Energy criteria of multiaxial fatigue failure

Fatigue and Fracture of Engineering Materials and Structures

Volumn 22, Issue 12, 1999, Pages 1053-1070

  Macha, E ^a   Sonsino, C M ^a,b  

^a OPOLE UNIVERSITY OF TECHNOLOGY   (Poland)

^b Fraunhofer Institute for Durability   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTICITY; FAILURE ANALYSIS; HYSTERESIS; STRAIN;

MULTIAXIAL FATIGUE; STRAIN ENERGY DENSITY;

FATIGUE OF MATERIALS;

EID: 0033310823     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1046/j.1460-2695.1999.00220.x     Document Type: Article

References (58)

1. R. M. Andrews and M. W. Brown (1989) Elevated temperature out-of-phasc fatigue behaviour of a stainless steel. In: Biaxial, Multiaxial Fatigue (Edited by M. W. Brown and K. J. Miller), EGF (ESIS) Publication 3, MEP, London, pp. 641-658.
2. S. Curioni and A. Freddi (1991) Energy-based torsional low-cycle fatigue analysis. In: Fatigue under Biaxial, Multiaxial Loading (Edited by K. F. Kussmaul, D. L. McDiarmid and D. F. Socie), ESIS Publication 10, MEP, London, pp. 23-33.
3. F. Ellyin (1974) A criterion for fatigue under multiaxial states of stress. In: Mechanics Research Communications, Vol. 1, No. 4, pp. 219-224.
4. B. N. Leis (1977) An energy-based fatigue and creep-fatigue damage parameter. Trans. ASME JPVT 99, 524-533.
5. F. Ellyin (1989) Cyclic strain energy as a criterion for multiaxial fatigue failure. In: Biaxial, Multiaxial Fatigue (Edited by K. J. Miller and M. W. Brown), EGF (ESIS) Publication 3, MEP, London, pp. 571-583.
6. F. Ellyin and K. Golos (1988) Multiaxial fatigue damage criterion. Trans. ASME JEMT 110, 63-68.
7. Y. S. Garud (1981) A new approach to the evaluation of fatigue under multiaxial loadings. Trans. ASME JEMT 103, 118-125.
8. G. Glinka, G. Shen and A. Plumtree (1995) A multiaxial fatigue strain energy density parameter related to the critical fracture plane. Fatigue Fract. Engng Mater. Struct. 18(1), 37-64.
9. K. Golos (1988) An energy based multiaxial fatigue criterion. In: Engineering Transactions, Vol. 36, No. 1, Polish Academy of Sciences, pp. 55-63.
10. K. Golos and Z. Osinski (1994) Multiaxial fatigue criterion under proportional loading including mean strain effect. In: Fourth International Conference on Biaxial/Multiaxial Fatigue, St Germain en Laye, France, 31 May-3 June 1994, Vol. II, pp. 303-315.
11. D. Lefebvre, K. W. Neale and F. Ellyin (1988) A criterion for low-cycle fatigue failure under biaxial states of stress. Trans. ASME JEMT 103, 1-6.
12. K. C. Liu (1993) A method based on virtual strain-energy parameters for multiaxial fatigue life prediction. In: Advances in Multiaxial Fatigue (Edited by D. L. McDowell and R. Ellis), ASTM STP 1191, American Society for Testing and Materials, Philadelphia, pp. 67-84.
13. K. Macha (1979) Mathematical models of fatigue life of the materials under random complex stress state. Scientific Papers of Inst. of Materials Science and Technical Mechanics. Technical University of Wrocλaw, no. 41, Series: Monographs no. 13, Wrocław, 99 pages (in Polish).
14. A. Nitta, T. Ogata and K. Kuwabara (1989) Fracture mechanisms and life assessment under high-strain biaxial cyclic loading of type 304 stainless steel. Fatigue Fract. Engng Mater: Struct. 12(2), 77-92.
15. W. N. Findley (1953) Combined stress fatigue strength of 78S-T61 aluminium alloy with superimposed mean stresses and corrections for yielding. NACA-TN-2924, Washington, 90 pages.
16. F. Rotvel (1970) Biaxial fatigue tests with zero mean stresses using tubular specimens. Int. J. Mech. Sci. 12(7), 597-613.
17. G. Sines (1955) Failure of materials under combined repeated stresses with superimposed static stresses. NACA-TN-3495, Washington, Nov. 1955, 69 pages.
18. H. Majors, D. D. Mills and C. W. McGregor (1949) Fatigue under combined pulsating stresses. J. Appl. Mech. September, 269-276.
19. J. Marin (1956) Interpretation of fatigue strengths for combined stresses. In: Proceedings International Conference on Fatigue of Metals, London, pp. 184-194.
20. T. Palin-Luc and S. Lasserre (1997) High cycle multiaxial fatigue energetic criterion taking into account the volumic distribution of stresses. In: Proceedings 5th Internationl Conference on Biaxial/Multiaxial Fatigue and Fracture (Edited by E. Macha and Z. Mróz), TU Opole, Poland, Vol. I, pp. 63-79.
21. H. J. Gough and H. V. Pollard (1935) The strength of metals under combined alternating stresses. Proc. Inst. Mech. Engng 131, 3-103.
22. H. J. Gough (1950) Engineering steels under combined cyclic and static stresses. Trans. ASME 17(2), 113-125.
23. K. Kanazawa, K. J. Miller and M. W. Brown (1977) Low cycle fatigue under out-of-phase loading conditions. Trans ASME JEMT 99(3), 222-228.
24. X. Chen, A. Gao, A. Abel and S. Wu (1994) Evaluation of low cycle fatigue under nonproportional loading. In: Fourth International Conference on Biaxial/Multiaxial Fatigue, St. Germain en Laye, France, 31 May-3 June 1994. Vol. I., pp. 283-292.
25. S. M. Tipton and J. W. Fash (1989) Multiaxial fatigue life predictions of the SAE specimen using strain based approaches. In: Multiaxial Fatigue: Analysis and Experiments, AE-14 (Edited by G. E. Leese and D. Socie), Society of Automative Engineers, Warrendale, USA, pp. 67-80.
26. S. N. Shukayev (1996) Biaxial low cycle fatigue of titanium alloys and 08X18H10T stainless steel. In: Fatigue '96, Proceedings Sixth International Fatigue Congress, Berlin, 1996, Vol. II, pp. 977-982.
27. S. N. Shukayev (1997) Criteria for limiting condition of metal alloys under biaxial low-cycle fatigue. In: Proceedings 5th International Conference on Biaxial/Multiaxial Fatigue and Fracture (Edited by E. Macha and Z. Mróz), TU Opole, Poland, Vol. I, pp. 207-220.
28. A. G. Kazantsev and N. A. Makhutov (1997) Low-cycle fatigue of anisotropic steel under nonproportional loading. In: Proceedings 5th International Conference on Biaxial/Multiaxial Fatigue and Fracture (Edited by E. Macha and Z. Mróz), TU Opole, Poland, Vol. I, pp. 125-139.
29. F. Ellyin and D. Kujawski (1993) A multiaxial fatigue criterion including mean-stress effect. In: Advances in Multiaxial Fatigue, ASTM STP 1191 (Edited by D. L. McDowell and R. Ellis), American Society for Testing and Materials, Philadelphia, pp. 55-66.
30. W. Sawert (1943) Behaviour of structures under alternating multiaxial loading. Zeitschrift Verein Deutcher Ingenieure 87(39/40), 609-615 (in German).
31. H. J. Gough, H. V. Pollard and W. J. Clenshaw (1951) Some Experiments on the Resistance of Metals to Fatigue under Combined Stresses. ARC, R and M 2522, 141 pages.
32. K. J. Pascoe and J. W. R. de Villiers (1967) Low cycle fatigue of steels under biaxial straining. J. Strain Analysis 2(2), 117-126.
33. F. Ellyin, K. Golos and Z. Xia (1991) In-phase and out-of-phase multiaxial fatigue. Trans. ASME JEMT 113(1), 112-118.
34. K. N. Smith, P. Watson and T. H. Topper (1970) A stressstrain function for the fatigue of metals. J. Materials 5(4), 767-776.
35. F. Ellyin and Z. Xia (1993) A general fatigue theory and its application to out-of-phase cyclic loading. Trans. ASME JEMT 115(4), 411-416.
36. Z. Xia and F. Ellyin (1998) Multiaxial fatigue of an alumina particle reinforced aluminium alloy. Int. J. Fatigue 20(1), 51-56.
37. K. M. Golos (1996) Multiaxial fatigue criterion with mean stress effect. Int. J. Pres. Ves. Piping 69, 263-266.
38. K. M. Golos and S. H. Eshtewi (1997) Multiaxial fatigue and mean stress effect of St5 medium carbon steel. In: Proceedings 5th International Conference on Biaxial/Multiaxial Fatigue and Fracture (Edited by E. Macha and Z. Mróz), TU Opole, Poland, Vol. I, pp. 25-34.
39. D. F. Socie (1987) Multiaxial fatigue damage models. Trans. ASME JEMT 109, 293-298.
40. H. Hoffman and T. Seeger (1989) Stress-strain analysis and life predictions of a notched shaft under multiaxial loading. In: Multiaxial Fatigue: Analysis and Experiments, AE-14 (Edited by G. E. Leese and D. Socie), Society of Automotive Engineers, Warrendale, USA, pp. 81-99.
41. C. C. Chu, F. A. Conle and J. J. Bonnen (1993) Multiaxial stress-strain modelling and fatigue life prediction of SAE axle shafts. In: Advances in Multiaxial Fatigue, ASTM STP 1191 (Edited by D. L. McDowell and R. Ellis), American Society for Testing and Materials, Philadelphia, pp. 37-54.
42. S. Y. Zamrik (1975) The effect of biaxiality in creep-fatigue at elevated temperature. Annual Report, ORNL/Sub-3649-3, Pensylvania State University, University Park, PA, USA.
43. T. Ogata, A. Nitta and K. Kuwabara (1991) Biaxial low-cycle fatigue failure of type 304 stainless steel under in-phase and out-of-phase. In: Fatigue Under Biaxial and Multiaxial Loading (Edited by K. F. Kussmaul, D. L. McDiarmid and D. F. Socie), ESIS Publication 10, MEP, London, pp. 377-352.
44. P. Kurath, S. D. Downing and D. R. Galliart (1989) Summary of non-hardened notched shaft round robin program. In: Multiaxial Fatigue: Analysis and Experiments, AE-14 (Edited by G. E. Leese and D. Socie), Society of Automotive Engineers, Warrendale, USA, pp. 13-32.
45. A. Fatemi and R. I. Stephens (1989) Biaxial fatigue of 1045 steel under in-phase and 90 deg out-of-phase loading conditions. In: Multiaxial Fatigue: Analysis and Experiments, AE-14 (Edited by G. E. Leese and D. Socie), Society of Automotive Engineers, Warrendale, USA, pp. 121-138.
46. T. Itoh, M. Sakane, M. Ohnami and D. F. Socie (1995) Nonproportional low cycle fatigue criterion for type 304 stainless steel. Trans. ASME JEMT 117, 285-292.
47. G. Glinka, G. Wang and A. Plumtree (1995) Mean stress effects in multiaxial fatigue. Fatigue Fract. Engng Mater. Struct. 18, 755-764.
48. T. D. Liebster and G. Glinka (1997) Multiaxial fatigue life prediction methods for engineering components. In: Reliability Assessment of Cyclically Loaded Engineering Structures (Edited by R. A. Smith), Kluwer Academic, Dordrecht, Germany, pp. 101-136.
49. T. Lagoda (1995) The role of correlations between stress states of components in calculations of fatigue life of structural materials. Report 6/95. Faculty of Mechanics, Technical University of Opole, 184 pages (Doctor's Thesis, in Polish).
50. Z. Xia and F. Ellyin (1991) Nonproportional multiaxial cyclic loading: experiments and constitute modelling. Trans. ASME J.Appl. Mech. 58, 317-325.
51. J. Goodman (1954) Mechanics Applied to Engineering, 9th edition, Longmans Green, New York.
52. J. Marin (1956) Interpretation of fatigue strengths for combined stresses. In: Proceedings International Conference on Fatigue of Metals, Inst. Mech. Eng., London, pp. 184-194.
53. A. Troost and E. El-Magd (1975) General formulation of fatigue strength amplitude in the representation of Haigh. Materialprüfung 17(2), 47-49 (in German).
54. C. R. Soderberg (1930) Factor of safety and working stress. Trans. ASME 52, APM 52-2.
55. W. N. Findley, P. N. Mathur, E. Szczepanski and A. O. Temel (1961) Energy versus stress theories for combined stress - a fatigue experiment using a rotating disk. Trans. ASME, D 83, 10-14.
56. V. Grubisic and C. M. Sonsino (1985) Mechanics of fatigue failures under multiaxial loading of cast and sintered materials. Konstruktion 37, 261-269 (in German).
57. J. Neugebauer (1986) About the Fatigue Behaviour of Cast Materials under Multiaxial Loading with Different Frequencies, Fraunhofer Institut für Betriebsfestigkeit (LBF), Darmstadt no. FB-175 (in German).
58. A. Müller (1994) About the strength behaviour of cast nodular and cast mallable iron under multiaxial random loading. Dissertation, TU München, LBF No. FB203 (in German).