Compressive and wear behaviors of bulk nanostructured Al2024 alloy

Materials and Design

Volumn 31, Issue 2, 2010, Pages 663-669

  Jafari, M ^a   Enayati, M H ^a   Abbasi, M H ^a   Karimzadeh, F ^a  

^a ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Mechanical properties (E); Nano materials (A); Wear (E)

Indexed keywords

AL2024 ALLOY; APPLIED LOADS; AS-MILLED POWDERS; COARSE-GRAINED; HIGH ENERGY MILLING; HIGH HARDNESS; HOT PRESSING METHOD; INSTRON; LOW FRICTION COEFFICIENTS; MECHANICAL MILLING; MECHANICAL PROPERTIES (E); NANO MATERIALS (A); NANO-CRYSTALLINE STRUCTURES; NANO-STRUCTURED; NANOSTRUCTURED ALLOY; PIN ON DISK; RELATIVE DENSITY; SEM; UNIAXIAL COMPRESSION TESTS; WEAR (E); WEAR BEHAVIORS; WEAR DEBRIS; WEAR MECHANISMS; WEAR PROPERTIES; WEAR RATES; WORN SURFACE; XRD; YIELD STRENGTH;

COMPRESSION TESTING; COMPRESSIVE STRENGTH; DEBRIS; FRICTION; HARDNESS; HOT PRESSING; MECHANICAL ALLOYING; MECHANICAL PROPERTIES; MILLING (MACHINING); POWDERS; SCANNING ELECTRON MICROSCOPY; STRAIN RATE; TRIBOLOGY; WEAR OF MATERIALS; WEAR RESISTANCE; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

NANOCRYSTALLINE ALLOYS;

EID: 70350059127     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.08.020     Document Type: Article

References (32)

1. De Castro C.L., and Mitchell B.S. Crystal growth kinetics of nanocrystalline aluminum prepared by mechanical attrition in nylon media. Mater Sci Eng A 396 (2005) 124-128
2. Keblinski P., Phillpot S.R., Wolf D., and Gleiter H. Amorphous structure of grain boundaries and grain junctions in nanocrystalline silicon by molecular-dynamics simulation. Acta Mater 45 (1997) 987-998
3. Guduru R.K., Murty K.L., Youssef K.M., Scattergood R.O., and Koch C.C. Mechanical behavior of nanocrystalline copper. Mater Sci Eng A 463 (2007) 14-21
4. Bonetti E., Pasquini L., and Sampaolesi E. The influence of grain size on the mechanical properties of nanocrystalline aluminium. Nano Struct Mater 9 (1997) 611-614
5. Khan A.S., Suh Y.S., Chen X., Takacs L., and Zhang H. Nanocrystalline aluminum and iron: mechanical behavior at quasistatic and high strain rates, and constitutive modeling. Int J Plasticity 22 (2006) 195-209
6. Khan A.S., Farrokh B., and Takacs L. Effect of grain refinement on mechanical properties of ball-milled bulk aluminum. Mater Sci Eng A 489 (2008) 77-84
7. Dao M., Lu L., Asaro R.J., De Hosson J.T.M., and Ma E. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals. Acta Mater 55 (2007) 4041-4065
8. Lv X.R., Wang S.G., Liu Y., Long K., Li S., and Zhang Z.D. Effect of nanocrystallization on tribological behaviors of ingot iron. Wear 264 (2008) 535-541
9. Han Z., Lu L., and Lu K. Dry sliding tribological behavior of nanocrystalline and conventional polycrystalline copper. Tribol Lett 21 (2006) 47-52
10. Iglesias P., Bermudez M.D., Moscoso W., Rao B.C., Shankar M.R., and Chandrasekar S. Friction and wear of nanostructured metals created by large strain extrusion machining. Wear 263 (2007) 636-642
11. Williamson G.K., and Hall W.H. X-ray line broadening from filed aluminium and wolfram. Acta Metall 1 (1953) 22-31
12. Jafari M., Enayati M.H., Abbasi M.H., and Karimzadeh F. Thermal stability and structural changes during heat treatment of nanostructured Al2024 alloy. J Alloys Compd 478 (2009) 260-264
13. Tavoosi M., Enayati M.H., and Karimzadeh F. Softening behaviour of nanostructured Al-14 wt%Zn alloy during mechanical alloying. J Alloys Compd 464 (2008) 107-110
14. Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci 46 (2001) 1-184
15. Shewmon P.G. Transformations in metals. 1st ed. (1969), McGraw-Hill, New York
16. Wang Z.B., Tao N.R., Li S., Wang W., Liu G., Lu J., et al. Effect of surface nanocrystallization on friction and wear properties in low carbon steel. Mater Sci Eng A 352 (2003) 144-149
17. Porter D.A., and Easterling K.E. Phase transformations in metals and alloys (1981), Van Nostrand Reinhold, UK
18. Dieter G.E. Mechanical metallurgy. 4th ed. (1988), MaGraw-Hill, New York
19. Rodríguez-Baracaldo R., Benito J.A., Caro J., Cabrera J.M., and Prado J.M. Strain rate sensitivity of nanocrystalline and ultrafine-grained steel obtained by mechanical attrition. Mater Sci Eng A 485 (2008) 325-333
20. Choi H.J., Kwon G.B., Lee G.Y., and Bae D.H. Reinforcement with carbon nanotubes in aluminum matrix composites. Scripta Mater 59 (2008) 360-363
21. Farrokh B., and Khan A.S. Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: synthesis, experiment, and constitutive modeling. Int J Plast 25 (2009) 715-732
22. Youssef K.M., Scattergood R.O., Murty K.L., Horton J.A., and Koch C.C. Ultrahigh strength and high ductility of bulk nanocrystalline copper. Appl Phys Lett 87 (2005) 1-3
23. Cheng S., Ma E., Wang Y.M., Kecskes L.J., Youssef K.M., Koch C.C., et al. Tensile properties of in situ consolidated nanocrystalline Cu. Acta Mater 53 (2005) 1521-1533
24. Sun P.L., Cerreta E.K., Gray G.T., and Bingert J.F. The effect of grain size, strain rate, and temperature on the mechanical behavior of commercial purity aluminum. Metall Mater Trans A 37A (2006) 2983-2994
25. Hayes R.W., Witkin D., Zhou F., and Lavernia E.J. Deformation and activation volumes of cryomilled ultrafine-grained aluminum. Acta Mater 52 (2004) 4259-4271
26. Schwaiger R., Moser B., Dao M., Chollacoop N., and Suresh S. Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel. Acta Mater 51 (2003) 5159-5172
27. Wang Y.M., Hamza A.V., and Ma E. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni. Acta Mater 54 (2006) 2715-2726
28. Chang Y., Wang D., Chang C., and Wu W.T. Tribological analysis of nano-composite diamond-like carbon films deposited by unbalanced magnetron sputtering. Surf Coat Technol 184 (2004) 349-355
29. 2 composite. Wear 265 (2008) 1606-1618
30. Shah K.B., Kumar S., and Dwivedi D.K. Aging temperature and abrasive wear behavior of cast Al-(4%, 12%, 20%) Si-0.3% Mg alloys. Mater Des 28 (2007) 1968-1974
31. 2 particulate composites. Wear 265 (2008) 134-142
32. In: Suh N.P. (Ed). Tribophysics (1986), Prentice-Hall