State of the art of buckling-restrained braces in Asia

Journal of Constructional Steel Research

Volumn 61, Issue 6, 2005, Pages 727-748

  Xie, Qiang ^a  

^a TONGJI UNIVERSITY   (China)

Author keywords

Buckling; Buckling restrained braces; Cyclic loading test; Damper; Hysteretic behavior; Steel frame

Indexed keywords

BUCKLING; CYCLIC LOADS; DEFLECTION (STRUCTURES); DEFORMATION; HYSTERESIS; STEEL STRUCTURES; STIFFNESS;

BUCKLING-RESTRAINED BRACES; CYCLIC LOADING TESTS; DAMPERS; HYSTERESIS BEHAVIOR; STEEL FRAMES;

STRUCTURAL FRAMES;

EID: 14544292414     PISSN: 0143974X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jcsr.2004.11.005     Document Type: Article

References (50)

1. Yoshino T, Karino Y Experimental study on shear wall with braces: Part 2. Summaries of technical papers of annual meeting, vol. 11. Architectural Institute of Japan, Structural Engineering Section; 1971. p. 403-404 [in Japanese]
2. Wakabayashi M, Nakamura T, Katagihara A, Yogoyama H, Morisono T Experimental study on the elasto-plastic behavior of braces enclosed by precast concrete panels under horizontal cyclic loading - Parts 1 & 2. Summaries of technical papers of annual meeting, vol. 10. Architectural Institute of Japan, Structural Engineering Section; 1973. p. 1041-1044 [in Japanese]
3. Wakabayashi M, Nakamura T, Katagihara A, Yogoyama H, Morisono T Experimental study on the elasto-plastic behavior of braces enclosed by precast concrete panels under horizontal cyclic loading - Parts 1 & 2. Summaries of technical papers of annual meeting, vol. 6. Kinki Branch of the Architectural Institute of Japan; 1973. p. 121-128 [in Japanese]
4. Kimura K, Yoshioka K, Takeda T, Fukuya Z, Takemoto K Tests on braces encased by mortar in-filled steel tubes. Summaries of technical papers of annual meeting. Architectural Institute of Japan; 1976. p. 1041-10 42 [in Japanese]
5. Takeda T, Kimura K Experimental study on precast concrete shear walls - Part 6. Summaries of technical papers of annual meeting. Architectural Institute of Japan; 1979. p. 1677-1678 [in Japanese]
6. Mochizuki S, Murata Y, Andou N, Takahashi S Experimental study on buckling of unbonded braces under axial forces: Parts 1 and 2. Summaries of technical papers of annual meeting. Architectural Institute of Japan; 1979. p. 1623-1626 [in Japanese]
7. Mochizuki S, Murata Y, Andou N, Takahashi S Experimental study on buckling of unbonded braces under axial forces: Part 3. Summaries of technical papers of annual meeting. Architectural Institute of Japan; 1980. p. 1913-1914 [in Japanese]
8. Mochizuki S, Murata Y, Andou N, Takahashi S Experimental study on buckling of unbonded braces under axial forces: Part 4. Summaries of technical papers of annual meeting. Architectural Institute of Japan; 1982. p. 2263-2264 [in Japanese]
9. M. Fujimoto, A. Wada, E. Saeki, A. Watanabe, and Y. Hitomi A study on the unbonded brace encased in buckling-restraining concrete and steel tube Journal of Structural and Construction Engineering, AIJ 34B 1988 249 258 [in Japanese]
10. Watanabe A, Hitomi Y, Saeki E, Wada A, Fujimoto M Properties of brace encased in buckling-restraining concrete and steel tube. In: Proc. of ninth world conf. on earthquake eng, vol. IV. 1988. p. 719-724
11. Nagao T, Mikuriya K, Matsumoto Y, Takahashi S An experimental study on the elasto-plastic behavior of unbonded composite bracing (part 1-4). Summaries of technical papers of annual meeting, vol. II. Architectural Institute of Japan, Structural Engineering Section; 1988. p. 1329-1336 [in Japanese]
12. Nagao T, Mikuriya K, Takahashi S, Yuki S An experimental study on the elasto-plastic behavior of unbonded composite bracing (part 5-7). Summaries of technical papers of annual meeting, vol. II. Architectural Institute of Japan, Structural Engineering Section; 1989. p. 1501-1506 [in Japanese]
13. T. Nagao, and S. Takahashi A study on the elasto-plastic behavior of unbonded composite bracing (part 1 experiments on isolated members under cyclic loading) Journal of Structural and Construction Engineering, Architectural Institute of Japan 415 1990 105 115 [in Japanese]
14. T. Nagao, and S. Takahashi A study on the elasto-plastic behavior of unbonded composite bracing (part 2 analytical studies) Journal of Structural and Construction Engineering, Architectural Institute of Japan 422 1991 45 56 [in Japanese]
15. Nagao T, Sera S, Nakamura S, Ouchi H, Otani K, Fukutajima K A study on the RC encased H-section steel brace (part 1. general description, part 2 results and discussion). Summaries of technical papers of annual meeting, vol. II. Architectural Institute of Japan. Structural Engineering Section; 1992. p. 1773-1776 [in Japanese]
16. E. Saeki, Y. Maeda, H. Nakamura, M. Midorikawa, and A. Wada Experimental study on practical-scale unbonded braces Journal of Structural and Construction Engineering, Architectural Institute of Japan 476 1995 149 158 [in Japanese]
17. E. Saeki, K. Iwamatu, and A. Wada Analytical study by finite element method and comparison with experiment results concerning buckling-restrained unbonded braces Journal of Structural and Construction Engineering, Architectural Institute of Japan 484 1996 111 120 [in Japanese]
18. E. Saeki, Y. Maeda, K. Iwamatu, and A. Wada Analytical study on unbonded braces fixed in a frame Journal of Structural and Construction Engineering, Architectural Institute of Japan 489 1996 95 104 [in Japanese]
19. Mase S, Yabe Y Elasto-plastic damper using unbonded brace of low yield-point steel (part 2 low cycle fatigue test). Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, C1, Structural Engineering Section; 1995. p. 409-410 [in Japanese]
20. Inoue K, Chang P, Mine T, Hukuyama K, Inoue K Stiffening design of the precast concrete panels to prevent the steel flat braces from buckling. Annual technical papers of steel structures, vol. 1. 1993. p. 195-202
21. Suzuki N, Kono R, Higasibata Y, Sasaki T, Segawa T Experimental study on the H-section steel brace encased in RC or steel tube. Summaries of technical papers of annual meeting, vol. II. Architectural Institute of Japan, C, Structural Engineering Section; 1994. p. 1621-1622 [in Japanese]
22. Suzuki N, Kaneko H, Usami T, Sasaki T, Kouno R, Inoue K et al Mechanical behavior of H-shape braces with flexural buckling stiffeners (part 1. fundamental characteristics of stiffeners. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, C1, Structural Engineering Section; 1995. p. 393-394 [in Japanese]
23. S. Kuwahara, M. Tada, T. Yoneyama, and K. Imai A study on stiffening capacity of double-tube members Journal of Structural and Construction Engineering, Architectural Institute of Japan 445 1993 151 158 [in Japanese]
24. Tada M, Kuwahara S, Yoneyama T, Imai K Horizontally loading test of the steel frame braced with double-tube members. Annual technical papers of steel structures, vol. 1. 1993. p. 203-208 [in Japanese]
25. Manabe N, Simokawa H, Kamiya M, Morino S, Kawaguchi J Elasto-plastic behavior of flat-bar brace stiffened by square steel tube. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, C1, Structural Engineering Section; 1996. p. 783-784 [in Japanese]
26. Kamiya M, Simokawa H, Morino S, Kawaguchi J, Manabe N, Itoh S et al Elasto-plastic behavior of flat-bar brace stiffened by square steel tube. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, C1, Structural Engineering Section; 1997. p. 789-792 [in Japanese]
27. Kamiya M, Simokawa H, Morino S, Kawaguchi J, Manabe N, Itoh S et al Elasto-plastic behavior of flat-bar brace stiffened by square steel tube. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, C1, Structural Engineering Section; 1998. p. 839-844 [in Japanese]
28. Shimizu T, Fujisawa K, Uemura K, Inoue K Design method to prevent buckling of low yield strength steel tube brace and fracturing of joints (part 1&2). Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, C1, Structural Engineering Section; 1997. p. 781-784 [in Japanese]
29. T. Usami, and H. Kaneko Strength of H-shaped brace constrained flexural buckling having unconstrained area at both ends: both ends simply supported Journal of Structural and Construction Engineering, Architectural Institute of Japan 542 2001 171 177 [in Japanese]
30. T. Usami, H. Kaneko, and T. Ono Strength of H-shaped brace constrained flexural buckling having unconstrained area at both ends: both ends fixed Journal of Structural and Construction Engineering, Architectural Institute of Japan 558 2002 211 218 [in Japanese]
31. Isoda K, Mase S, Terada T, Satake N Development of unbonded brace damper restrained by channel section steel. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, Structural Engineering Section; 2001. p. 663-668 [in Japanese]
32. Koetaka Y, Narihara H, Tsujita O The experimental Study on BRBs: Parts 3. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, Structural Engineering Section; 2000. p. 651-652 [in Japanese]
33. Narihara H, Tsujita O, Koetaka Y The experimental study on BRBs: Parts 1 and 2. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, Structural Engineering Section; 2000. p. 911-914 [in Japanese]
34. Tsai KC, Lai JW A study of BRB frames. Report No. CEER/R90-07, Center for Earthquake Engineering Research, National Taiwan University; 2001 [in Chinese]
35. Tsai KC, Huang YC Experimental responses of large scale BRB frames. Report No. CEER/R91-03, Center for Earthquake Engineering Research, National Taiwan University; 2002 [in Chinese]
36. Tsai KC, Weng CH Experimental responses of double-tube unbonded brace elements and connections. Report No. CEER/R91-02, Center for Earthquake Engineering Research, National Taiwan University; 2002 [in Chinese]
37. Tsai KC, Loh CH, Hwang YC, Weng CS Seismic retrofit of building structures with dampers in Taiwan. In: Proceedings of symposium on structural seismic retrofit based on base-isolation and structural control. 2003. p. 21-32
38. Tuchida T, Kobayashi M, Yokoyama M et al Mechanical behavior of steel braces with flexural buckling stiffeners: Parts 1 and 2. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, Structural Engineering Section. 1999. p. 835-838 [in Japanese]
39. Tsuchida T, Kobayashi M, Yokoyama M et al Mechanical behavior of steel braces with flexural buckling stiffeners: Parts 3 and 4. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, Structural Engineering Section; 2000. p. 907-910 [in Japanese]
40. Kobayashi T, Inada M, Imai K, Kinoshita R, Morita T, Haginoya M Study on tube-in-tube FLD member with inner stiffening tube under cyclic loading. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, Structural Engineering Section; 2001. p. 657-658 [in Japanese]
41. K. Inoue, S. Sawaizumi, Y. Higashibata, and K. Inoue Bracing design criteria of the reinforced concrete panel including unbonded steel diagonal braces Journal of Structural and Construction Engineering, Architectural Institute of Japan 432 1992 41 49 [in Japanese]
42. K. Inoue, S. Sawaizumi, Y. Higashibata, and K. Inoue Stiffening design at the edge of the reinforced concrete panel including unbonded steel diagonal braces Journal of Structural and Construction Engineering, Architectural Institute of Japan 443 1993 137 146 [in Japanese]
43. K. Inoue, S. Sawaizumi, and Y. Higashibata Stiffening requirements for unbonded braces encased in concrete panels Journal of Structural Engineering, ASCE 127 6 2001 712 719
44. Murakami E, Mitarai Y, Asayama N, Narihara H Experiment on retrofitting of exiting brace improved to unbonded brace. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, Structural Engineering Section; 1999. p. 843-844 [in Japanese]
45. Y. Maeda, Y. Nakata, M. Iwata, and A. Wada Fatigue properties of axial-yield type hysteresis dampers Journal of Structural and Construction Engineering, Architectural Institute of Japan 503 1998 109 115 [in Japanese]
46. Maeda Y, Nakamura H, Takeuchi T, Nakata Y, Iwata M, Wada A Fatigue properties of practical-scale unbonded braces: Parts 1 and 2. Summaries of technical papers of annual meeting, vol. III. Architectural Institute of Japan, Structural Engineering Section; 1999. p. 813-816 [in Japanese]
47. Y. Tani, and K. Kihara Fundamental study on steel buckling in steel concrete structures Journal of Structural and Construction Engineering, Architectural Institute of Japan 72 1962 1 6 [in Japanese]
48. Building Research Institute (BRI) of Japan Textbook on building structural technique standard (version 2001). Tokyo, Japan: Engineering Books Corp. 2001 [in Japanese]
49. International Conference of Building Officials (ICBO) Uniform Building Code 1997 ICBO Whittier (CA)
50. Building Center of Japan (BCJ) Report on new building technologies - approvals, applications and certification. Tokyo: BCJ; 2002 [in Japanese]