Two new multiaxial HCF criteria based on virtual stress amplitude and virtual mean stress concepts for complicated geometries and random nonproportional loading conditions

Journal of Engineering Materials and Technology

Volumn 131, Issue 3, 2009, Pages 0310141-03101413

  Shariyat, M ^a  

^a K N TOOSI UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Experimental results; High cycle fatigue; Instantaneous amplitude; Integral approach; Life prediction; Nonproportional loading; Random loading

Indexed keywords

FATIGUE OF MATERIALS;

EXPERIMENTAL RESULTS; HIGH CYCLE FATIGUE; INSTANTANEOUS AMPLITUDE; INTEGRAL APPROACH; LIFE PREDICTIONS; NONPROPORTIONAL LOADING; RANDOM LOADING;

STRESS ANALYSIS;

EID: 70349285919     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.3086387     Document Type: Article

References (61)

1. Fatemi, A., and Yang, L., 1998, "Cumulative Fatigue Damage and Life Prediction Theories: A Survey of the State of the Art for Homogeneous Materials", Int. J. Fatigue, 20 (1), pp. 9-34.
2. Papadopoulos, I. V., Davoli, P., Gorla, C., Filippini, M., and Bernasconi, A., 1997, "A Comparative Study of Multiaxial High-Cycle Fatigue Criteria for Metals", Int. J. Fatigue, 19 (3), pp. 219-235.
3. Papadopoulos, I. V., 1996, "Invariant Formulation of a Gradient Dependent Multiaxial High-Cycle Fatigue Criterion", Eng. Fract. Mech., 55 (4), pp. 513-528.
4. Cristofori, A., Susmel, L., and Tovo, R., 2008, "A Stress Invariant Based Criterion to Estimate Fatigue Damage Under Multiaxial Loading", Int. J. Fatigue, 30, pp. 1646-1658.
5. Sines, G., 1959, "Behavior of Metals Under Complex Stresses", Metal Fatigue, G. Sines and J. L. Waisman, eds., McGraw-Hill, New York, pp. 145-169.
6. Papadopoulos, I. V., 1994, "A New Criterion of Fatigue Strength for Out-of-Phase Bending and Torsion of Hard Metals", Int. J. Fatigue, 16, pp. 377-384.
7. Papadopoulos, I. V., 2001, "Long Life Fatigue Under Multiaxial Loading", Int. J. Fatigue, 23 (10), pp. 839-849.
8. Findley, W. N., 1959, "A Theory for Effect of Mean Stress on Fatigue of Metals Under Combined Torsion and Axial Load or Bending", ASME J. Eng. Ind., 81 (4), pp. 301-306.
9. Matake, T., 1977, "An Explanation of Fatigue Limit Under Combined Stress", Bull. JSME, 20, pp. 257-263.
10. McDiarmid, D. L., 1987, "Fatigue Under Out-of-Phase Bending and Torsion", Fatigue Fract. Eng. Mater. Struct., 9, pp. 457-475.
11. McDiarmid, D. L., 1991, "A General Criterion for High Cycle Multiaxial Fatigue Failure", Fatigue Fract. Eng. Mater. Struct., 14 (4), pp. 429-453.
12. McDiarmid, D. L., 1994, "A Shear Stress Based Critical-Plane Criterion of Multiaxial Fatigue Failure for Design and Life Prediction", Fatigue Fract. Eng. Mater. Struct., 17, pp. 1475-1484.
13. Dang Van, K., Griveau, B., and Message, O., 1989, "On a New Multiaxial Fatigue Limit Criterion: Theory and Application", Biaxial and Multiaxial Fatigue (European Group on Fracture), Mechanical Engineering, London, EGF Publication No. 3, pp. 479-496.
14. Dang Van, K., 1993, "Marco-Micro Approach in High-Cycle Multiaxial Fatigue", Advances in Multiaxial Fatigue, D. L. McDowell and R. Ellis, eds., American Society for Testing and Materials, West Conshohocken, PA, ASTM STP 1191, pp. 120-130.
15. Carpinteri, A., Brighenti, R., and Spagnoli, A., 2000, "A Fracture Plane Approach in Multiaxial High-Cycle Fatigue of Metals", Fatigue Fract. Eng. Mater. Struct., 23 (4), pp. 355-364.
16. Carpinteri, A., and Spagnoli, A., 2001, "Multiaxial High-Cycle Fatigue Criterion for Hard Metals", Int. J. Fatigue, 23, pp. 135-145.
17. Spagnoli, A., 2001, "A New High-Cycle Fatigue Criterion Applied to Out-of-Phase Biaxial Stress State", Int. J. Mech. Sci., 43, pp. 2581-95.
18. Carpinteri, A., Spagnoli, A., and Vantadori, S., 2003, "A Multiaxial Fatigue Criterion for Random Loading", Fatigue Fract. Eng. Mater. Struct., 26, pp. 515-522.
19. Dattoma, V., Giancane, S., Nobile, R., and Panella, F. W., 2006, "Fatigue Life Prediction Under Variable Loading Based on a New Non-Linear Continuum Damage Mechanics Model", Int. J. Fatigue, 28, pp. 89-95.
20. Ottosen, N. S., Stenstrom, R., and Ristinma, M., 2008, "Continuum Approach to High-Cycle Fatigue Modeling", Int. J. Fatigue, 30, pp. 996-1006.
21. Bernasconi, A., and Papadopoulos, I. V., 2005, "Efficiency of Algorithms for Shear Stress Amplitude Calculation in Critical Plane Class Fatigue Criteria", Comput. Mater. Sci., 34, pp. 355-368.
22. McDiarmid, D. L., 1985, "Fatigue Under Out-of-Phase Biaxial Stresses of Different Frequencies", Multiaxial Fatigue, K. J. Miller and M. W. Brown, eds., ASTM, Philadelphia, PA, ASTM STP 853, pp. 606-621.
23. McDiarmid, D. L., 1991, "Mean Stress Effects in Biaxial Fatigue Where the Stresses Are Out-of-Phase and at Different Frequencies", Fatigue Under Biaxial and Multiaxial Loadings, K. Kussmaul, D. L. McDiarmid, and D. Socie, eds., Mechanical Engineering, London, ESIS 10, pp. 321-335.
24. Dietmann, H., Bhongbhibhat, T., and Schmid, A., 1991, "Multiaxial Fatigue Behavior of Steels Under In-Phase and Out-of-Phase Loading, Including Different Wave Forms and Frequencies", Fatigue Under Biaxial and Multiaxial Loadings, K. Kussmaul, D. L. McDiarmid, and D. Socie, eds., Mechanical Engineering, London, ESIS 10, pp. 449-464.
25. Liu, J., and Zenner, H., 2003, "Fatigue Limit of Ductile Metals Under Multiaxial Loading", Biaxial/Multiaxial Fatigue and Fracture, A. Carpinteri, M. de Freitas, and A. Spagnoli, eds., Elsevier, Amsterdam, ESIS 31, pp. 147-163.
26. Bernasconi, A., Foletti, S., and Papadopoulos, I. V., 2008, "A Study on Combined Torsion and Axial Load Fatigue Limit Tests With Stresses of Different Frequencies", Int. J. Fatigue, 30 (8), pp. 1430-1440.
27. Zenner, H., Simburger, A., and Liu, J., 2000, "On the Fatigue Limit of Ductile Metals Under Complex Multiaxial Loading", Int. J. Fatigue, 22, pp. 137-145.
28. Lagoda, T., Macha, E., and Pawliczek, R., 2001, "'The Influence of the Mean Stress on Fatigue Life of 10HNAP Steel Under Random Loading", Int. J. Fatigue, 23, pp. 283-291.
29. Banvillet, t,., 2004, "Fatigue Life Under Non-Gaussian Random Loading From Various Models", Int. J. Fatigue, 26, pp. 349-363.
30. Benasciutti, D., and Tovo, R., 2006, "Fatigue Life Assessment in Non-Gaussian Random Loadings", Int. J. Fatigue, 28, pp. 733-746.
31. Kang, J. Y., Choi, B. I., Lee, H. J., Kim, J. S., and Kim, K. J., 2006, "Neural Network Application in Fatigue Damage Analysis Under Multiaxial Random Loadings", Int. J. Fatigue, 28, pp. 132-140.
32. Macha, E., and Sonsino, C. M., 1999, "Energy Criteria of Multiaxial Fatigue Failure", Fatigue Fract. Eng. Mater. Struct., 22, pp. 1053-1070.
33. Lagoda, T., and Macha, E., 2000, "Generalization of Energy-Based Multiaxial Fatigue Criteria to Random Loading", Multiaxial Fatigue and Deformation Testing and Prediction, S. Kalluri and P. J. Bonacuse, eds., American Society for Testing and Materials, West Conshohocken, PA, ASTM STP 1387, pp. 173-190.
34. Lagoda, T., 2001, "Energy Models for Fatigue Life Estimation Under Uniaxial Random Loading. Part I: The Model Elaboration", Int. J. Fatigue, 23, pp. 467-480. (Pubitemid 32335395)
35. Li, B., and De Freitas, M., 2002, "A Procedure for Fast Evaluation of High-Cycle Fatigue Under Multiaxial Random Loading", ASME J. Mech. Des., 124, pp. 558-563.
36. Macha, E., and Nieslony, A., 2005, "Random Multiaxial Fatigue Loading", Advances in Fatigue, Fracture and Damage Assessment of Materials, A. Varvani-Farahani, ed., WIT, Southampton, Chap. 8, pp. 213-242.
37. Lagoda, T., Macha, E., and Nieslony, A., 2005, "Fatigue Life Calculation by Means of the Cycle Counting and Spectral Methods Under Multiaxial Random Loading", Fatigue Fract. Eng. Mater. Struct., 28, pp. 409-420.
38. Ahmadi, A., and Zenner, H., 2006, "Lifetime Simulation Under Multiaxial Random Loading With Regard to the Microcrack Growth", Int. J. Fatigue, 28, pp. 954-962. (Pubitemid 43795940)
39. Marciniak, Z., Rozumek, D., and Macha, E., 2008, "Fatigue Lives of 18G2A and 10HNAP Steels Under Variable Amplitude and Random Non-Proportional Bending With Torsion Loading", Int. J. Fatigue, 30, pp. 800-813.
40. Pitoiset, X., Rychlik, I., and Preumonti, A., 2001, "Spectral Methods to Estimate Local Multiaxial Fatigue Failure for Structures Undergoing Random Vibrations", Fatigue Fract. Eng. Mater. Struct., 24, pp. 715-727.
41. Benasciutti, D., and Cristofori, A., 2008, "A Frequency-Domain Formulation of MCE Method for Multi-Axial Random Loadings", Fatigue Fract. Eng. Mater. Struct., 31, pp. 937-948.
42. Liu, Y., Stratman, B., and Mahadevan, S., 2006, "Fatigue Crack Initiation Life Prediction of Railroad Wheels", Int. J. Fatigue, 28, pp. 747-756.
43. Liu, Y., and Mahadevan, S., 2007, "A Unified Multiaxial Fatigue Damage Model for Isotropic and Anisotropic Materials", Int. J. Fatigue, 29, pp. 347-359.
44. Shariyat, M., 2008, "A Fatigue Model Developed by Modification of Gough's Theory, for Random Non-Proportional Loading Conditions and Three-Dimensional Stress Fields", Int. J. Fatigue, 30, pp. 1248-1258.
45. Brown, M. W., and Miller, K. J., 1973, "A Theory for Fatigue Failure Under Multiaxial Stress-Strain Conditions", Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 187 (65), pp. 745-55.
46. Karolczuk, A., and Macha, E., 2008, "Selection of the Critical Plane Orientation in Two-Parameter Multiaxial Fatigue Failure Criterion Under Combined Bending and Torsion", Eng. Fract. Mech., 75, pp. 389-403.
47. Davoli, P., Bernasconi, A., Filippini, M., Foletti, S., and Papadopoulos, I. V., 2003, "Independence of the Torsional Fatigue Limit Upon a Mean Shear Stress", Int. J. Fatigue, 25, pp. 471-480.
48. Lee, Y. L., Pan, J., Hathaway, R., and Barkey, M., 2005, Fatigue Testing and Analysis: Theory and Practice, Elsevier, Amsterdam.
49. Haupt, P., 2002, Continuum Mechanics and Theory of Materials, Springer, New York.
50. Wu, H. C., 2005, Continuum Mechanics and Plasticity, Chapman and Hall, London.
51. Cristescu, N. D., 2007, Dynamic Plasticity, World Scientific, Singapore.
52. Socie, D., and Marquis, G., 2000, Multiaxial Fatigue, 1st ed., Society of Automotive Engineers SAE International, Philadelphia, PA.
53. Susmel, L., Tovo, R., and Lazzarin, P., 2005, "The Mean Stress Effect on the High-Cycle Fatigue Strength From a Multiaxial Fatigue Point of View", Int. J. Fatigue, 27, pp. 928-943.
54. Park, J., and Nelson, D., 2000, "Evaluation of an Energy-Based Approach and a Critical Plane Approach for Predicting Constant Amplitude Multiaxial Fatigue Life", Int. J. Fatigue, 22, pp. 23-39.
55. Morel, F., 2000, "A Critical Plane Approach for Life Prediction of High Cycle Fatigue Under Multiaxial Variable Amplitude Loading", Int. J. Fatigue, 22, pp. 101-119.
56. Li, B., Santos, J. L. T., and De Feritas, M., 2001, "A Computerized Procedure for Long-Life Fatigue Assessment Under Complex Multiaxial Loading", Fatigue Fract. Eng. Mater. Struct., 24, pp. 165-177.
57. Liu, Y., and Mahadevan, B., 2005, "Multiaxial High-Cycle Fatigue Criterion and Life Prediction for Metals", Int. J. Fatigue, 27, pp. 790-800.
58. Carpinteri, A., Spagnoli, A., Vantadori, S., and Viappiani, D., 2008, "A Multiaxial Criterion for Notch High-Cycle Fatigue Using a Critical-Point Method", Eng. Fract. Mech., 75, pp. 1864-1874.
59. Wright, D. H., 1993, Testing Automotive Materials and Components, McGraw-Hill, New York.
60. Collins, J. A., 2002, Mechanical Design of Machine Elements and Machines: A Failure Prevention Perspective, Wiley, New York.
61. Shariyat, M., 2006, Automotive Body: Design and Analysis, KNT University Press, Tehran, Iran.