The fracture toughness and toughening mechanisms of wrought low carbon arc cast, oxide dispersion strengthened, and molybdenum-0.5 pct titanium-0.1 pct zirconium molybdenum plate stock

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 7, 2005, Pages 1777-1791

  Cockeram, B V ^a  

^a BETTIS ATOMIC POWER LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON; DATA REDUCTION; FRACTURE TOUGHNESS; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; HYDROCHLORIC ACID; MASS SPECTROMETRY; REFRACTORY METALS;

CRACKLIKE DEFECTS; CREEP RESISTANCE; LOW CARBON ARC CAST (LCAC); OXIDE DISPERSION STRENGTHENED (ODS);

MOLYBDENUM ALLOYS;

EID: 23644431869     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0042-2     Document Type: Conference Paper

References (38)

1. J.B. Lambert and J.J. Rausch: Metals Handbook, vol. 2, Non-Ferrous Alloys and Special-Purpose Materials, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 557-82.
2. R.E. Gold and D.L. Harrod: J. Nucl. Mater., 1979, vols. 85-86, pp. 805-15.
3. B.L. Cox and F.W. Wiffen: J. Nucl. Mater., 1979, vols. 85-86, pp. 901-05.
4. K. Furuya and J. Moteff: J. Nucl. Mater., 1981, vol. 99, pp. 306-16.
5. M. Scibetta, R. Chaouadi, and J.L. Puzzolante: J. Nucl. Mater., 2000, vols. 283-287, pp. 455-60.
6. G.R. Smolik, D.A. Petti, and S.T. Schuetz: J. Nucl. Mater., 2000, vols. 283-287, pp. 1458-62.
7. B.V. Cockeram: Metall Mater. Trans. A., 2002, vol. 33A, pp. 3685-3707.
8. J.A. Shields, P. Lipetzky, and A.J. Mueller: Proc. 15th Int. Plansee Seminar, G. Kneringer, P. Rodhammer, and H. Wildner, eds., Plansee Holding AG, Reutte, Austria, 2001, vol. 4, pp. 187-99.
9. ASTM B386-91, ASTM, Philadelphia, PA, 1997.
10. R. Bianco, R.W. Buckman, Jr., and C.B. Geller: U.S. Patent 5,868,876, Feb. 9, 1999.
11. A.J. Mueller, J.A. Shields, and R.W. Buckman, Jr.: Proc. 15th Int. Plansee Seminar, G. Kneringer, P. Rodhammer, and H. Wildner, eds., Plansee Holding AG, Reutte, Austria, 2001, vol. 1, pp. 485-97.
12. R. Bianco and R.W. Buckman, Jr.: 1995 Spring ASM/TMS Symp. on High Temperature Materials, May 19, 1995, GE CR&D Center, Schenectady, NY (available as WAPD-T-3073, DOE/OSTI, Oak Ridge, TN, 1995).
13. R. Bianco and R.W. Buckman, Jr.: in Molybdenum and Molybdenum Alloys, A. Crowson, E.S. Chen, J.A. Shields, and P.R. Subramanian, eds., TMS, Warrendale, PA, 1998, pp. 125-42.
14. A. Yu, Koval, A.D. Vasilev, and S.A. Firstov: Int. J. Refractory Met. Hard Mater., 1997, vol. 15, pp. 223-26.
15. M. Danylenko: in Modeling the Mechanical Response of Structural Materials, E.M. Taleff and R.K. Mahidhara, eds., TMS, Warrendale, PA, 1997, pp. 229-35.
16. M. Rödig, H. Derz, G. Pott, and B. Werner: Proc. 14th Int. Plansee Seminar, G. Kneringer, P. Rödhammer, and P. Wilharitz, eds., Metallwerk Plansee, Reutte, Austria, 1997, vol. 1, pp. 781-91.
17. D.L. Chen, B. Weiss, R. Stickler, M. Witwer, G. Leichtfried, and H. Hödl: High Temp. Mater. Processes, 1994, vol. 13, pp. 75-85.
18. D.L. Chen, B. Weiss, R. Stickler, M. Witwer, and G. Leichtfried: Proc. 13th Int. Plansee Seminar, H. Bildstein and R. Eck, eds., Metallwerk Plansee, Reutte, Austria, 1993, vol. 1, pp. 621-31.
19. M. Semchyshen and R.Q. Barr: J. Less-Common Met., 1966, vol. 11, pp. 1-13.
20. C.W. Marschall and F.C. Holden: High Temperature Refractory Metals, Gordon-Breach Science Publishers, New York, NY, 1964, pp. 129-59.
21. H.E. Romine: NWL Report No. 1873, U.S. Naval Weapons Laboratory, Dahlgren, VA, 1963.
22. ASTM E1823-96, ASTM, Philadelphia, PA, 1996.
23. ASTM E1820-01, ASTM, Philadelphia, PA, 2001.
24. ASTM E399-90, ASTM, Philadelphia, PA, 1997.
25. B.V. Cockeram: Surf. Coatings Technol., 1998, vols. 108-109, pp. 377-84.
26. B.V. Cockeram: Metal. Mater. Trans. A, 2002, vol. 33A, pp. 33-56.
27. A. Lawley, J. Van den Sype, and R. Maddin: J. Inst. Met., 1962-1963, vol. 91, pp. 23-27.
28. G.W. Brock: Trans. TMS-AIME, 1961, vol. 221, pp. 1055-62.
29. W.D. Klopp: J. Less Common Met., 1975, vol. 42 pp. 261-78.
30. J. Wadsworth, T.G. Nieh, and J.J. Stephens: Scripta Metall., 1986, vol. 20, pp. 637-42.
31. J. Wadsworth, C.M. Packer, P.M. Chewey, and W.C. Coons: Metal. Mater. Trans. A, 1984, vol. 15A, pp. 1741-52.
32. S. Suresh and J.R. Brockenbrough: Acta Metall., 1988, vol. 36, pp. 1455-70.
33. R. W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 2nd ed., John Wiley & Sons, New York, NY, 1983, pp. 269-348.
34. A. Kumar and B.L. Eyre: Proc. R. Soc. London, 1980, vol. A370, pp. 431-58.
35. H. Kurishita and H. Yoshinaga: Mater. Forum, 1989, vol. 13, pp. 161-73.
36. J.B. Brosse, R. Fillit, and M. Biscondi: Scripta Metall., 1981, vol. 15, pp. 619-23.
37. K.S. Chan: Metal Trans. A, 1989, vol. 20A, pp. 155-64.
38. K.S. Chan: Metal. Trans. A, 1989, vol. 20A, pp. 2337-44.