Yield strength of tantalum for shockless compression to 18 GPa

Journal of Applied Physics

Volumn 106, Issue 7, 2009, Pages

  Asay, J R ^a   Ao, T ^a   Vogler, T J ^a   Davis, J P ^a   Gray, G T ^b  

^a SANDIA NATIONAL LABORATORIES   (United States)

^b LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ASYMPTOTIC VALUES; ELASTIC LIMIT; FLOW STRENGTH; FLOW STRESS; LONGITUDINAL STRESS; MAGNETIC LOADING; PEAK LOADING; PEAK STRESS; PLASTIC STRAIN; POLYCRYSTALLINE; RAMP LOADING; SAMPLE THICKNESS; WAVE PROFILES; YIELD STRENGTH;

ANNEALING; COLD ROLLING; STRAIN RATE; TANTALUM; UNLOADING; YIELD STRESS;

STRESS ANALYSIS;

EID: 70350147735     PISSN: 00218979     EISSN: None     Source Type: Journal    
DOI: 10.1063/1.3226882     Document Type: Article

References (77)

1. G. T. Gray III, S. Bingert, S. J. Wright, and S. R. Chen, in High Temperature Silicides and Refractory Alloys, edited by, C. I. Briant, J. J. Petrovic, B. P. Bewlay, A. K. Vasudevan, and, H. A. Lipsitt, (Materials Research Society, Pittsburgh, 1994), p. 407.
2. G. T. Gray III, N. K. Bourne, and J. C. F. Millet, J. Appl. Phys. 0021-8979 94, 6430 (2003). 10.1063/1.1620679
3. G. T. Gray III and K. S. Vecchio, Metall. Mater. Trans. A 1073-5623 26A, 2555 (1995). 10.1007/BF02669413
4. J. W. Christian, Metall. Trans. A 0360-2133 14A, 1237 (1983). 10.1007/BF02664806
5. J. C. F. Millet, G. T. Gray III, and N. K. Bourne, J. Appl. Phys. 0021-8979 101, 033520 (2007). 10.1063/1.2427096 (Pubitemid 46280854)
6. R. G. McQueen, S. P. Marsh, J. W. Taylor, J. N. Fritz, and W. J. Carter, in High Velocity Impact Phenomena, edited by, R. Kinslow, (Academic, New York, 1970), Chap., p. 293.
7. D. C. Wallace, Phys. Rev. B 0163-1829 22, 1477 (1980). 10.1103/PhysRevB.22.1477
8. W. J. Nellis, in High Pressure Measurement Techniques, edited by, G. N. Peggs, (Applied Science, London, 1983), pp. 69-89.
9. L. W. Davison and R. A. Graham, Phys. Rep. 0370-1573 55, 255 (1979). 10.1016/0370-1573(79)90026-7
10. S. -R. Chen and G. T. Gray III, Metall. Mater. Trans. A 1073-5623 27A, 2994 (1996). 10.1007/BF02663849
11. S. -R. Chen and G. T. Gray III, in Second International Conference on Tungsten and Refractory Metals, edited by, A. Bose, and and, R. J. Dowling, 17-19 October (McLean, VA, Princeton, New Jersey, 1995), p. 489.
12. P. J. Maudlin, J. F. Bingert, and G. T. Gray III, Int. J. Plast. 0749-6419 19, 483 (2003). 10.1016/S0749-6419(01)00061-4 (Pubitemid 35432855)
13. T. J. Vogler, J. Appl. Phys. 0021-8979 106, 053530 (2009). 10.1063/1.3204777
14. D. Preston, D. Tonks, and D. Wallace, J. Appl. Phys. 0021-8979 93, 211 (2003). 10.1063/1.1524706
15. J. R. Asay, AIP Conf. Proc. 0094-243X 505, 261 (2000). 10.1063/1.1303469
16. C. Hall, M. D. Knudson, J. R. Asay, R. Lemke, and B. Oliver, Rev. Sci. Instrum. 0034-6748 72, 3587 (2001). 10.1063/1.1394178 (Pubitemid 34046286)
17. D. B. Reisman, A. Toor, R. Cauble, C. A. Hall, J. R. Asay, M. D. Knudson, and M. D. Furnish, J. Appl. Phys. 0021-8979 89, 1625 (2001). 10.1063/1.1337082 (Pubitemid 33629978)
18. R. F. Smith, J. H. Eggert, A. Jankowski, P. M. Celliers, M. J. Edwards, Y. M. Gupta, J. R. Asay, and G. W. Collins, Phys. Rev. Lett. 0031-9007 98, 065701 (2007). 10.1103/PhysRevLett.98.065701 (Pubitemid 46220750)
19. D. K. Bradley, J. H. Eggert, R. F. Smith, S. T. Prisbrey, D. G. Hicks, D. G. Braun, J. Biener, A. V. Hamza, R. E. Rudd, and G. W. Collins, Phys. Rev. Lett. 0031-9007 102, 075503 (2009). 10.1103/PhysRevLett.102.075503
20. D. B. Hayes, C. A. Hall, J. R. Asay, and M. D. Knudson, J. Appl. Phys. 0021-8979 96, 5520 (2004). 10.1063/1.1803108
21. S. D. Rothman, J. -P. Davis, J. Maw, C. M. Robinson, C. M. Parker, K. Parker, and J. Palmer, J. Phys. D 0022-3727 38, 733 (2005). 10.1088/0022-3727/ 38/5/011 (Pubitemid 40402044)
22. J. -P. Davis, J. Appl. Phys. 0021-8979 99, 103512 (2006). 10.1063/1.2196110 (Pubitemid 43838533)
23. J. Eggert, M. Bastea, D. B. Reisman, S. Rothman, J. -P. Davis, M. D. Knudson, D. B. Hayes, G. T. Gray III, D. Erskine, and G. W. Collins, AIP Conf. Proc. 0094-243X 955, 1177 (2007). 10.1063/1.2832929
24. J. R. Asay, C. A. Hall, K. G. Hollan, M. A. Bernard, W. A. Stygar, R. B. Spielman, S. E. Rosenthal, D. H. McDaniel, and D. B. Hayes, AIP Conf. Proc. 0094-243X 505, 1151 (2000). 10.1063/1.1303667
25. D. B. Hayes, C. A. Hall, J. R. Asay, and M. D. Knudson, J. Appl. Phys. 0021-8979 94, 2331 (2003). 10.1063/1.1595710
26. J. -P. Davis and D. B. Hayes, in Shock Compression of Condensed Matter-2007, edited by, M. Elert, M. D. Furnish, R. Chau, N. C. Holmes, and, J. Nguyen, (American Institute of Physics, Melville, NY, 2007), p. 159.
27. L. C. Chhabildas and L. M. Barker, in Shock-Waves in Condensed Matter-1987, edited by, S. C. Schmidt, and, N. C. Holmes, (North-Holland, Amsterdam, 1988), p. 111.
28. L. C. Chhabildas and J. R. Asay, in Shock-Wave and High Strain-Rate Phenomena in Materials, edited by, M. A. Meyers, L. E. Murr, and, K. P. Staudhammer, (Dekker, New York, 1992), p. 947.
29. J. R. Asay, T. Ao, J. -P. Davis, C. Hall, T. J. Vogler, and G. T. Gray III, J. Appl. Phys. 0021-8979 103, 083514 (2008). 10.1063/1.2902855 (Pubitemid 351623536)
30. T. J. Vogler, T. Ao, and J. R. Asay, Int. J. Plast. 0749-6419 25, 671 (2009). 10.1016/j.ijplas.2008.12.003
31. T. Ao, M. D. Knudson, J. R. Asay, and J. -P. Davis, J. Appl. Phys. 0021-8979 (to be published).
32. K. T. Lorenz, M. J. Edwards, S. G. Glendinning, A. F. Jankowski, J. McNaney, S. M. Pollaine, and B. A. Remington, Phys. Plasmas 1070-664X 12, 056309 (2005). 10.1063/1.1873812 (Pubitemid 40860927)
33. R. Feng, G. F. Raiser, and Y. M. Gupta, J. Appl. Phys. 0021-8979 83, 79 (1998). 10.1063/1.366704
34. Y. V. Bat'kov, N. N. Knyazev, A. Novikov, V. A. Rayerskii, and N. D. Fishman, Combust., Explos. Shock Waves 0010-5082 35, 707 (1999). 10.1007/BF02674547
35. Z. Rosenberg, N. K. Bourne, G. T. Gray III, and J. C. F. Millett, in Shock Compression Science of Condensed Matter-2001, edited by, M. D. Furnish, N. N. Thadhani, and, Y. Horie, (American Institute of Physics, Melville, NY, 2002), p. 575.
36. C. H. M. Simha and Y. M. Gupta, J. Appl. Phys. 0021-8979 96, 1880 (2004). 10.1063/1.1763992
37. Z. Rosenberg and N. K. Bourne, Meas. Sci. Technol. 0957-0233 18, 1843 (2007). 10.1088/0957-0233/18/7/007 (Pubitemid 46950755)
38. T. Ao, J. R. Asay, S. Chantrenne, M. R. Baer, and C. A. Hall, Rev. Sci. Instrum. 0034-6748 79, 013903 (2008). 10.1063/1.2827509 (Pubitemid 351190828)
39. K. G. Hoge and A. K. Mukherjee, J. Mater. Sci. 0022-2461 12, 1666 (1977). 10.1007/BF00542818
40. P. S. Follansbee and G. T. Gray III, Metall. Trans. A 20, 863 (1989). 10.1007/BF02651653
41. P. S. Follansbee, J. C. Huang, and G. T. Gray III, Acta Metall. Mater. 0956-7151 38, 1241 (1990). 10.1016/0956-7151(90)90195-M
42. P. S. Follansbee and U. F. Kocks, Acta Metall. 0001-6160 36, 81 (1988). 10.1016/0001-6160(88)90030-2 (Pubitemid 18626871)
43. D. L. Tonks, R. S. Hixson, J. N. Johnson, and G. T. Gray III, AIP Conf. Proc. 0094-243X 309, 997 (1994). 10.1063/1.46203
44. G. T. Gray and A. D. Rollett, in High Strain Rate Behavior of Refractory Metals and Alloys TMS, edited by, R. Asfahani, E. Chen, and, A. Crowson, (The Minerals, Metals, and Materials Society, Warrendale, PA, 1992), p. 303.
45. D. Lasilla and G. T. Gray III, J. Phys. IV 1, C3-19 (1991).
46. R. J. Arsenault and A. Lawley, in Work Hardening, edited by, J. P. Hirth, and, J. Weertman, (Gordon and Breach, New York, 1968), p. 33.
47. F. J. Zerilli and R. W. Armstrong, J. Appl. Phys. 0021-8979 68, 1580 (1990). 10.1063/1.346636
48. C. A. Bronkhorst, E. K. Cerreta, Q. Xue, P. J. Maudlin, T. A. Mason, and G. T. Gray III, Int. J. Plast. 0749-6419 22, 1304 (2006). 10.1016/j.ijplas.2005. 10.002 (Pubitemid 43290612)
49. U. F. Kocks, ASME J. Eng. Mater. Technol. 0094-4289 98, 76 (1976).
50. B. Aidun and Y. M. Gupta, J. Appl. Phys. 0021-8979 69, 6998 (1991). 10.1063/1.347639
51. C. A. Michaluk, G. T. Gray III, and T. Chatterjee, Aerospace, Defense and Demanding Applications-1993 (Metal Powder Industries, Princeton, NJ, 1993), p. 195.
52. G. T. Gray III, S. I. Wright, S. R. Bingert, S. -R. Chen, and J. F. Bingert, in Tantalum TMS, edited by, E. Chen, A. Crowson, E. Lavarnia, W. Ebihara, and, P. Kumar, (The Minerals, Metals, and Materials Society, Warrendale, PA, 1992), p. 239.
53. S. I. Wright, A. J. Beaudom, and G. T. Gray III, Mater. Sci. Forum 0255-5476 157-162, 1695 (1994). 10.4028/www.scientific.net/MSF.157-162.1695
54. J. B. Clark, R. K. Garrett, Jr., T. L. Jungling, and R. L. Asfahani, Metall. Trans. A 0360-2133 23A, 2183 (1992). 10.1007/BF02646011
55. S. I. Wright, G. T. Gray III, and A. D. Rollett, Metall. Mater. Trans. A 1073-5623 25A, 1025 (1994). 10.1007/BF02652277
56. W. Kock and P. Paschen, J. Met. 0148-6608 41, 33 (1989).
57. D. J. Steinberg, LLNL Report No. UCRL-MA-106439, 1996.
58. D. J. Steinberg, Int. J. Impact Eng. 0734-743X 5, 603 (1987). 10.1016/0734-743X(87)90075-3
59. D. J. Steinberg, AIP Conf. Proc. 0094-243X 370, 311 (1996). 10.1063/1.50712
60. D. J. Steinberg, S. G. Cochran, and M. W. Guinan, J. Appl. Phys. 0021-8979 51, 1498 (1980). 10.1063/1.327799 (Pubitemid 11431830)
61. G. R. Fowles, J. Appl. Phys. 0021-8979 32, 1475 (1961). 10.1063/1.1728382
62. J. R. Asay and J. Lipkin, J. Appl. Phys. 0021-8979 49, 4242 (1978). 10.1063/1.325340 (Pubitemid 8635334)
63. J. R. Asay and L. C. Chhabildas, in Shock Waves and High Strain-Rate Phenomena in Metals, edited by, M. A. Meyers, and, L. E. Murr, (Plenum, New York, 1981), p. 417.
64. T. J. Vogler and L. C. Chhabildas, Int. J. Impact Eng. 0734-743X 33, 812 (2006). 10.1016/j.ijimpeng.2006.09.069 (Pubitemid 44855399)
65. J. N. Johnson, R. S. Hixson, D. L. Tonks, and G. T. Gray III AIP Conf. Proc. 0094-243X 309, 1095 (1994). 10.1063/1.46295
66. H. Huang and J. R. Asay, J. Appl. Phys. 0021-8979 98, 033524 (2005). 10.1063/1.2001729 (Pubitemid 41204766)
67. L. M. Barker and R. E. Hollenbach, J. Appl. Phys. 0021-8979 43, 4669 (1972). 10.1063/1.1660986
68. J. R. Asay, G. R. Fowles, G. D. Duvall, M. H. Miles, and R. F. Tinder, J. Appl. Phys. 0021-8979 43, 2132 (1972). 10.1063/1.1661464
69. C. Greef, S. Rudin, S. Crockett, and J. Wills, Los Alamos National Laboratory, private communication (2009).
70. S. -R. Chen, private communication (2009).
71. D. E. Grady, Sandia National Laboratories, Albuquerque, NM, unpublished data reported in Ref..
72. M. D. Furnish, L. C. Chhabildas, and D. J. Steinberg, AIP Conf. Proc. 0094-243X 309, 1099 (1994). 10.1063/1.46296
73. M. D. Furnish, T. J. Vogler, C. S. Alexander, W. D. Reinhart, W. M. Trott, and L. C. Chhabildas, AIP Conf. Proc. 0094-243X 955, 521 (2007). 10.1063/1.2833129
74. W. Cochardt, G. Schoek, and H. Wiedersich, Acta Metall. 0001-6160 3, 533 (1955). 10.1016/0001-6160(55)90111-5
75. J. R. Low and M. Gensamer, Trans AIME 158, 207 (1944).
76. G. T. Gray III, R. Hixson, and C. E. Morris, in Shock Compression of Condensed Matter-1991, edited by, S. C. Schmidt, R. D. Dick, and, J. W. Forbes, (Elsevier Science, New York, 1992), p. 427.
77. K. E. Duprey and R. J. Clifton, in Shock Compression of Condensed Matter-1999, edited by, M. D. Furnish, L. C. Chhabildas, and, R. S. Hixson, (AIP, New York, 2000), p. 447.