The fracture toughness and toughening mechanism of commercially available unalloyed molybdenum and oxide dispersion strengthened molybdenum with an equiaxed, large grain structure

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 40, Issue 12, 2009, Pages 2843-2860

  Cockeram, B V ^a  

^a BETTIS ATOMIC POWER LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DUCTILE-TO-BRITTLE TRANSITION TEMPERATURE; EQUIAXED GRAINS; FRACTURE TOUGHNESS TESTING; FRACTURE TOUGHNESS VALUES; GRAIN SHAPES; GRAIN SIZE; LARGE-GRAIN; OXIDE DISPERSION STRENGTHENED; OXIDE PARTICLES; OXYGEN CONTENT; TOUGHENING MECHANISMS; TRANSITION TEMPERATURE; WROUGHT PRODUCTS;

CRACKS; DISPERSIONS; FRACTURE; FRACTURE TESTING; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; METALLURGY; MOLYBDENUM; MOLYBDENUM ALLOYS; MOLYBDENUM POWDER METALLURGY; OXYGEN; SUPERCONDUCTING TRANSITION TEMPERATURE; SUPERCONDUCTING WIRE; TENSILE STRENGTH; TENSILE TESTING; TEXTURES;

FRACTURE TOUGHNESS;

EID: 70449528394     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-009-9919-9     Document Type: Conference Paper

References (58)

1. J.B. Lambert and J.J. Rausch: Materials Handbook, vol. 2, Non-Ferrous Alloys and Special-Purpose Materials, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 557-82.
2. J. Wadsworth 2007 JOM 59 2 41 47 10.1007/s11837-007-0021-8 2319163 (Pubitemid 46351222)
3. R.E. Gold D.L. Harrod 1979 J. Nucl. Mater. 85-86 805 15 10.1016/0022-3115(79)90359-3 (Pubitemid 10463374)
4. B.L. Cox F.W. Wiffen 1979 J. Nucl. Mater. 85-86 901 05 10.1016/0022-3115(79)90375-1 (Pubitemid 10463390)
5. J. Wadsworth T.G. Nieh J.J. Stephens 1988 Int. Mater. Rev. 33 3 131 50
6. B.A. Wilcox and A. Gibert: in Refractory Metals and Alloys IV-Research and Development, K.I Jaffee, G.M. Ault, J. Maltz, and M. Semchyshen, eds., Gordon and Breach, New York, NY, 1967, pp. 95-115.
7. A. Lawley: in Refractory Metals and Alloys IV- Research and Development, K.I Jaffee, G.M. Ault, J. Maltz, and M. Semchyshen, eds., Gordon and Breach, New York, NY, 1967, pp. 141-60.
8. B.S. Lemet and K. Kreder: in Refractory Metals and Alloys IV-Research and Development, K.I Jaffee, G.M. Ault, J. Maltz, and M. Semchyshen, eds., Gordon and Breach, New York, NY, 1967, pp. 161-83.
9. H. Kurishita A. Oishi H. Kubo H. Yoshinaga 1985 Trans. J. Inst. Met. 26 5 341 52
10. H. Kurishita H. Yoshinaga 1989 Mater. Forum 13 161 73
11. S. Tsurelawa T. Tanaka H. Yoshinaga 1994 Mater. Sci. Eng. A176 341 48
12. A. Kumar B.L. Eyre 1980 Proc. R. Soc. London A370 431 58 1980RSPSA.370..431K
13. B.V. Cockeram 2002 Metall. Mater. Trans. A 33A 3685 3707 10.1007/s11661-002-0242-y
14. B.V. Cockeram 2005 Metall. Mater. Trans. A 36A 1777 91 10.1007/s11661-005-0042-2
15. B.V. Cockeram 2006 Mater. Sci. Eng., A 418 120 36 10.1016/j.msea.2005.11. 030 (Pubitemid 43216110)
16. B.V. Cockeram K.S. Chan 2008 Metall. Mater. Trans. A 39A 2045 67 10.1007/s11661-008-9561-y 2008MMTA...39.2045C
17. M. Semchyshen R.Q. Barr 1966 J. Less Common Met. 11 1 13 10.1016/0022-5088(66)90052-X
18. C. Grandhi M.F. Ashby 1979 Acta Metall. 27 1565 1602 10.1016/0001- 6160(79)90042-7 (Pubitemid 10408362)
19. J.C. Thornley A.S. Wronski 1970 Acta Metall. 18 1053 62 10.1016/0001-6160(70)90002-7
20. A.A. Johnson S.P. Gupta S.P. Kodali 1975 Mater. Sci. Eng. 18 159 61 10.1016/0025-5416(75)90083-X
21. S. Morozumi: Proc. Mechanical Properties of Bcc Metals, TMS-AIME, Warrendale, PA, 1982, pp. 197-205.
22. A. Lawley, J. Van den Sype, and R. Maddin: J. Inst. Met., 1962-1963, vol. 91, pp. 23-27.
23. G.W. Brock 1961 Trans. AIME 221 1055 62
24. W.D. Klopp 1975 J. Less Common Met. 42 261 78 10.1016/0022-5088(75)90046- 6
25. J. Wadsworth T.G. Nieh J.J. Stephens 1986 Scripta Metall. 20 637 42 10.1016/0036-9748(86)90481-3 (Pubitemid 16570062)
26. M. Scibetta R. Chaouadi J.L. Puzzolante 2000 J. Nucl. Mater. 283-287 455 60 10.1016/S0022-3115(00)00266-X (Pubitemid 32028870)
27. J.A. Shields, P. Lipetzky, and A.J. Mueller: Proc. 15th Int. Plansee Seminar, G. Kneringer, P. Rodhammer, and H. Wildner, eds., Plansee Holding AG, Reutte, Austria, 2001, vol. 4, pp. 187-99.
28. J.J. Kruzic J.H. Schneibel R.O. Ritchie 2005 Metall. Mater. Trans. A 36A 2393 2402 10.1007/s11661-005-0112-5 2005MMTA...36.2393K
29. G. Zhang Y. Sun C. Zuo J. Wei J. Sun 2008 Mater. Sci. Eng., A 483-484 350 52
30. L. Wang Y. Sun J. Luo Y. Zhu P. Niu 2007 Mater. Sci. Forum 534-536 1265 68 10.4028/www.scientific.net/MSF.534-536.1265
31. D. Sturm M. Heilmaier J.H. Schneibel P. Jehanno B. Skrotzki H. Saage 2007 Mater. Sci. Eng., A 463 107 14 10.1016/j.msea.2006.07.153 (Pubitemid 46778179)
32. I.M. Gunter J.H. Schneibel J.J. Kruzic 2007 Mater. Sci. Eng., A 458 275 80 10.1016/j.msea.2006.12.128 (Pubitemid 46555048)
33. D.L. Chen B. Weiss R. Stickler M. Witwer G. Leichtfried H. Hödl 1994 High Temp. Mater. Processes 13 75 85
34. D.L. Chen, B. Weiss, R. Stickler, M. Witwer, and G. Leichtfried: Proc. 13th Int. Plansee Seminar, H. Bildstein and R. Eck, eds., Metallwerk Plansee, Reutte, Austria, 1993, vol. 1, pp. 621-31.
35. A.Yu. Koval A.D. Vasilev S.A. Firstov 1997 Int. J. Refract. Met. Hard Mater. 15 223 26 10.1016/S0263-4368(97)00009-7
36. M. Danylenko: Modeling the Mechanical Response of Structural Materials, E.M. Taleff and R.K. Mahidhara, eds., TMS, Warrendale, PA, 1997, pp. 229-35.
37. M. Rödig, H. Derz, G. Pott, and B. Werner: Proc. 14th Int. Plansee Seminar, G. Kneringer, P. Rödhammer, and P. Wilharitz, eds., Metallwerk Plansee, Reutte, Austria, 1997, vol. 1, pp. 781-91.
38. C.W. Marschall and F.C. Holden: High Temperature Refractory Metals, Gordon-Breach Science Publishers, New York, NY, 1964, pp. 129-59.
39. H.E. Romine: Fracture Toughness at Room Temperature of Some Refractory Metals Based on Tungsten, Molybdenum or Columbium Which Are Being Considered for Use in the Nozzles of Large Solid Propellant Rockets, NWL Report No. 1873, U.S. Naval Weapons Laboratory, Dahlgren, VA, 1963.
40. K.S. Chan 1989 Metall. Trans. A 20A 155 64 1989MTA....20..155C
41. K.S. Chan 1989 Metall. Trans. A 20A 2337 44 1989MTA....20.2337C
42. K.T. Venkateswara Rao W. Yu R.O. Ritchie 1988 Metall. Trans. A. 19A 549 61 1988MTA....19..549V
43. J.D. Embury N.J. Petch A.E. Wraith E.S. Wright 1967 Trans. AIME 239 114 18
44. S. Yokoshima M. Yamaguchi 1996 Acta Metall. 44 3 873 83
45. R.R. Adharapurapu K.S. Vecchio A. Rohatgi F. Jiang 2005 Metall. Mater. Trans. A 36A 3217 36 10.1007/s11661-005-0092-5
46. R. Bianco, R.W. Buckman, Jr., and C.B. Geller: High Strength, Creep-Resistant Molybdenum Alloy and Process for Producing the Same, U.S. Patent No. 5,868,876, Feb. 9, 1999.
47. A.J. Mueller, J.A. Shields, and R.W. Buckman, Jr.: Proc. 15th Int. Plansee Seminar, G. Kneringer, P. Rodhammer, and H. Wildner, eds., Plansee Holding AG, Reutte, Austria, 2001, vol. 1, pp. 485-97.
48. "ASTM E399-90 Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials," Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 1997.
49. "ASTM E1820-01 Standard Test Method for Measurement of Fracture Toughness," Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2001.
50. "ASTM E8-00 Standard Test Method for Tension Testing of Metallic Materials," Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2001.
51. "ASTM E21-98 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials," Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 1998.
52. W.C. Coons: The Metal Molybdenum, ASM INTERNATIONAL, Materials Park, OH, 1958, p. 394.
53. S. Suresh J.R. Brockenbrough 1988 Acta Metall. 36 1455 70 10.1016/0001-6160(88)90213-1 (Pubitemid 18633497)
54. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 2nd ed., John Wiley & Sons, New York, NY, 1983, pp. 269-348.
55. Z. Jiuxing L. Lu Z. Meiling H. Yancao Z. Tieyong 1999 Int. J. Refract. Met. Hard Mater. 17 405 09 10.1016/S0263-4368(99)00030-X (Pubitemid 30586379)
56. A. Saxena, D.C. Daly, H.A. Ernst, and K. Banerji: Fracture Mechanics: 21st Symp., ASTM STP 1074, J.P. Gudas, J.A. Joyce, and E.M. Hackett, eds., ASTM, West Conshohocken, PA, 1990, pp. 378-95.
57. J.W. Hutchinson 1968 J. Mech. Phys. Solids 16 13 31 0166.20704 10.1016/0022-5096(68)90014-8 1968JMPSo..16...13H
58. J.R. Rice G.F. Rosengren 1968 J. Mech. Phys. Solids 16 1 12 0166.20703 10.1016/0022-5096(68)90013-6 1968JMPSo..16....1R