G. Sockel: Mater. Sci. Eng. A, 1999, A271, 122-127.
6. Y. N. Gornostyrev, O. Y. Kontsevoi, K. Y. Khromov, M. I. Katsnelson and A. J. Freeman: Scr. Mater., 2007, 56, 81-84.
7. J. Tiley, G. B. Viswanathan, R. Srinivasan, R. Banerjee, D. M. Dimiduk and H. L. Fraser: Acta Mater., under review (2009).
8. S. T. Wlodeck, M. Kelly and D. A. Alden: in 'Superalloys 1996', (ed. R. D. Kissinger, et al.), 129; 1996, Warrendale, PA, TMS Publications.
9. M. Karadge, M. Preuss, P. J. Withers and S. Bray: Mater. Sci. Technol. A, 2008, A491, 446-453.
10. G. B. Viswanathan, P. M. Sarosi, M. F. Henry, D. D. Whitis, W. W. Milligan and M. J. Mills: Acta Mater., 2005, 53, 3041-3057.
11. P. M. Sarosi, G. B. Viswanathan, D. D. Whitis and M. J. Mills: Ultramicroscopy, 2005, 103, 83-93.
12. R. Gilles, D. Mukherji, D. M. Többens, P. Strunz, B. Barbier, J. Rö sler and H. Fuess: Appl. Phys. A, 2002, 74A, (Suppl.), S1446-S1448.
13. P. Paczkowski: Mater. Chem. Phys., 2003, 81, 233-236.
14. H. C. Pinto and G. Bruno: J. Synchrotron Radiat., 2003, 10, 148-153.
15. M. Hoelzel, D. Del Genovese, R. Gilles, D. Mukherji, D. Toebbens and J. Roesler: Physica B, 2006, 385-386B, 594-596.
16. G. Bruno and H. C. Pinto: Mater. Sci.Technol., 2003, 19, 567.
17. G. Bruno, G. Schumacher, H. C. Pinto and C. Schulze: Metall. Mater. Trans.s A, 2003, 34A, 193-197.
18. G. Bruno, H. C. Pinto and W. Reimers: Appl. Phys. A, 2002, 74A, (Suppl.), S940-S942.
19. A. J. Heron and G. B. Schaffer: Mater. Sci. Eng., 2003, A352, 105-111.
20. A. Royer, P. Bastie and M. Vernon: Acta Mater., 1998, 46, (15), 5357-5368, (1998).
21. M. Pruess, P. J. Withers and G. J. Baxter: Mater. Sci. Eng. A, 2006, A437, 38-45.
22. A. Royer, P. Bastie and M. Vernon: Scr. Mater., 1997, 37, (8), 1199-1205.
23. Defense Advanced Research Projects Agency (DARPA), Defense Systems Office (Engine Systems Prognosis, Contract numbers HR0011-04-C-0001 and HR0011-04-C-0002).
24. J. W. Littles and M. B. Buczek: in 'Mater. damage prognosis', (ed. L. Christodoulou and J. M. Larsen), 23-29; 2005, Warrendale, PA, TMS Publications.
25. J. Y. Hwang, R. Banerjee, J. Tiley, R. Srinivasan, G. B. Viswanathan and H. L. Fraser: Mater. Trans. A, 2008, 40, 24-35.
26. 'Residual stress measurement by X-ray diffraction'; 2003, Warrendale, PA, SAE International.
27. J. D. Jorgensen, J. Faber Jnr, J. M. Carpenter, R. K. Crawford, J. R. Haumann, R. L. Hitterman, R. Kleb, G. E. Ostrowski, F. J. Rotella and T. G. Worlton: J. Appl. Cryst., 1989, 22, 321-333.
28. J. Wang, B. H. Toby, P. L. Lee, L. Ribaud, S. M. Antao, C. Kurtz, M. Ramanathan, R. B. Von Dreele and M. A. Beno: Rev. Sci. Instrum., 2008, 78, 85105-1-7.
29. P. L. Lee, D. Shu, M. Ramanathan, C. Preissner, J. Wang, M. A. Beno, R. B. Von Dreele, L. Ribaud, C. Kurtz, S. M. Antao, X. Jiao and B. H. Toby: J. Synchrotron Radiat., 2008, 15, 427-432.
30. Standard Reference Material 640c, National Institute of Standards and Technology, 2000.
31. A. C. Larson and R. B. von Dreele: 'General structure analysis system (GSAS)', Report LAUR 86-748, Los Alamos National Laboratory, Los Alamos, NM, USA, 2000.
32. B. H. Toby: J. Appl. Cryst., 2001, 34, 210-213.
33. PeakFit, Version 4, Systat Software Incorporated, San Jose, CA, USA, 2002.
34. P. K. Sung and D. R. Poirier: Mater. Sci. Eng. A, 1998, A245, 135-141.
35. S. K. Sondhi, B. F. Dyson and M. Mclean: Acta Mater., 2004, 52, 1761-1772.
36. M. G. Fahrmann, A. A. Wereszczak and T. P. Kirkland: Mater. Eng. A, 1999, A271, 122-127.