In-situ fracture studies and modeling of the toughening mechanism present in wrought low-carbon arc-cast molybdenum, titanium-zirconium-molybdenum, and oxide-dispersion-strengthened molybdenum flat products

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 39, Issue 9, 2008, Pages 2045-2067

  Cockeram, B V ^a   Chan, K S ^b  

^a BETTIS ATOMIC POWER LABORATORY   (United States)

^b SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR CUSHION VEHICLES; ALLOYS; CAVITY RESONATORS; CONCRETE BEAMS AND GIRDERS; CRACK TIPS; CRYSTAL GROWTH; CRYSTALLOGRAPHY; DELAMINATION; DISPERSION (WAVES); DUCTILITY; ELECTRIC LINES; FRACTURE; FRACTURE FIXATION; FRACTURE TOUGHNESS; GRAIN (AGRICULTURAL PRODUCT); GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; LIGAMENTS; LOW TEMPERATURE TESTING; MECHANISMS; METALLIC COMPOUNDS; MICROSTRUCTURE; MILITARY EQUIPMENT; MOLECULAR BEAM EPITAXY; MOLYBDENUM; MOLYBDENUM METALLOGRAPHY; STEEL SHEET; STRESSES; THERMOLUMINESCENCE; TITANIUM; TITANIUM ALLOYS; TITANIUM OXIDES; ZIRCONIA; ZIRCONIUM;

AND MODELING; CARBON ARCS; DELAMINATION ZONE; DUCTILE-TO-BRITTLE-TRANSITION-TEMPERATURE; FINE-GRAINED MICROSTRUCTURES; FLAT PRODUCTS; FRACTURE STUDIES; IN-SITU; IN-SITU TESTING; MECHANICAL CONSTRAINTS; OXIDE-DISPERSION STRENGTHENED; PLASTIC ZONES; STRESS-INTENSITY FACTORS; TOUGHENING MECHANISMS; TOUGHNESS VALUES;

MOLYBDENUM ALLOYS;

EID: 50149096791     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-008-9561-y     Document Type: Article

References (47)

1. J.B. Lambert, J.J. Rausch: Non-Ferrous Alloys and Special-Purpose Materials, Materials Handbook, Vol. 2, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 557-82
2. R.E. Gold, D.L. Harrod: J. Nucl. Mater., 1979, vol. 85, pp. 805-15
3. B.L. Cox, F.W. Wiffen: J. Nucl. Mater., 1979, vol. 85, pp. 901-05
4. G.R. Smolik, D.A. Petti, and S.T. Schuetz: J. Nucl. Mater., 2000, vols. 283-287, pp. 1458-62
5. J. Wadsworth, T.G. Nieh, J.J. Stephens: Int. Mater. Rev., 1988, vol. 33 (3), pp. 131-50
6. R.N. Orava: In Refractory Metals and Alloys IV-Research and Development, K.I. Jaffee, G.M. Ault, J. Maltz, M. Semchyshen, eds., Gordon and Breach, New York, NY, 1967, pp. 117-40
7. B.A. Wilcox, A. Gibert: In Refractory Metals and Alloys IV-Research and Development, K.I. Jaffee, G.M. Ault, J. Maltz, M. Semchyshen, eds., Gordon and Breach, New York, NY, 1967, pp. 95-115
8. A. Lawley: In Refractory Metals and Alloys IV- Research and Development, K.I. Jaffee, G.M. Ault, J. Maltz, M. Semchyshen, eds., Gordon and Breach, New York, NY, 1967, pp. 141-60
9. B.S. Lemet, K. Kreder: In Refractory Metals and Alloys IV-Research and Development, K.I. Jaffee, G.M. Ault, J. Maltz, M. Semchyshen, eds., Gordon and Breach, New York, NY, 1967, pp. 161-83
10. H. Kurishta, A. Oishi, H. Kubo, H. Yoshinaga: Trans. J. Inst. Met., 1985, vol. 26 (5), pp. 341-52
11. H. Kurishita, H. Yoshinaga: Mater. Forum, 1989, vol. 13, pp. 161-73
12. S. Tsurelawa, T. Tanaka, H. Yoshinaga: Mater. Sci. Eng., 1994, vol. A176, pp. 341-48
13. A. Kumar, B.L. Eyre: Proc. R. Soc. London, 1980, vol. A370, pp. 431-58
14. B.V. Cockeram: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3685-3707
15. B.V. Cockeram: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1777-91
16. B.V. Cockeram: Mater. Sci. Eng A, 2006, vol. 418, pp. 120-36
17. C. Grandhi, M.F. Ashby: Acta Metall., 1979, vol. 27, pp. 1565-1602
18. M. Semchyshen, R.Q. Barr: J. Less-Common Met., 1966, vol. 11, pp. 1-13
19. J.C. Thornley, A.S. Wronski: Acta Metall., 1970, vol. 18, pp. 1053-62
20. A.A. Johnson, S.P. Gupta, S.P. Kodali: Mater. Sci. Eng, 1975, vol. 18, pp. 159-61
21. S. Morozumi: Proc. Mechanical Properties of Bcc Metals, TMS-AIME, Warrendale, PA, 1982, pp. 197-205
22. A. Lawley, J. Van den Sype, and R. Maddin: J. Inst. Met., 1962-1963, vol. 91, pp. 23-27
23. G.W. Brock: Trans. TMS-AIME, 1961, vol. 221, pp. 1055-62
24. W.D. Klopp: J. Less Common Met., 1975, vol. 42, pp. 261-78
25. J. Wadsworth, T.G. Nieh, J.J. Stephens: Scripta Metall., 1986, vol. 20, pp. 637-42
26. K.S. Chan: Metall. Trans. A, 1989, vol. 20A, pp. 155-64
27. K.S. Chan: Metall. Trans. A, 1989, vol. 20A, pp. 2337-44
28. K.T. Venkateswara Rao, W. Yu, R.O. Ritchie: Metall. Trans. A., 1988, vol. 19A, pp. 549-61
29. J.D. Embury, N.J. Petch, A.E. Wraith, and E.S. Wright: Trans. AIME, 1967, vol. 239, pp. 114-18
30. S. Yokoshima, M. Yamaguchi: Acta Metall., 1996, vol. 44 (3), pp. 873-83
31. R.R. Adharapurapu, K.S. Vecchio, A. Rohatgi, F. Jiang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3217-36
32. Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil, ASTM B386-91, ASTM, Philadelphia, PA, 1997
33. R. Bianco, R.W. Buckman, Jr., and C.B. Geller: High Strength, Creep-Resistant Molybdenum Alloy and Process For Producing the Same, U.S. Patent No. 5,868,876, Feb. 9, 1999.
34. A.J. Mueller, J.A. Shields, and R.W. Buckman Jr.: Proc. 15th Int. Plansee Sem., Vol. 1, G. Kneringer, P. Rodhammer, H. Wildner, eds., Plansee Holding AG, Reutte, Austria, 2001, pp. 485-97
35. K S. Chan: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2518-31
36. Standard Terminology Relating to Fatigue and Fracture Testing, ASTM E1823-96, ASTM, Philadelphia, PA, 1996
37. ASTM E812-97, ASTM, Philadelphia, PA, 1997
38. ASTM E813-95, ASTM, Philadelphia, PA, 1995
39. T.G.F. Gray: Int. J. Fract., 1977, vol. 13 (1), pp. 65-75
40. A. Nagy, J.B. Campbell, D.L. Davidson: Rev. Sci. Instrum., 1984, vol. 55, pp. 778-82
41. Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, ASTM E399-90, ASTM, Philadelphia, PA, 1997
42. D.R. Williams, D.L. Davidson, J. Lankford: Exp. Mech., 1980, vol. 20, pp. 134-39
43. E.A. Franke, D.J. Wenzel, D.L. Davidson: Rev. Sci. Instrum., 1990, vol. 62 (5), pp. 1270-79
44. Standard Test Method for Measurement of Fracture Toughness, ASTM E1820-01, ASTM, Philadelphia, PA, 2001
45. X.Q. Feng, D. Gross: Int. J. Damage Mech., 2000, vol. 9, pp. 79-112
46. M.-Y. He, J.W. Hutchinson: Int. J. Solids Struct., 1989, vol. 25 (9), pp. 1053-67
47. Z. Jiuxing, L. Lu, Z. Meiling, H. Yancao, Z. Tieyong: Int. J. Refract. Met. Hard Mater., 1999, vol. 17, pp. 405-09