On the stiffness matrix of the intervertebral joint: Application to total disk replacement

Journal of Biomechanical Engineering

Volumn 131, Issue 8, 2009, Pages

  O'Reilly, Oliver M ^a   Metzger, Melodie F ^b   Buckley, Jenni M ^b   Moody, David A ^a   Lotz, Jeffrey C ^b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Disk arthroplasty; Intervertebral disk; Spine kinematics; Stiffness matrix

Indexed keywords

ARTHROPLASTIES; DISK REPLACEMENT; ENERGY LOSS; EULER ANGLES; FINITE ROTATIONS; INTERVERTEBRAL DISK; INTERVERTEBRAL JOINTS; MATRIX; MOTION SEGMENTS; POROVISCOELASTIC; SPINE KINEMATICS; SUPPORT STRUCTURES;

CARTILAGE; DISKS (STRUCTURAL COMPONENTS); ENERGY DISSIPATION; JOINT PROSTHESES; KINEMATICS; ROTATION; STIFFNESS;

STIFFNESS MATRIX;

ARTICLE; CONTROLLED STUDY; INTERVERTEBRAL ARTICULATION; INTERVERTEBRAL DISKECTOMY; KINETICS; MECHANICAL STRESS; MOTION; RIGIDITY; ROTATION; BIOLOGICAL MODEL; COMPUTER SIMULATION; HUMAN; INTERVERTEBRAL DISK; JOINT PROSTHESIS; PATHOPHYSIOLOGY; TORQUE; WEIGHT BEARING; YOUNG MODULUS; ZYGAPOPHYSEAL JOINT;

COMPUTER SIMULATION; ELASTIC MODULUS; HUMANS; INTERVERTEBRAL DISK; JOINT PROSTHESIS; MODELS, BIOLOGICAL; TORQUE; WEIGHT-BEARING; ZYGAPOPHYSEAL JOINT;

EID: 70349758605     PISSN: 01480731     EISSN: 15288951     Source Type: Journal    
DOI: 10.1115/1.3148195     Document Type: Article

References (42)

1. Bertagnoli, R., and Kumar, S., 2002, "Indications for Full Prosthetic Disc Arthroplasty: A Correlation of Clinical Outcomes Against a Variety of Indications," Eur. Spine J., 11(2), pp. S131-S136. (Pubitemid 35244944)
2. Cunningham, B. W., Dmitriev, A. E., Hu, N., and McAfee, P. C., 2003, "General Principles of Total Disc Replacement Arthroplasty: Seventeen Cases in a Nonhuman Primate Model," Spine, 28, pp. S118-S124.
3. de Kleuver, M., Oner, F. C., and Jacobs, W. C., 2003, "Total Disc Replacement for Chronic Low Back Pain: Background and a Systematic Review of the Literature," Eur. Spine J., 12(2), pp. 108-116.
4. Punt, I. M., Visser, V. M., van Rhijn, L. W., Kurtz, S. M., Antonis, J., Schurink, G. W. H., and van Ooij, A., 2008, "Complications and Reoperations of the SB Charité Lumbar Disc Prosthesis: Experience in 75 Patients," Eur. Spine J., 17(1), pp. 36-43.
5. Panjabi, M. M., Oxland, T., Yamamoto, I., and Crisco, J., 1994, "Mechanical Behavior of the Human Lumbar and Lumbosacral Spine Shown by Three-Dimensional Load Displacement Curves," J. Bone Jt. Surg., Am. Vol., 76(3), pp. 413-424.
6. Mayer, T. G., Kondraske, G., Beals, S. B., and Gatchel, R. J., 1997, "Spinal Range of Motion. Accuracy and Sources of Error With Inclinometric Measurement," Spine, 22(17), pp. 1976-1984. (Pubitemid 28069125)
7. Cunningham, B. W., Kotani, Y., McNulty, P. S., Cappuccino, A., and McAfee, P. C., 1997, "The Effect of Spinal Destabilization and Instrumentation on Lumbar Intradiscal Pressure: An In Vitro Biomechanical Analysis," Spine, 22(22), pp. 2655-2663.
8. Panjabi, M. M., 1992, "The Stabilizing System of the Spine. Part II. Neutral Zone and Instability Hypothesis," J. Spinal Disord., 5(4), pp. 390-397.
9. M. Mansour, S. Spiering, C. Lee, H. Dathe, A. K. Kalscheuer, D. Kubein-Meesenburg, and H. Nägerl, 2004, "Evidence for IHA Migration During Axial Rotation of a Lumbar Spine Segment by Using a Novel High-Resolution 6D Kinematic Tracking System," J. Biomech., 37, pp. 583-592.
10. Spoor, C., 1984, "Explanation, Verification and Application of Helical-Axis Error Propagation Formulae," Hum. Mov. Sci., 3(1-2), pp. 95-117.
11. Adams, D. S., McNally, M. A., and Dolan, P., 1996, "'Stress' Distributions Inside Intervertebral Discs: The Effects of Age and Degeneration," J. Bone Jt. Surg., Am. Vol., 78(6), pp. 965-972. (Pubitemid 26392131)
12. Rousseau, M. A., Bradford, D. S., Bertagnoli, R., Hu, S. S., and Lotz, J. C., 2006, "Disc Arthroplasty Design Influences Intervertebral Kinematics and Facet Forces," Eur. Spine J., 6(3), pp. 258-266.
13. Sharma, M., Langrana, N. A., and Rodriguez, J., 1995, "Role of Ligaments and Facets in Lumbar Spinal Stability," Spine, 20(8), pp. 887-900.
14. Panjabi, M. M., Brand, R. A., Jr., and White, A. A., 1976, "Three-Dimensional Flexibility and Stiffness Properties of the Human Thoracic Spine," J. Biomech., 9(4), pp. 185-192.
15. Gardner-Morse, M. G., and Stokes, I. A., 2003, "Physiological Axial Compressive Preloads Increase Motion Segment Stiffness, Linearity and Hysteresis in All Six Degrees of Freedom for Small Displacements About the Neutral Posture," J. Orthop. Res., 21(3), pp. 547-552.
16. Gardner-Morse, M. G., and Stokes, I. A. F., 2004, "Structural Behavior of the Human Lumbar Spinal Motion Segments," J. Biomech., 37(2), pp. 205-212.
17. Stokes, I. A., Gardner-Morse, M. G., Churchill, D., and Laible, J. P., 2002, "Measurement of a Spinal Motion Segment Stiffness Matrix," J. Biomech., 35(4), pp. 517-521.
18. Stokes, I. A. F., and Iatridis, J. C., 2005, Basic Orthopaedic Biomechanics and Mechano-Biology, 3rd ed., C. Mow and R. Huiskes, eds., Lippincott Williams & Wilkins, Philadelphia, pp. 529-561.
19. McGill, S., and Norman, R., 1987, "Effects of an Anatomically Detailed Erector Spinae Model on L4/L5 Disc Compression and Shear," J. Biomech., 20(6), pp. 591-600. (Pubitemid 17111946)
20. Cholewicki, J., and McGill, S. M., 1996, "Mechanical Stability of the In Vivo Lumbar Spine: Implications for Injury and Chronic Low Back Pain," Clin. Biomech. (Bristol, Avon), 11(1), pp. 1-15.
21. Howarth, S. J., Allison, A. E., Grenier, S. G., Cholewicki, J., and McGill, S. M., 2004, "On the Implications of Interpreting the Stability Index: A Spine Example," J. Biomech., 37(8), pp. 1147-1154. (Pubitemid 38798368)
22. McGill, S. M., Seguim, J., and Bennett, G., 1994, "Passive Stiffness of the Lumbar Torso About the Flexion-Extension, Lateral Bend and Axial Twist Axes: The Effect of Belt Wearing and Breath Holding," Spine, 19(6), pp. 696-704.
23. O'Reilly, O. M., 2007, "The Dual Euler Basis: Constraints, Potentials, and Lagrange's Equations in Rigid Body Dynamics," ASME J. Appl. Mech., 74(2), pp. 256-258.
24. O'Reilly, O. M., and Srinivasa, A. R., 2002, "On Potential Energies and Constraints in the Dynamics of Rigid Bodies and Particles," Math. Probl. Eng., 8(3), pp. 169-180.
25. Howard, S., Žefran, M., and Kumar, V., 1998, "On the 6 x 6 Cartesian Stiffness Matrix for Three-Dimensional Motions," Mech. Mach. Theory, 33(4), pp. 389-408.
26. Žefran, M., and Kumar, V., 2002, "A Geometrical Approach to the Study of the Cartesian Stiffness Matrix," ASME J. Mech. Des., 124(1), pp. 30-38.
27. O'Reilly, O. M., 2008, Intermediate Engineering Dynamics: A Unified Approach to Newton-Euler and Lagrangian Mechanics, Cambridge University Press, New York.
28. Crawford, N. R., Yamaguchi, G. T., and Dickman, C. A., 1996, "Methods for Determining Spinal Flexion/Extension, Lateral Bending, and Axial Rotation From Marker Coordinate Data: Analysis and Refinement," Hum. Mov. Sci., 15(1), pp. 55-78.
29. Rousseau, M. A., Bradford, D. S., Hadi, T. M., Pedersen, K. L., and Lotz, J. C., 2006, "The Instant Axis of Rotation Influences Facet Forces at L5/S1 During Flexion/Extension and Lateral Bending," Eur. Spine J., 15(3), pp. 299-307.
30. Adams, M., Hutton, W., and Stott, J., 1980, "The Resistance to Flexion of the Lumbar Intervertebral Joint," Spine, 5, pp. 245-253. (Pubitemid 10005782)
31. Duval-Beaupere, G., and Robain, G., 1987, "Visualization on Full Spine Radiographs of the Anatomical Connections of the Centers of the Segmental Body Mass Supported by Each Vertebra and Measured In Vivo," Int. Orthop., 11, pp. 261-269.
32. McGlashen, K., Miller, J., Schultz, A., and Andersson, G., 1987, "Load Displacement Behavior of the Human Lumbo-Sacral Joint," J. Orthop. Res., 5(4), pp. 488-496.
33. White, A. A., III, and Panjabi, M. M., 1990, Clinical Biomechanics of the Spine, 2nd ed., Lippincott Williams & Wilkins, Philadelphia.
34. Dorst, L., 2005, "First Order Error Propagation of the Procrustes Method for 3D Attitude Estimation," IEEE Trans. Pattern Anal. Mach. Intell., 27(2), pp. 221-229. (Pubitemid 40377315)
35. Shuster, M. D., and Oh, S. D., 1981, "Three-Axis Attitude Determination From Vector Observations," J. Guidance, 4(1), pp. 70-77.
36. Spoor, C. W., and Veldpaus, F. E., 1980, "Rigid Body Motion Calculated From Spatial Co-Ordinates of Markers," J. Biomech., 13(4), pp. 391-393.
37. Woltring, H. J., Huiskes, R., de Lange, A., and Veldpaus, F. E., 1985, "Finite Centroid and Helical Axis Estimation From Noisy Landmark Measurements in the Study of Human Joint Kinematics," J. Biomech., 18(5), pp. 379-389.
38. Shuster, M. D., 1993, "A Survey of Attitude Representations," J. Astronaut. Sci., 41(4), pp. 439-517.
39. Casey, J., and Lam, V. C., 1986, "On the Relative Angular Velocity Tensor," ASME J. Mech., Transm., Autom. Des., 108, pp. 399-400.
40. Antman, S. S., 1972, "Solution to Problem 71-24: 'Angular Velocity and Moment Potential for a Rigid Body,' by J. G. Simmonds," SIAM Rev., 14, pp. 649-652.
41. Simmonds, J. G., 1984, "Moment Potentials," Am. J. Phys., 52(9), pp. 851-852.
42. Simmonds, J. G., 1985, "Moment Potentials [Am. J. Phys. 52, 851-857 (1984)]," Am. J. Phys., 53, p. 277(E).