An experimental and numerical study of the localization behavior of tantalum and stainless steel

International Journal of Plasticity

Volumn 22, Issue 7, 2006, Pages 1304-1335

  Bronkhorst, C A ^a   Cerreta, E K ^b   Xue, Q ^b   Maudlin, P J ^a   Mason, T A ^b   Gray III, G T ^b  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

^b LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

B. elastic viscoplastic material; Shear localization

Indexed keywords

ANISOTROPY; DEFORMATION; GEOMETRY; SINGLE CRYSTALS; STAINLESS STEEL;

ADIABATIC CONTINUUM MODELS; B. ELASTIC-VISCOPLASTIC MATERIAL; SHEAR LOCALIZATION;

TANTALUM;

EID: 33344468050     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2005.10.002     Document Type: Article

References (51)

1. F.L. Addessio, and J.N. Johnson Rate-dependent ductile failure model J. Appl. Phys. 74 1993 1640 1648
2. L. Anand, and S.R. Kalidindi The process of shear band formation in plane strain compression of fcc metals: effects of crystallographic texture Mech. Mater. 17 1994 223 243
3. R.J. Asaro Geometrical effects in the inhomogeneous deformation of ductile single crystals Acta Metall. 27 1979 445 453
4. R.J. Asaro, and J.R. Rice Strain localization in ductile single crystals J. Mech. Phys. Solids 25 1977 309 338
5. R.C. Batra, and N.A. Jaber Failure mode transition speeds in an impact loaded prenotched plate with four thermoviscoplastic relations Int. J. Fracture 110 2001 47 71
6. R.C. Batra, and M.H. Lear Simulation of brittle and ductile fracture in an impact loaded prenotched plate Int. J. Fracture 126 2004 179 203
7. R.C. Batra, and M.H. Lear Adiabatic shear bonding in plake strain tensile deformations of eleven thermoelastoviscoplastic materials with finite thermal wave speed Int. J. Plasticity 21 2005 1521 1545
8. R. Becker An analysis of shear localization during bending of a polycrystalline sheet J Appl. Mech. 59 1992 491 496
9. A.S. Bonnet-Lebouvier, and J.R. Klepaczko Numerical study of shear deformation in Ti-6Al-4V at medium and high strain rates, critical impact velocity in shear Int. J. Impact Eng. 27 2002 755 769
10. H.E. Boyer T.L. Gall Metals Handbook Desk ed. 1985 ASM Metals Park, OH
11. L. Campagne, L. Daridon, and S. Ahzi A physically based model for dynamic failure in ductile metals Mech. Mater. 37 2005 869 886
12. Y.W. Chang, and R.J. Asaro An experimental study of shear localization in aluminum-copper single crystals Acta Metall. 29 1981 241 257
13. Chen, S.R., 2003. Private communication.
14. S.R. Chen, and G.T. Gray III Constitutive behavior of tantalum and tantalum-tungsten alloys Metall. Mater. Trans. A 27 1996 2994 3006
15. K.S. Cheong, E.P. Busso, and A. Arsenlis A study of microstructural length scale effects on the behavior of FCC polycrystals using strain gradient concepts Int. J. Plasticity 21 2005 1797 1844
16. M. Dao, and M. Lie A micromechanics study on strain-localization-induced fracture initiation in bending using crystal plasticity models Philos. Mag. A 81 2001 1997 2020
17. L. Daridon, O. Oussouaddi, and S. Ahzi Influence of the material constitutive models on the adiabatic shear band spacing: MTS, power law and Johnson-Cook models Int. J. Solid Struct. 41 2004 3109 3124
18. O. Diard, S. Leclercq, G. Rousselier, and G. Cailletaud Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity - application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries Int. J. Plasticity 21 2005 691 722
19. P.S. Follansbee, and U.F. Kocks A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable Acta Metall. 36 1988 81 93
20. W.H. Gourdin Constitutive properties of copper and tantalum at high rates of tensile strain: expanding ring results Mechanical Properties of Materials at High Strain 1989 Institute of Physics Oxford
21. G.T. Gray III, N.K. Bourne, and J.C.F. Millett Shock response of tantalum: lateral stress and shear strength through the front J. Appl. Phys. 94 2003 6430 6436
22. G.T. Gray III, and K.S. Vecchio Influence of peak pressure and temperature on the structure/property response of shock-loaded Ta and Ta-10W Met. Mat. Trans. A 26A 1995 2555 2563
23. A.L. Gurson Continuum theory of ductile rupture by void nucleation and growth: Part 1 - Yield criteria and flow rules for porous ductile media J. Eng. Mater. Tech. 99 1977 2 15
24. S.V. Harren, H.E. Dève, and R.J. Asaro Shear band formation in plane strain compression Acta Metall. 36 1988 2435 2480
25. K. Inal, P.D. Wu, and K.W. Neale Finite element analysis of localization in FCC polycrystalline sheets under plane stress tension Int. J. Solid Struct. 39 2002 3469 3486
26. G.R. Johnson, S.R. Beissel, R.A. Stryk, C.A. Gerlach, and T.J. Holmquist User Instructions for the 2003 Version of the EPIC Code 2003 Network Computing Services Inc. Minneapolis, MN
27. J.F. Kalthoff, and S. Winkler Failure mode transition at high rates of shear loading C.Y. Chiem H.-D. Kunze L.W. Meyer Impact Loading and Dynamic Behavior of Materials 1987 Verlag 185
28. J.R. Klepaczko, and M. Klosak Numerical study of the critial impact valocity in shear Eur. J. Mech. A. 18 1999 93 113
29. U.F. Kocks Laws for work-hardening and low-temperature creep J. Eng. Mater. Tech. 98 1976 76 85
30. U.F. Kocks, A.S. Argon, and M.F. Ashby Thermodynamics and kinetics of slip Progress in Materials Science 1975 Pergamon Oxford
31. W. Kock, and P. Paschen Tantalum - processing, properties and applications J. Mater. 41 1989 33 39
32. M. Kothari, and L. Anand Elasto-viscoplastic constitutive equations for polycrystalline metals: application to tantalum J. Mech. Phys. Solids 46 1998 51 83
33. S. Li, W.K. Kiu, A.J. Rosakis, T. Belytschko, and W. Hao Mesh-free Galerkin simulations of dynamic shear band propagation and failure mode transition Int. J. Solid Struct. 39 2002 1213 1240
34. S.P. Marsh LASL Shock Hugoniot Data 1980 University of California Press Berkeley, CA 214
35. Mason, T.A., 2004. Private communication.
36. T.A. Mason, and P.J. Maudlin Effects of higher-order anisotropy elasticity using textured polycrystals in three-dimensional wave propagation problems Mech. Mater. 31 1999 861 882
37. P.J. Maudlin, J.F. Bingert, J.W. House, and S.R. Chen On the modeling of the Taylor cylinder impact test for orthotropic textured materials: experiments and simulations Int. J. Plasticity 15 1999 139 166
38. Maudlin, P.J., Mason, T.A., Zuo, Q.H., Addessio, F.L., 2003. TEPLA-a: coupled anisotropic elastoplasticity and damage. The Joint DoD/DOE Munitions Technology Program Progress Report, vol. 1. LA-UR-14015-PR.
39. H. Mecking, and V.F. Kocks Kinetics of flow and strain hardening Acta Metall. 29 1981 1865 1875
40. M.A. Meyers, Y.J. Chen, F.D.S. Marquis, and D.S. Kim High-strain, high-strain-rate behavior of tantalum Metall. Mater. Trans. A 26 1995 2493 2501
41. L.W. Meyers, and S. Manwaring Critical adiabatic shear strength of low alloyed steel under compressive loading L.E. Murr K.P. Staudhammer M. Meyers Metallurgical Applications of Shock Wave and High Strain Rate Phenomena 1986 Marcel Dekker New York 657 674
42. M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, and Q. Xue Shear localization in dynamic deformation of materials: microstructural evolution and self-organization Mater. Sci. Eng. A 317 2001 204 225
43. M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Pérez-Prado, and T.R. McNelley Microstructural evolution in adiabatic shear localization in stainless steel Acta Mater. 51 2003 1307 1325
44. S. Nemat-Nasser, and J.B. Isaacs Direct measurement of isothermal flow stress of metals at elevated temperatures and high strain rates with application to Ta and Ta-W alloys Acta Mater. 45 1997 907 919
45. S. Nemat-Nasser, Y.-F. Li, and J.B. Isaacs Experimental/computational evaluation of flow stress at high strain rates with application to adiabatic shear banding Mech. Mater. 17 1994 111 134
46. D.E. Solas, and C.N. Tomé Texture and strain localization prediction using a N-site polycrystal model Int. J. Plasticity 17 2001 737 753
47. Y.P. Varshni Temperature dependence of the elastic constants Phys. Rev. B 2 1970 3952 3958
48. G.L. Webb, R. Gibala, and T.E. Mitchell Effect of normal stress on yield asymmetry in high purity tantalum crystals Metall. Trans. 5 1974 1581 1584
49. Q. Xue, G.T. Gray III, B.L. Henrie, S.A. Maloy, and S.R. Chen Influence of shock prestraining on the formation of shear localization in 304 stainless steel Metall. Mat. Trans. A 36 2005 1471 1486
50. M. Zhou, G. Ravichandran, and A.J. Rosakis Dynamically propagating shear bands in impact-loaded prenotched plates - II. Numerical simulations J. Mech. Phys. Solids 44 1996 1007 1032
51. M. Zhou, A.J. Rosakis, and G. Ravichandran Dynamically propagating shear bands in impact-loaded prenotched plates - I. Experimental investigations of temperature signatures and propagation speed J. Mech. Phys. Solids 44 1996 981 1006