Superlubricious surface mimicking articular cartilage by grafting poly(2-methacryloyloxyethyl phosphorylcholine) on orthopaedic metal bearings

Journal of Biomedical Materials Research - Part A

Volumn 91, Issue 3, 2009, Pages 730-741

  Kyomoto, Masayuki ^a,b,c   Moro, Toru ^c   Iwasaki, Yasuhiko ^d   Miyaji, Fumiaki ^a   Kawaguchi, Hiroshi ^c   Takatori, Yoshio ^c   Nakamura, Kozo ^c   Ishihara, Kazuhiko ^b  

^a Japan Medical Materials Corporation   (Japan)

^b UNIVERSITY OF TOKYO   (Japan)

^c UNIVERSITY OF TOKYO   (Japan)

^d KANSAI UNIVERSITY   (Japan)

Author keywords

Hydrophilicity; Joint replacement; Metal surface treatment; Phosphorylcholine; Photopolymerization

Indexed keywords

2-METHACRYLOYLOXYETHYL PHOSPHORYLCHOLINE; 3-METHACRYLOXYPROPYL TRIMETHOXYSILANE; ARTICULAR CARTILAGES; ARTIFICIAL HIP JOINT; ASEPTIC LOOSENING; BEARING MATERIALS; BEARING SURFACES; COBALT CHROMIUM MOLYBDENUMS; COCRMO ALLOY; CROSSLINKED; FEMORAL HEADS; FREE END; HEMIARTHROPLASTY; HIGH DENSITY; HIGH MOBILITY; INTERMEDIATE LAYERS; JOINT REPLACEMENT; LOW FRICTION COEFFICIENTS; METAL BEARINGS; METAL SURFACE TREATMENT; MO SUBSTRATES; OSTEOLYSIS; PHOSPHORYLCHOLINE; PHOTO-IRRADIATION TIME; PHOTOINDUCED GRAFT POLYMERIZATION; TOTAL HIP ARTHROPLASTY; WEAR PARTICLES;

CARTILAGE; CHROMIUM; COBALT; FRICTION; GRAFTING (CHEMICAL); HIGH PERFORMANCE LIQUID CHROMATOGRAPHY; HIP PROSTHESES; HYDROPHILICITY; JOINTS (ANATOMY); LIGAMENTS; METALS; MODEL PREDICTIVE CONTROL; MOLYBDENUM; PHOTOPOLYMERIZATION; POLYMERS; PREDICTIVE CONTROL SYSTEMS; SURFACE TREATMENT;

MOLYBDENUM ALLOYS;

2 METHACRYLOYLOXYETHYLPHOSPHORYLCHOLINE; 3 METHACRYLOXYPROPYLTRIMETHOXYSILANE; CHROMIUM; COBALT; MOLYBDENUM; POLYMER; UNCLASSIFIED DRUG;

ANIMAL TISSUE; ARTICLE; ARTICULAR CARTILAGE; BIOCOMPATIBILITY; CHEMICAL STRUCTURE; CONTACT ANGLE; CONTROLLED STUDY; COVALENT BOND; CROSS LINKING; HYDROPHOBICITY; NONHUMAN; ORTHOPEDIC EQUIPMENT; POLYMERIZATION; X RAY PHOTOELECTRON SPECTROSCOPY;

ALLOYS; ANIMALS; ANKLE JOINT; BIOCOMPATIBLE MATERIALS; CARTILAGE, ARTICULAR; JOINTS; LIGHT; MATERIALS TESTING; METALS; METHACRYLATES; PHOSPHORYLCHOLINE; PHOTOCHEMISTRY; POLYMERS; SURFACE PROPERTIES; SWINE;

EID: 70350303346     PISSN: 15493296     EISSN: 15524965     Source Type: Journal    
DOI: 10.1002/jbm.a.32280     Document Type: Article

References (65)

1. Kurtz S, Mowat F, Ong K, Chan N, Lau E, Halpern M. Prevalence of primary and revision total hip and knee arthroplasty in the United States from 1990 through 2002. J Bone Joint Surg Am 2005;87:1487-1497.
2. Harris WH. The problem is osteolysis. Clin Orthop 1995;311:46-53.
3. Kobayashi A, Freeman MA, Bonfield W, Kadoya Y, Yamac T, Al-Saffar N, Scott G, Revell PA. Number of polyethylene particles and osteolysis in total joint replacements. A quantitative study using a tissue-digestion method. J Bone Joint Surg Br 1997;79:844-848.
4. Sochart DH. Relationship of acetabular wear to osteolysis and loosening in total hip arthroplasty. Clin Orthop 1999;363:135-150. (Pubitemid 29275358)
5. McKellop H, Shen FW, Lu B, Campbell P, Salovey R. Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements. J Orthop Res 1999;17:157-167. (Pubitemid 29190487)
6. Muratoglu OK, Bragdon CR, O'Connor DO, Jasty M, Harris WH. A novel method of crosslinking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties: Recipient of the 1999 HAP Paul Award. J Arthroplasty 2001;16:149-160.
7. Urban JA, Garvin KL, Boese CK, Bryson L, Pedersen DR, Callaghan JJ, Miller RK. Ceramic-on-polyethylene bearing surfaces in total hip arthroplasty. Seventeen to twenty-one-year results. J Bone Joint Surg Am 2001;83:1688-1694.
8. McMinn DJ, Daniel J, Pynsent PB, Pradhan C. Mini-incision resurfacing arthroplasty of hip through the posterior approach. Clin Orthop Relat Res 2005;441:91-98. (Pubitemid 44384209)
9. Clarke IC, Good V, Williams P, Schroeder D, Anissian L, Stark A, Oonishi H, Schuldies J, Gustafson G. Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements. Proc Inst Mech Eng [H] 2000;214:331-347.
10. Fisher J, Hu XQ, Stewart TD, Williams S, Tipper JL, Ingham E, Stone MH, Davies C, Hatto P, Bolton J, Riley M, Hardaker C, Isaac GH, Berry G. Wear of surface engineered metal-on-metal hip prostheses. J Mater Sci Mater Med 2004;15:225-235. (Pubitemid 38388820)
11. Keel JB, Kuster MS. Massive wear of an incompatible metalon-metal articulation in total hip arthroplasty. J Arthroplasty 2004;19:638-642. (Pubitemid 38993195)
12. Korovessis P, Petsinis G, Repanti M, Repantis T. Metallosis after contemporary metal-on-metal total hip arthroplasty. Five to nine-year follow-up. J Bone Joint Surg Am 2006;88:1183-1191. (Pubitemid 43837110)
13. Savarino L, Granchi D, Ciapetti G, Cenni E, Nardi Pantoli A, Rotini R, Veronesi CA, Baldini N, Giunti A. Ion release in patients with metal-on-metal hip bearings in total joint replacement: A comparison with metal-on-polyethylene bearings. J Biomed Mater Res 2002;63:467-474.
14. Dowson D, Hardaker C, Flett M, Isaac GH. A hip joint simulator study of the performance of metal-on-metal joints. I. The role of materials. J Arthroplasty 2004;19:118-123.
15. Bowsher JG, Nevelos J, Williams PA, Shelton JC. 'Severe' wear challenge to 'as-cast' and 'double heat-treated' large-diameter metal-on-metal hip bearings. Proc Inst Mech Eng [H] 2006;220:135-143.
16. Brizuela M, Garcia-Luis A, Viviente JL, Braceras I, Onate JI. Tribological study of lubricious DLC biocompatible coatings. J Mater Sci Mater Med 2002;13:1129-1133. (Pubitemid 36172472)
17. Gutmanas EY, Gotman I. PIRAC Ti nitride coated Ti-6AI-4V head against UHMWPE acetabular cup-hip wear simulator study. J Mater Sci Mater Med 2004;15:327-330. (Pubitemid 39012139)
18. Oka M, Ushio K, Kumar P, Ikeuchi K, Hyon SH, Nakamura T, Fujita H. Development of artificial articular cartilage. Proc Inst Mech Eng [H] 2000;214:59-68.
19. Moro T, Takatori Y, Ishihara K, Konno T, Takigawa Y, Matsushita T, Chung UI, Nakamura K, Kawaguchi H. Surface grafting of artificial joints with a biocompatible polymer for preventing periprosthetic osteolysis. Nat Mater 2004;3:829-837.
20. Moro T, Takatori Y, Ishihara K, Nakamura K, Kawaguchi H. 2006 Frank Stinchfield Award: Grafting of biocompatible polymer for longevity of artificial hip joints. Clin Orthop Relat Res 2006;453:58-63. (Pubitemid 44900960)
21. Kyomoto M, Moro T, Konno T, Takadama H, Kawaguchi H, Takatori Y, Nakamura K, Yamawaki N, Ishihara K. Effects of photo-induced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on physical properties of crosslinked polyethylene in artificial hip joints. J Mater Sci Mater Med 2007;18:1809-1815. (Pubitemid 47224921)
22. Ishihara K, Ueda T, Nakabayashi N. Preparation of phospholipid polymers and their properties as polymer hydrogel membranes. Polym J 1990;22:355-360. (Pubitemid 20719572)
23. Ishihara K, Ziats NP, Tierney BP, Nakabayashi N, Anderson JM. Protein adsorption fromhuman plasma is reduced on phospholipids polymers. J Biomed Mater Res 1991;25:1397-1407.
24. Goda T, Konno T, Takai M, Moro T, Ishihara K. Biomimetic phosphorylcholine polymer grafting from polydimethylsiloxane surface using photo-induced polymerization. Biomaterials 2006;27:5151-5160. (Pubitemid 44080302)
25. Sibarani J, Takai M, Ishihara K. Surface modification on microfluidic devices with 2-methacryloyloxyethyl phosphorylcholine polymers for reducing unfavorable protein adsorption. Colloids Surf B Biointerfaces 2007;54:88-93. (Pubitemid 46014416)
26. Ueda H, Watanabe J, Konno T, Takai M, Saito A, Ishihara K. Asymmetrically functional surface properties on biocompatible phospholipid polymer membrane for bioartificial kidney. J Biomed Mater Res A 2006;77:19-27.
27. Palmer RR, Lewis AL, Kirkwood LC, Rose SF, Lloyd AW, Vick TA, Stratford PW. Biological evaluation and drug delivery application of cationically modified phospholipid polymers. Biomaterials 2004;25:4785-4796.
28. Snyder TA, Tsukui H, Kihara S, Akimoto T, Litwak KN, Kameneva MV, Yamazaki K, Wagner WR. Preclinical biocompatibility assessment of the EVAHEART ventricular assist device: Coating comparison and platelet activation. J Biomed Mater Res A 2007;81:85-92. (Pubitemid 46435456)
29. Kuiper KJ, Nordrehaug JE. Early mobilization after protamine reversal of heparin following implantation of phosphorylcholine-coated stents in totally occluded coronary arteries. Am J Cardiol 2000;85:698-702.
30. Galli M, Sommariva L, Prati F, Zerboni S, Politi A, Bonatti R, Mameli S, Butti E, Pagano A, Ferrari G. Acute and mid-term results of phosphorylcholine- coated stents in primary coronary stenting for acute myocardial infarction. Cathet Cardiovasc Intervent 2001;53:182-187. (Pubitemid 32532177)
31. Lewis AL, Hughes PD, Kirkwood LC, Leppard SW, Redman RP, Tolhurst LA, Stratford PW. Synthesis and characterisation of phosphorylcholine-based polymers useful for coating blood filtration devices. Biomaterials 2000;21:1847-1859. (Pubitemid 30398503)
32. Pavoor PV, Gearing BP, Muratoglu O, Cohen RE, Bellare A. Wear reduction of orthopaedic bearing surfaces using polyelectrolyte multilayer nanocoatings. Biomaterials 2006;27:1527-1533. (Pubitemid 41742206)
33. Yamamoto M, Kato K, Ikada Y. Ultrastructure of the interface between cultured osteoblasts and surface-modified polymer substrates. J Biomed Mater Res 1997;37:29-36. (Pubitemid 27427561)
34. Wang P, Tan KL, Kang ET. Surface modification of poly(tetrafluoroethylene) films via grafting of poly(ethylene glycol) for reduction in protein adsorption. J Biomater Sci Polym Ed 2000;11:169-186. (Pubitemid 30107730)
35. Iwata R, Suk-In P, Hoven VP, Takahara A, Akiyoshi K, Iwasaki Y. Control of nanobiointerfaces generated from well-defined biomimetic polymer brushes for protein and cell manipulations. Biomacromolecules 2004;5:2308-2314. (Pubitemid 39585284)
36. Kyomoto M, Iwasaki Y, Moro T, Konno T, Miyaji F, Kawaguchi H, Takatori Y, Nakamura K, Ishihara K. High lubricious surface of cobalt-chromium-molybdenum alloy prepared by grafting poly(2-methacryloyloxyethyl phosphorylcholine). Biomaterials 2007;28:3121-3130. (Pubitemid 46602518)
37. Yoshida K, Greener EH. Effects of coupling agents on mechanical properties of metal oxide-polymethacrylate composites. J Dent 1994;22:57-62.
38. Matinlinna JP, Vallittu PK. Bonding of resin composites to etchable ceramic surfaces - An insight review of the chemical aspects on surface conditioning. J Oral Rehabil 2007;34:622-630.
39. Bryant SJ, Nuttelman CR, Anseth KS. Cytocompatibility of UV and visible light photoinitiating systems on cultured NIH/3T3 fibroblasts in vitro. J Biomater Sci Polym Ed 2000;11:439-457.
40. ASTM. Annual Book of ASTM Standards, vol.13: Standard specification for cobalt-28 chromium-6 molybdenum alloy casting and casting alloy for surgical implants (UNS R30075). West Conshohocken: ASTM; 2004. ASTM F75-01.
41. ASTM. Annual Book of ASTM Standards vol. 13: Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants. West Conshohocken: ASTM; 2004. ASTM F86-04.
42. Seo M, Sato N. Differential composition profiles in depth of thin anodic oxide films on iron-chromium alloy. Surface Sci 1979;86:601-609.
43. Ishihara K, Iwasaki Y, Ebihara S, Shindo Y, Nakabayashi N. Photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on polyethylene membrane surface for obtaining blood cell adhesion resistance. Colloids Surf B Biointerfaces 2000;18:325-335. (Pubitemid 30479872)
44. Kyomoto M, Moro T, Konno T, Takadama H, Yamawaki N, Kawaguchi H, Takatori Y, Nakamura K, Ishihara K. Enhanced wear resistance of modified cross-linked polyethylene by grafting with poly(2-methacryloyloxyethyl phosphorylcholine). J Biomed Mater Res A 2007;82:10-17. (Pubitemid 46906487)
45. Kyomoto M, Moro T, Miyaji F, Hashimoto M, Kawaguchi H, Takatori Y, Nakamura K, Ishihara K. Effect of 2-methacryloyloxyethyl phosphorylcholine concentration on photo-induced graft polymerization of polyethylene in reducing the wear of orthopaedic bearing surface. J Biomed Mater Res A 2008;86:439-447. (Pubitemid 351969642)
46. Northwood E, Fisher J. A multi-directional in vitro investigation into friction, damage and wear of innovative chondroplasty materials against articular cartilage. Clin Biomech 2007;22:834-842. (Pubitemid 47017496)
47. ISO. Plastics-film and sheeting-measurement of water-contact angle of corona-treated films. International Organization for Standardization 15989. Geneva: ISO; 2004.
48. ASTM. Annual Book of ASTM Standards, vol.13: Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses. West Conshohocken: ASTM; 2004. ASTM F732-00.
49. Li YS, Tran T, Xu Y, Vecchio NE. Spectroscopic studies of trimetoxypropylsilane and bis(trimethoxysilyl)ethane sol-gel coatings on aluminum and copper. Spectrochim Acta A: Mol Biomol Spectrosc 2006;65:779-786. (Pubitemid 44499120)
50. Matsuda T, Kaneko M, Ge S. Quasi-living surface graft polymerization with phosphorylcholine group(s) at the terminal end. Biomaterials 2003;24:4507-4515. (Pubitemid 36960145)
51. Braunecker WA, Matyjaszewski K. Controlled/living radical polymerization: Features, developments, and perspectives. Prog Polym Sci 2007;32:93-146. (Pubitemid 46201961)
52. Zhang Z, Berns AE, Willbold S, Buitenhuis J. Synthesis of poly(ethylene glycol) (PEG)-grafted colloidal silica particles with improved stability in aqueous solvents. J Colloid Interface Sci 2007;310:446-455. (Pubitemid 46654031)
53. Sakamoto H, Doi H, Kobayashi E, Yoneyama T, Suzuki Y, Hanawa T. Structure and strength at the bonding interface of a titanium-segmented polyurethane composite through 3-(trimethoxysilyl) propyl methacrylate for artificial organs. J Biomed Mater Res A 2007;82:52-61. (Pubitemid 46906491)
54. Tsukagoshi T, Kondo Y, Yoshino N. Protein adsorption and stability of poly(ethylene oxide)-modified surfaces having hydrophobic layer between substrate and polymer. Colloids Surf B Biointerfaces 2007;54:82-87. (Pubitemid 46014417)
55. Puleo DA. Biochemical surface modification of Co-Cr-Mo. Biomaterials 1996;17:217-222.
56. Saldívar-García AJ, Lopez HF. Microstructural effects on the wear resistance of wrought and as-cast Co-Cr-Mo-C implant alloys. J Biomed Mater Res A 2005;74:269-274.
57. Sheeja D, Tay BK, Nung LN. Tribological characterization of surface modified UHMWPE against DLC-coated Co-Cr-Mo. Surf Coat Technol 2005;190:231-237. (Pubitemid 39615685)
58. Saikko V. Wear and friction properties of prosthetic joint materials evaluated on a reciprocating pin-on-flat apparatus. Wear 1993;166:169-178. (Pubitemid 23699993)
59. Ishikawa Y, Hiratsuka K, Sasada T. Role of water in the lubrication of hydrogel. Wear 2006;261:500-504.
60. Ho SP, Nakabayashi N, Iwasaki Y, Boland T, LaBerge M. Frictional properties of poly(MPC-co-BMA) phospholipid polymer for catheter applications. Biomaterials 2003;24:5121-5129. (Pubitemid 37272277)
61. Naka MH, Morita Y, Ikeuchi K. Influence of proteoglycan contents and of tissue hydration on the frictional characteristics of articular cartilage. Proc Inst Mech Eng [H] 2005;219:175-182.
62. Bell CJ, Ingham E, Fisher J. Influence of hyaluronic acid on the time-dependent friction response of articular cartilage under different conditions. Proc Inst Mech Eng [H] 2006;220:23-31.
63. Kobayashi M, Terayama Y, Hosaka N, Kaido M, Suzuki A, Yamada N, Torikai N, Ishihara K, Takahara A. Friction behavior of high-density poly(2-methacryloyloxyethyl phosphorylcholine) brush in aqueous media. Soft Matter 2007;2:740-746. (Pubitemid 46794184)
64. Yamamoto S, Ejaz M, Tsujii Y, Fukuda T. Surface interaction forces of well-defined, high-density polymer brushes studied by atomic force microscopy. 2. Effect of graft density. Macromolecules 2000;33:5608-5612.
65. Raviv U, Glasson S, Kampf N, Gohy JF, Jérôme R, Klein J. Lubrication by charged polymers. Nature 2003;425:163-165.