Structure and strength at the bonding interface of a titanium-segmented polyurethane composite through 3-(trimethoxysilyl) propyl methacrylate for artificial organs

Journal of Biomedical Materials Research - Part A

Volumn 82, Issue 1, 2007, Pages 52-61

  Sakamoto, Harumi ^a   Doi, Hisashi ^a   Kobayashi, Equo ^a   Yoneyama, Takayuki ^a   Suzuki, Yoshiaki ^b   Hanawa, Takao ^a  

^a TOKYO MEDICAL AND DENTAL UNIVERSITY   (Japan)

^b RIKEN   (Japan)

Author keywords

Segmented polyurethane; Shear bonding stress; Silane coupling agent; Surface analysis; Titanium

Indexed keywords

BONDING STRENGTH; BONDING STRESS; SEGMENTED POLYURETHANES; SHEAR BONDING STRESS; SILANE COUPLING AGENTS;

ARTIFICIAL ORGANS; GLOW DISCHARGES; INTERFACES (MATERIALS); OPTICAL EMISSION SPECTROSCOPY; SURFACE ANALYSIS; TITANIUM; X RAY PHOTOELECTRON SPECTROSCOPY;

POLYURETHANES;

(3 TRIMETHOXYSILYL)PROPYLMETHACRYLATE; METHACRYLIC ACID DERIVATIVE; POLYURETHAN; SEGMENTED POLYURETHANE; SILANE; TITANIUM; UNCLASSIFIED DRUG;

ARTICLE; ARTIFICIAL ORGAN; COMPOSITE MATERIAL; ELLIPSOMETRY; EVALUATION; GLOW DISCHARGE OPTICAL EMISSION SPECTROSCOPY; MICROSCOPY; SHEAR STRENGTH; SPECTROSCOPY; SURFACE PROPERTY; THICKNESS; X RAY PHOTOELECTRON SPECTROSCOPY;

ARTIFICIAL ORGANS; BIOCOMPATIBLE MATERIALS; BIOMECHANICS; COATED MATERIALS, BIOCOMPATIBLE; HUMANS; MATERIALS TESTING; METHACRYLATES; ORGANOSILICON COMPOUNDS; POLYURETHANES; SPECTRUM ANALYSIS; TITANIUM; X-RAYS;

EID: 34250197886     PISSN: 15493296     EISSN: 15524965     Source Type: Journal    
DOI: 10.1002/jbm.a.30957     Document Type: Article

References (34)

1. Ratner BD, Hoffman AS, Schoen FJ, Lemons JE. Biomaterials Science: An Introduction to Materials in Medicine. Amsterdam: Elsevier; 2004.
2. Nakabayashi N. Development of Medical Polymers and Materials. Tokyo: CMC Publishing; 1998.
3. Takayanagi H. Technology and Application in Polyurethane. Tokyo: CMC Publishing; 1993.
4. Ishihara K, Hatanaka K, Yamaoka T, Oya Y. Biomaterial Science. Tokyo: Tokyo Kagakudozin; 2003.
5. Khan I, Smith N, Jones E, Finch DS, Cameron RE. Analysis and evaluation of a biomedical polycarbonate urethane tested in an in vitro study and an ovine arthroplasty model. II. In vivo investigation. Biomaterials 2005;26:633-643.
6. Khan I, Smith N, Jones E, Finch DS, Cameron RE. Analysis and evaluation of a biomedical polycarbonate urethane tested in an in vitro study and an ovine arthroplasty model. I. Materials selection and evaluation. Biomaterials 2005;26:621-631.
7. Choong SKS, Wood S, Whitfield HN. A model to quantify encrustation on ureteric stents, urethral catheters, and polymers intended for urological use. BJU Int 2000;86:414-421.
8. Kenausis GL, Voros J, Elbert DL, Huang N, Hofer R, Ruiz-Taylor L, Textor M, Hubbell JA, Spencer ND. Poly(L-lysine)-g-poly(ethylene glycol) layers on metal oxide surfaces: Attachment mechanism and effects of polymer architecture on resistance to protein adsorption. J Phys Chem B 2000;104:3298-3309.
9. Ishihara K, Ziats NP, Tierney BP, Nakabayashi N, Anderson JM. Protein adsorption from human plasma is reduced on phospholipid polymers. J Biomed Mater Res 1991;25:1397-1407.
10. Miller BH, Nakajima H, Powers JM, Nunn ME. Bond strength between cements and metals used for endodontic posts. Dent Mater 1998;14:312-320.
11. Matsumura H, Nakabayashi N. Adhesive 4-META/MMA-TBB opaque resin with poly(methyl methacrylate)-coated titanium dioxide. J Dent Res 1988;69:1614-1616.
12. Fujishima A, Fujishima Y, Ferracane JL. Shear bond strength of four commercial bonding systems to cpTi. Dent Mater 1995; 11:82-86.
13. Qiu J, Dominici JT, Lifland MI, Okazaki K. Composite titanium dental implant fabricated by electro-discharge compaction. Biomaterials 1997;18:153-160.
14. Rilo B, da Silva JL, Martinez-Insua A, Santana U. A titanium and visible light-polymerized resin obturator. J Prosthet Dent 2002;87:407-409.
15. Taira Y, Imai Y. Primer for bonding resin to metal. Dent Mater 1995;11:2-6.
16. Smith NA, Antoun GG, Ellis AB, Crone WC. Improved adhesion between nickel-titanium shape memory alloy and polymer matrix via silane coupling agents. Compos A 2004;35: 1307-1312.
17. Yoshida K, Matsumura H, Tanaka T, Atsuta M. Properties of titanium dioxide-polymer composite with titanate coupling agents. J Dent Mater 1989;8:629-635.
18. Abboud M, Casaubieilh L, Morval F, Fontanille M, Duguet E. PMMA-based composite materials with reactive ceramic fillers. IV. Radiopacifying particles embedded in PMMA beads for acrylic bone cements. J Biomed Mater Res 2000;53:728-736.
19. Yoshida K, Tanagawa M, Atsuta M. Effects of filler composition and surface treatment on the characteristics of opaque resin composites. J Biomed Mater Res 2001;58:525-530.
20. Kanie T, Arikawa H, Fujii K, Inoue K. Physical and mechanical properties of PMMA resins containing γ-methacryloxyproplytrimethoxysilane. J Oral Rehabil 2004;31:161-171.
21. Ferracane JL, Berge HX, Condon JR. In vitro aging of dental composites in water-effect of degree of conversion, filler volume, and filler matrix coupling. J Biomed Mater Res 1998;42: 465-472.
22. Bexell U, Olsson M, Jhansson M, Samuelsson J, Sundell P-E. A tribological study of a novel pre-treatment with linseed oil bonded to mercaptosilane- treated aluminum. Surf Coat Technol 2003;166:141-152.
23. Bexell U, Olsson M, Sundell P-E, Jhansson M, Carlsson P, Hellsing M. A ToF-SIMS study of linseed oil bonded to mercaptosilane-treated aluminum. Appl Surf Sci 2004231/232: 362-365.
24. Jayaseelan SK, Ooji WJV. Rubber-to-metal bonding by silanes. J Adhes Sci Technol 2001;15:967-991.
25. Zhang F, Kang ET, Neoh KG, Wang P, Tan KL. Surface modification of stainless steel by grafting of poly(ethylene glycol) for reduction in protein adsorption. Biomaterials 2001;22:1541-1548.
26. Asami K. A precisely consistent energy calibration method for X-ray photoelectron spectroscopy. J Electron Spectrosc 1976; 9:469-478.
27. Asami K, Hashimoto K, Shimodaira S. XPS determination of compositions of alloy surfaces and surface oxides on mechanically polished iron-chromium alloys. Corros Sci 1977;17:713-723.
28. Asami K, Hashimoto K. An XPS study of the surfaces on Fe-Cr, Fe-Co, and Fe-Ni alloys after mechanical polishing. Corros Sci 1984;24:83-97.
29. Shimizu K, Habazaki H, Skeldon P, Thompson GE, Wood GC. GD-OES depth profiling analysis of amorphous Ni-P-plated aluminum hard disks. Surf Interface Anal 2000;29:151-154.
30. Fernandez B, Bordel N, Pereiro R, Sanz-Medel A. Radio frequency glow discharge-optical emission spectrometry for direct quantitative analysis of glass. Anal Chem 2004;76:1039-1044.
31. Hammond K, Holubka JW, DeVries JE, Dickie RA. The application of X-ray photo-electron spectroscopy: A study of interfacial composition-induced paint de-adhesion. Corros Sci 1981;21:239-253.
32. Asami K, Chen SC, Habazaki H, Hashimoto K. The surface characterization of titanium and titanium-nickel alloys in sulfuric acid. Corros Sci 1993;35:43-49.
33. Asami K, Hashimoto K. The X-ray photo-electron spectra of several oxides of ion and chromium. Corros Sci 1977;17:559-570.
34. Hibino Y, Kuroiwa A, Kurosawa S, Kanke S, Hashimoto H. Bond strength of dental luting cements to titanium castings. J Dent Mater 1990;9:79-85.