Seismic behavior factors of buckling-restrained braced frames

Structural Engineering and Mechanics

Volumn 33, Issue 3, 2009, Pages 261-284

  Kim, Jinkoo ^a   Park, Junhee ^a   Kim, Sang Dae ^b  

^a Sungkyunkwan University   (South Korea)

^b Korea University   (South Korea)

Author keywords

Behavior factors; Buckling restrained braces; Building systems; Response modification factors; Seismic design

Indexed keywords

BUCKLING; EARTHQUAKES; SEISMIC DESIGN; SEISMIC RESPONSE; STRUCTURAL FRAMES;

BEHAVIOR FACTOR; BUCKLING RESTRAINED BRACED FRAMES; BUCKLING RESTRAINED BRACES; BUILDING SYSTEMS; INCREMENTAL DYNAMIC ANALYSIS; NONLINEAR STATIC PUSHOVER ANALYSIS; RESPONSE MODIFICATION FACTORS; STATIC AND DYNAMIC PERFORMANCE;

FACTOR ANALYSIS;

EID: 70350144296     PISSN: 12254568     EISSN: None     Source Type: Journal    
DOI: 10.12989/sem.2009.33.3.261     Document Type: Article

References (27)

1. AISC (1998), Load and Resistance Factor Design Specification for Structural Steel Buildings, American Institute of Steel Construction, Chicago.
2. AISC/SEAOC (2001), Recommended Provision for Buckling-Restrained Braced Frames (draft).
3. AISC (2005), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Illinois.
4. ATC (1995), A Critical Review of Current Approaches to Earthquake-resistant Design, ATC-34, Applied Technology Council, Redwood City, California, 31-36
5. ATC (1995), Structural Response Modification Factors, ATC-19, Applied Technology Council, Redwood City, California, 5-32.
6. Balendra, T. and Huang, X. (2003), "Overstrength and ductility factors for steel frames designed according to BS 5950", J. Struct. Eng., ASCE, 129(8), 1019-1035.
7. Black, C, Makris, N. and Aiken, I. (2002), Component Testing, Stability Analysis and Characterization of Buckling Restrained Unbonded Braces, Report No. PEER-2002/08, PEERC, University of California at Berkeley.
8. BSSC (2004), Recommended Provisions for Seismic Regulations for New Buildings and Other Structures; Part 1: Provisions (FEMA-450), Building Seismic Safety Council, Washington, D.C.
9. BSSC (2000), Prestandard and Commentary for the Seismic Rehabilitation of Building, FEMA-356, Federal Emergency Management Agency, Washington, D.C.
10. BSSC (2001), Recommended Provisions for Seismic Regulations for New Buildings and Other Structures; Part 2: Commentary. FEMA-369, Building Seismic Safety Council, Washington, D.C.
11. Carden, L.P., Itani, A.M. and Buckle, I.G (2006), "Seismic performance of steel girder bridges with ductile cross frames using buckling-restrained braces", J. Struct. Eng., 132(3), 338-345.
12. Choi, H. and Kim, J. (2009), "Evaluation of seismic energy demand and its application on design of buckling-restrained braced frames", Struct. Eng. Mech., 31(1), 93-112.
13. Iwata, M. and Murai, M. (2006), "Buckling-restrained brace using steel mortar planks; performance evaluation as a hysteretic damper", Earthq. Eng. Struct. Dyn., 35, 1807-1826.
14. ICC (2003), International Building Code, International Code Council, Inc., Birmingham, AL.
15. Kim, J., Choi, H. and Chung, L. (2004), "Energy-based seismic design of structures with buckling-restrained braces", Steel Compos. Struct., 4(6), 437-452. (Pubitemid 40002737)
16. Kim, J. and Choi, H. (2005), "Response modification factors of chevron-braced frames", Eng. Struct., 27(2), 285-300.
17. Maheri, M.R. and Akbari, R. (2003), "Seismic behavior factor, R, for steel X-braced and knee-braced RC buildings", Eng. Struct., 25(15), 1505-1513.
18. Merritt, S., Uang, CM. and Benzoni, G (2003), Subassemblage Testing of Corebrace Buckling-restrained Braces, Report No. TR-2003/01, U.C.
19. San Diego. Newmark, N.M. and Hall, W.J. (1982), Earthquake Spectra and Design, EERI Monograph Series, Oakland (CA), Earthquake Engineering Research Institute.
20. Osteraas, J.D. (1990), Strength and Ductility Considerations in Seismic Design, Ph.D. dissertation, Stanford University, Stanford, California.
21. Prakash, V., Powell, GH. and Campbell, S. (1993), DRAIN-2DX, Static and Dynamic Analysis of Plane Structure. NISEE, EERC, U.C. Berkeley.
22. Somerville, P., Smith, H., Puriyamurthala, S. and Sun, J. (1997), Development of Ground Motion Time Histories for Phase 2 of the FEMA/SAC Steel Project, SAC/BD 97/04, Sacramento, CA.
23. Tremblay, R., Bolduc, R, Neville, R. and DeVall, R. (2006), "Seismic testing and performance of bucklingrestrained bracing systems", Can. J. Civil Eng., 33, 183-198.
24. Usami, T., Lu, Z. and Ge, H. (2005), "A seismic upgrading method for steel arch bridges using bucklingrestrained braces", Earthq. Eng. Struct. Dyn., 34, 471-496.
25. Valles, R.E., Reinhorn, A.M., Kunnath, S.K., Li, C. and Madan, A. (1996), IDARC 2D version 4.0: A Computer Program for the Inelastic Damage Analysis of Buildings, Technical Report NCEER-96-10010, National Center for Earthquake Engineering Research, State University of New York at Buffalo.
26. Vamvatsikos, D. and Cornell, C.A. (2001), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514.
27. Xie, Q. (2005), "State of the art of buckling-restrained braces in Asia", J. Constr. Steel Res., 61, 727-748.