Ballistic resistant body armor: Contemporary and prospective materials and related protection mechanisms

Applied Mechanics Reviews

Volumn 62, Issue 5, 2009, Pages 1-20

  David, N V ^a   Gao, X L ^a   Zheng, J Q ^b  

^a Texas A and M University   (United States)

^b U S ARMY   (United States)

Author keywords

Ballistic limit; Ballistic material; Body armor; Ceramics; Composite; Energy absorbing; Fabrics; Impact; Nanotube; Natural fiber; Polymer

Indexed keywords

BALLISTIC LIMIT; BODY ARMORS; COMPOSITE; COMPOSITE ENERGY; ENERGY ABSORBING; IMPACT;

BALLISTICS; CERAMIC MATERIALS; ENERGY ABSORPTION; EXPLOSIVES; FABRICS; LAMINATED COMPOSITES; MACHINE DESIGN; MILITARY OPERATIONS; NANOTUBES; NATURAL FIBERS;

ARMOR;

CERAMICS; COMPOSITES; ENERGY; EXPLOSIVES; FORMING FABRICS; IMPACT; NATURAL FIBERS; POLYMERS;

EID: 70149102612     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3124644     Document Type: Review

References (147)

1. Starley, D., 1999, "Determining the Technological Origins of Iron and Steel," J. Archeol. Sci., 26, pp. 1127-1133.
2. Scales, R. H., 2006, "Clausewitz and World War IV," Armed Forces J., retrieved Feb. 11, 2008, http://www.armedforcesjournal.com/2006/07/1866019.
3. NIJ, 2001, "Selection and Application Guide to Personal Body Armor," NIJ Guide 100-01, U.S. Department of Justice.
4. Barauskas, R., and Abraitiene, A., 2007, "Computational Analysis of Impact of a Bullet Against the Multilayer Fabrics in LS-DYNA," Int. J. Impact Eng., 34, pp. 1286-1305.
5. Colakoglu, M., Soykasap, O., and Özek, T., 2007, "Experimental and Numerical Investigations on the Ballistic Performance of Polymer Matrix Composites Used in Armor Design," Appl. Compos. Mater., 14, pp. 47-58.
6. Gao, X.-L., and Mall, S., 2000, "A Two-Dimensional Rule-of-Mixtures Micro-mechanics Model for Woven Fabric Composites," J. Compos. Technol. Res., 22, pp. 60-70.
7. Barauskas, R., 2005, "Combining Mezzo- and Macro-Mechanical Approaches in a Computational Model of a Ballistic Impact Upon Textile Targets," Proceedings of the Fifth WSEAS International Conference on Simulation, Modeling and Optimization, Corfu, Greece, Aug. 17-19, pp. 427-432.
8. Tan, V. B. C., Tay, T. E., and Teo, W. K., 2005, "Strengthening Fabric Armour With Silica Colloidal Suspensions," Int. J. Solids Struct., 42, pp. 1561-1576.
9. Zeng, X. S., Shim, V. P. W., and Tan, V. B. C., 2005, "Influence of Boundary Conditions on the Ballistic Performance of High-Strength Fabric Targets," Int. J. Impact Eng., 32, pp. 631-642.
10. Nadler, B., and Steigmann, D. J., 2003, "A Model for Frictional Slip in Woven Fabrics," C. R. Mec., 331, pp. 794-804.
11. Duan, Y., Keefe, M., Bogetti, T. A., and Cheeseman, B. A., 2005, "Modeling the Role of Friction During Ballistic Impact of a High-Strength Plain-Weave Fabric," Compos. Struct., 68, pp. 331-337.
12. Duan, Y., Keefe, M., Bogetti, T. A., Cheeseman, B. A., and Powers, B., 2006, "A Numerical Investigation of the Influence of Friction on Energy Absorption by a High-Strength Fabric Subjected to Ballistic Impact," Int. J. Impact Eng., 32, pp. 1299-1312.
13. Zeng, X. S., Tan, V. B. C., and Shim, V. P. W., 2006, "Modeling Inter-Yarn Friction in Woven Fabric Armour," Int. J. Numer. Methods Eng., 66, pp. 1309-1330.
14. Cheeseman, B. A., and Bogetti, T. A., 2003, "Ballistic Impact Into Fabric and Compliant Composite Laminates," Compos. Struct., 61, pp. 161-173.
15. Ulven, C., Vaidya, U. K., and Hosur, M. V., 2003, "Effect of Projectile Shape During Ballistic Perforation of VARTM Carbon/Epoxy Composite Panels," Compos. Struct., 61, pp. 143-150.
16. Briscoe, B. J., and Motamedi, F., 1992, "The Ballistic Impact Characteristics of Aramid Fabrics: The Influence of Interface Friction," Wear, 158, pp. 229-247.
17. Boubaker, B. B., Haussy, B., and Ganghoffer, J.-F., 2007, "Consideration of the Yarn-Yarn Interactions in Meso/Macro Discrete Model of Fabric Part II: Woven Fabric Under Uniaxial and Biaxial Extension," Mech. Res. Commun., 34, pp. 371-378.
18. Lim, C. T., Shim, V. P. W., and Ng, Y. H., 2003, "Finite-Element Modeling of the Ballistic Impact of Fabric Armor," Int. J. Impact Eng., 28, pp. 13-31.
19. Shim, V. P. W., Lim, C. T., and Foo, K. J., 2001, "Dynamic Mechanical Properties of Fabric Armor," Int. J. Impact Eng., 25, pp. 1-15.
20. Gehring, G. G., Jr., 2000, "Blunt Trauma Reduction Fabric for Body Armor," U.S. Patent No. 6,103,641, Aug. 15.
21. Magat, E. E., 1980, "Fibres From Extended Chain Aromatic Polyamides," Philos. Trans. R. Soc. London, Ser. A, 294, pp. 463-472.
22. Lee, Y S., Wetzel, E. D., and Wagner, N. J., 2003, "The Ballistic Impact Characteristics of Kevlar Woven Fabrics Impregnated With Colloidal Shear Thickening Fluid," J. Mater. Sci., 38, pp. 2825-2833.
23. NIST, 2001, "Ballistic Resistance of Personal Body Armor (Revision A)," NIJ Standard-0101.04, coordinated by for NIJ, U.S. Department of Justice.
24. 1997, V50 Ballistic Test for Armor, MIL-STD-662F Standard, Department of Defense Test Method Standard
25. Holmes, G. A., Rice, K., and Snyder, C. R., 2006, "Ballistic Fibers: A Review of the Thermal, Ultraviolet and Hydrolytic Stability of the Benzoxazole Ring Structure," J. Mater. Sci., 41, pp. 4105-4116.
26. Chin, J., Forster, A., Clerici, C., Sung, L., Oudina, M., and Rice, K., 2007, "Temperature and Humidity Aging of Poly(P-Phenylene-2,6-Benzobisoxazole) Fibers: Chemical and Physical Characterization," Polym. Degrad. Stab., 92, pp. 1234-1246.
27. Tamargo-Martinez, K., Villar-Rodil, S., Paredes, J. I., Montes-Moran, M. A., Martinez-Alonso, A., and Tascon, J. M. D., 2004, "Thermal Decomposition of Poly(P-Phenylene Benzobisoxazole) Fibres: Monitoring the Chemical and Nanostructural Changes by Raman Spectroscopy and Scanning Probe Microscopy," Polym. Degrad. Stab., 86, pp. 263-268.
28. Bourbigot, S., Flambard, X., and Poutch, F., 2001, "Study of the Thermal Degradation of High Performance Fibres-Application to Polybenzazole and P-Aramid Fibres," Polym. Degrad. Stab., 74, pp. 283-290.
29. Cervenka, A. J., Young, R. J., and Kueseng, K., 2005, "Micromechanical Phenomena During Hygrothermal Ageing of Model Composites Investigated by Raman Spectroscopy. Part II: Comparison of the Behaviour of PBO and M5 Fibres Compared With Twaron," Composites, Part A, 36, pp. 1020-1026.
30. Said, M. A., Dingwall, B., Gupta, A., Seyam, A. M., Mock, G., and Theyson, T., 2006, "Investigation of Ultra Violet (UV) Resistance for High Strength Fibers," Adv. Space Res., 37, pp. 2052-2058.
31. Wilhelm, M., and Bir, C., 2008, "Injuries to Law Enforcement Officers: The Backface Signature Injury," Forensic Sci. Int., 174, pp. 6-11.
32. Deng, M., Latour, R. A., Drews, M. J., and Shalaby, S. W., 1996, "Effects of Gamma Irradiation, Irradiation Environment, and Postirradiation Aging on Thermal and Tensile Properties of Ultrahigh Molecular Weight Polyethylene Fibers," J. Appl. Polym. Sci., 61, pp. 2075-2084.
33. dos Santos Alves, A. L., Cassiano Nascimento, L. F., and Miguez Suarez, J. C., 2005, "Influence of Weathering and Gamma Irradiation on the Mechanical and Ballistic Behavior of UHMWPE Composite Armor," Polym. Test., 24, pp. 104-113.
34. Bender, J., and Wagner, N. J., 1996, "Reversible Shear Thickening in Mono-disperse and Bidisperse Colloidal Dispersions," J. Rheol., 40, pp. 899-916.
35. Lee, Y S., and Wagner, N. J., 2003, "Dynamic Properties of Shear Thickening Colloidal Suspensions," Rheol. Acta, 42, pp. 199-208.
36. Ahmad, M. R., Wan Yunus, W. A., Salleh, J., and Samsuri, A., 2007, "Performance of Natural Rubber Coated Fabrics Under Ballistic Impact," Malaysian Polymer Journal, 24, pp. 39-51.
37. Walker, J. D., 2001, "Ballistic Limit of Fabrics With Resin," Proceedings of the 19th International Symposium on Ballistics, I. R. Crewther, ed., RUAG Land Systems, Thun, Switzerland, Vol. 3, pp. 1409-1414.
38. Cunniff, P. M., 1999, "Decoupled Response of Textile Body Armor," Proceedings of the 18th International Symposium of Ballistics, W. G. Reinecke, ed., CRC, Boca Raton, FL, Vol. 1, pp. 814-821.
39. Egres, R. G., Jr., Decker, M. J., Halbach, C. J., Lee, Y S., Kirkwood, J. E., Kirkwood, K. M., Wagner, N. J., and Wetzel, E. D., 2004, "Stab Resistance of Shear Thickening Fluid (STF)-Kevlar Composites for Body Armor Applications," Proceedings of the 24th Army Science Conference, Orlando, FL, Nov. 29-Dec. 2.
40. Roylance, D., Chammas, P., Ting, J., Chi, H., and Scott, B., 1995, "Numerical Modeling of Fabric Impact," Proceedings of the National Meeting of the American Society of Mechanical Engineers, San Francisco, CA, Oct.
41. Lee, B. L., Walsh, T. F., Won, S. T., Patts, H. M., Song, J. W., and Mayer, A. H., 2001, "Penetration Failure Mechanisms of Armor-Grade Fiber Composites Under Impact," J. Compos. Mater., 35, pp. 1605-1633.
42. Silva, M. A. G., Cismaşiu, C., and Chiorean, C. G., 2003, "Low Velocity Impact on Laminates Reinforced With Polyethylene and Aramidic Fibres," Proceedings of the Ninth International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science, V. P. Lu, L. N. Lamas, Y.-P. Li, and K. M. Mok, eds., Taylor & Francis, London, UK, pp. 843-851.
43. Katangur, P., Patra, P. K., and Warner, S. B., 2006, "Nanostructured Ultraviolet Resistant Polymer Coatings," Polym. Degrad. Stab., 91, pp. 2437-2442.
44. Miravete, A., 1999, 3-D Textile Reinforcements in Composites Materials, Woodhead Publishing Limited, Cambridge, UK, p. 2.
45. Grogan, J., Tekalur, S. A., Shukla, A., Bogdanovich, A., and Coffelt, R. A., 2007, "Ballistic Resistance of 2D and 3D Woven Sandwich Composites," J. Sandwich Struct. Mater., 9, pp. 283-302.
46. Naik, N. K., Shrirao, P., and Reddy, B. C. K., 2006, "Ballistic Impact Behaviour of Woven Fabric Composites: Formulation," Int. J. Impact Eng., 32, pp. 1521-1552.
47. Wang, X., Hu, B., Feng, Y., Liang, F., Mo, J., Xiong, J., and Qiu, Y., 2008, "Low Velocity Impact Properties of 3D Woven Basalt/Aramid Hybrid Composites," Compos. Sci. Tech., 68, pp. 444-450.
48. Wynne, R. C., 1998, "Flexible, Lightweight, Compound Body Armor," U.S. Patent No. 5,804,757, Sept. 8.
49. Price, A. L., Erb, D. F., Jr., and Ritter, E. D., 2006, "B2: Enhanced Energy Absorbing Materials," U.S. Patent No. 7,101,818, Sept. 5.
50. Shockey, D. A., Marchand, A. H., Skaggs, S. R., Cort, G. E., Burkett, M. W., and Parker, R., 1990, "Failure Phenomenology of Confined Ceramic Targets and Impacting Rods," Int. J. Impact Eng., 9, pp. 263-275.
51. Zhang, X., and Mai, Y.-W., 1997, "Damage Wave Propagation in Elastic-Brittle Materials," Proceedings of the IUTAM Symposium on Rheology of Bodies With Defects, R. Wang, ed., Springer, New York, Vol. 64, pp. 179-190.
52. Chen, W. W., Rajendran, A. M., Song, B., and Nie, X., 2007, "Dynamic Fracture of Ceramics in Armor Applications," J. Am. Ceram. Soc., 90, pp. 1005-1018.
53. Sarva, S., Nemat-Nasser, S., McGee, J., and Isaacs, J., 2007, "The Effect of Thin Membrane Restraint on the Ballistic Performance of Armor Grade Ceramic Tiles," Int. J. Impact Eng., 34, pp. 277-302.
54. LaSalvia, J. C., Horwath, E. J., Rapacki, E. J., James Shih, C., and Meyers, M. A., 2001, "Microstructural and Micromechanical Aspects of Ceramic/Long-Rod Projectile Interactions: Dwell/Penetration Transitions," Proceedings of the Explomet 2000, K. P. Staudhammer, L. E. Murr, and M. A. Meyers, eds., Elsevier Science, New York, pp. 437-446.
55. LaSalvia, J. C., Normandia, M. J., Miller, H. T., and MacKenzie, D. E., 2005, "Sphere Impact Induced Damage in Ceramics: I. Armor-Grade SiC And TiB2," Ceram. Eng. Sci. Proc., 26, pp. 171-181.
56. Chen, M., McCauley, J. W., and Hemker, K. J., 2003, "Shock-Induced Localized Amorphization in Boron Carbide," Science, 299, pp. 1563-1566.
57. Normandia, M. J., 2004, "Impact Response and Analysis of Several Silicon Carbides," Int. J. Appl. Ceram. Technol., 1, pp. 226-234.
58. Hauver, G.E., Rapacki, E.J., Netherwood, P.H., and Benck, R.F., 2005, "Interface Defeat of Long-Rod Projectiles by Ceramic Armor," U.S. Army Research Laboratory, Report No. ARL-TR-3950.
59. Doyoyo, M., 2003, "Experiments on the Penetration of Thin Long-Rod Projectiles Into Thick Long-Cylindrical Borosilicate Targets Under Pressure-Free Polycarbonate, Aluminum and Steel Confinements," Int. J. Solids Struct., 40, pp. 5455-5475.
60. Kaufmann, C., Cronin, D., Worswick, M., Pageau, G., and Beth, A., 2003, "Influence of Material Properties on the Ballistic Performance of Ceramics for Personal Body Armor," Shock Vib., 10, pp. 51-58.
61. Moynihan, T. J., Chou, S.-C., and Mihalcin, A. L., 2000, "Application of the Depth-of-Penetration Test Methodology to Characterize Ceramics for Personnel Protection," U.S. Army Research Laboratory, Report No. ARL-TR-2219.
62. Ray, R. D., Flinders, M., Anderson, A., and Cutler, R. A., 2003, "Hardness/Toughness Relationship for SiC Armor," J. Am. Ceram. Soc., 24(3), pp. 401-410.
63. Zhang, J., Huang, R., Gu, H., Jiang, D., Lin, Q., and Huang, Z., 2005, "High Toughness in Laminated SiC Ceramics From Aqueous Tape Casting," Scr. Mater., 52, pp. 381-385.
64. Flinders, M., Ray, R. D., Anderson, A., and Cutler, R. A., 2005, "High-Toughness Silicon Carbide as Armor," J. Am. Ceram. Soc., 88, pp. 2217-2226.
65. Marsh, G., 2005, "Composites Fight for Share of Military Applications," J. Reinf. Plast. Compos., 49(5), pp. 18-22.
66. Jovicic, J., Zavaliangos, A., and Ko, F., 2000, "Modeling of the Ballistic Behavior of Gradient Design Composite Armors," Composites, Part A, 31, pp. 773-784.
67. Hogg, P. J., 2006, "Composites in Armor," Science, 314, pp. 1100-1101.
68. Arias, A., Zaera, R., Lopez-Puente, J., and Navarro, C., 2003, "Numerical Modeling of the Impact Behavior of New Particulate-Loaded Composite Materials," Compos. Struct., 61, pp. 151-159.
69. Clegg, R. A., White, D. M., Hayhurst, C., Ride, W., Harwick, W., and Hiermaierl, S., 2003, "Advanced Numerical Models and Material Characterization Techniques for Composite Materials Subject to Impact and Shock Wave Loading," J. Phys. France, 110, pp. 311-316.
70. Mahdi, E., Hamouda, A. S. M., Mokhtar, A. S., and Majid, D. L., 2005, "Many Aspects to Improve Damage Tolerance of Collapsible Composite Energy Absorber Devices," Compos. Struct., 67, pp. 175-187.
71. Khalid, A. A., 2006, "The Effect of Testing Temperature and Volume Fraction on Impact Energy of Composites," Mater. Des., 27, pp. 499-506.
72. Ivanov, I., and Tabiei, A., 2004, "Loosely Woven Fabric Model With Viscoelastic Crimped Fibres for Ballistic Impact Simulations," Int. J. Numer. Methods Eng., 61, pp. 1565-1583.
73. Grujicic, M., Pandurangan, B., Zecevic, U., Koudela, K. L., and Cheeseman, B. A., 2007, "Ballistic Performance of Alumina/S-2 Glass Reinforced Polymer-Matrix Composite Hybrid Lightweight Armor Against Armor Piercing (AP) and Non-AP Projectiles," Multidiscipline Modeling in Materials and Structures, 3, pp. 287-312.
74. Mustafa Ubeyli, R., Yi{dotless}ldi{dotless}ri{dotless}m, O., and Ogel, B., 2007, "On the Comparison of the Ballistic Performance of Steel and Laminated Composite Armors," Mater. Des., 28, pp. 1257-1262.
75. Wilkins, M. L., 1978, "Mechanics of Penetration and Perforation," Int. J. Eng. Sci., 16, pp. 793-807.
76. Woodward, R. L., 1990, "A Simple One-Dimensional Approach to Modeling Ceramic Composite Armor Defeat," Int. J. Impact Eng., 9, pp. 455-474.
77. Vermeeren, C. A. J. R., 2003, "An Historic Overview of the Development of Fibre Metal Laminates," Appl. Compos. Mater., 10, pp. 189-205.
78. Vogelesang, L. B., Verbruggen, M. L. C. E., and Paalvast, C. G., 1989, "Armour Plate Composite With Ceramic Impact Layer," U.S. Patent No. 4,836,084, Jun. 6.
79. Vogelesang, L. B., and Roebrocks, G. H. J. J., 1991, "Metal-Resin Laminate Reinforced With S2-Glass Fibres," U.S. Patent No. 5,039,571, Aug. 13.
80. Schaeffler, P., Rajner, W., Claar, D., Trendelenburg, T., and Nishimura, H., 2005, "Production, Properties, and Applications of Alulight® Closed-Cell Aluminum Foams," Proceedings of the Fifth International Workshop on Advanced Manufacturing Technologies, London, Canada, May 16-18, pp. 151-156.
81. Yu, C.-J., Claar, T. D., Eifert, H. H., Gama, B. A., Gillespie, J. W., Jr., Bogetti, T. A., and Fink, B. K., 2001, "Application of Porous Metal Foams in Hybrid Armor Systems," Proceedings of Explomet 2000, K. P. Staudhammer, L. E. Murr, and M. A. Meyers, eds., Elsevier Science, New York, pp. 429-436.
82. Gama, B. A., Bogetti, T. A., Fink, B. K., Yu, C.-J., Claar, T. D., Eifert, H. H., and Gillespie, J. W., Jr., 2001, "Aluminum Foam Integral Armor: A New Dimension in Armor Design," Compos. Struct., 52, pp. 381-395.
83. Lane, R. A., 2005, "High Performance Fibers for Personnel and Vehicle Armor Systems: Putting a Stop to Current and Future Threats," AMPTIAC Quarterly, 9(2), pp. 3-9.
84. Bonsignore, E., ed., 2006, "Body Armour-Technological Issues," Military Technology, 30(4), pp. 72-79.
85. 2003, "New Fibers Could Lighten Body Armor," SSC-Natick Press Release, U.S. Army Soldier Systems Center-Natick, retrieved Feb. 14, 2008, http://www.m5fiber.com/magellan/about_m5.htm.
86. McConnell, V. P., 2006, "Ballistic Protection Materials: A Moving Target," J. Reinf. Plast. Compos., 50(11), pp. 20-25.
87. Faur-Csukat, G., 2006, "A Study on the Ballistic Performance of Composites," Macromol. Symp., 239, pp. 217-226.
88. Sabet, A. R., Beheshty, M. H., and Rahimi, H., 2008, "High Velocity Impact Behavior of GRP Panels Containing Coarse-Sized Sand Filler," Polym. Compos., 29, pp. 932-938.
89. Thaumaturgo, C., and Da Costa, A. M., Jr., 1997, "Shock-Waves on Polymer Composites," J. Mater. Sci. Lett., 16, pp. 1480-1482.
90. Coppage, E. A., 1997, "Anti-Ballistic Protective Composite Fabric," U.S. Patent No. 5,660,913, Aug. 26.
91. Njuguna, J., Pielichowski, K., and Desai, S., 2008, "Nanofiller-Reinforced Polymer Nanocomposites," Polym. Adv. Technol., 19, pp. 947-959.
92. Hsieh, A. J., Song, J. W., Nebo, J., and Singh, A., 2001, "Ballistic Impact Measurements of Polycarbonate Layered-Silicate Nanocomposites," ANTEC 2001 Conference Proceedings, Society of Plastic Engineers, CT, pp. 2185-2190.
93. Song, J. W., and Hsieh, A. J., 2002, "Ballistic Impact Resistance of Monolithic, Hybrid and Nanocomposites of PC and PMMA," Proceedings of the American Society for Composites, 17th Technical Conference, C. T. Sun and H. Kim, eds., Purdue University, West Lafayette, IN, Oct. 21-23.
94. Sands, J. M., Patel, P. J., Dehmer, P. G., Hsieh, A. J., and Boyce, M. C., 2004, "Protecting the Future Force: Transparent Materials Safeguard the Army's Vision," Advanced Materials and Processes Technology Information Analysis Center (AMPTIAC) Quarterly, 8(4), pp. 28-36.
95. Liff, S. M., Kumar, N., and McKinley, G. H., 2007, "High-Performance Elastomeric Nanocomposites Via Solvent-Exchange Processing," Nature Mater., 6, pp. 76-83.
96. Grujicic, M., Pandurangan, B., Angstadt, D. C., Koudela, K. L., and Cheeseman, B. A., 2007, "Ballistic-Performance Optimization of a Hybrid Carbon-Nanotube/E-Glass Reinforced Poly-Vinyl-Ester-Epoxy-Matrix Composite Armor," J. Mater. Sci., 42, pp. 5347-5359.
97. Baughman, R. H., Zakhidov, A. A., and de Heer, W. A., 2002, "Carbon Nanotubes-The Route Toward Applications," Science, 297, pp. 787-792.
98. Qian, L., and Hinestroza, J. P., 2004, "Application of Nanotechnology for High Performance Textiles," Journal of Textile and Apparel, Technology and Management, 4, pp. 1-7.
99. Harris, P. J. F., 2004, "Carbon Nanotube Composites," Int. Mater. Rev., 49, pp. 31-43.
100. Thostenson, E. T., Li, C., and Chou, T.-W., 2005, "Nanocomposites in Context," Compos. Sci. Technol., 65, pp. 491-516.
101. Hiroaki, M., Manjusri, M., and Mohanty, A. K., 2005, "Mechanical Properties of Carbon Nanotubes and Their Polymer Nanocomposites," J. Nanosci. Nanotechnol., 5, pp. 593-1615.
102. Mylvaganam, K., and Zhang, L.C., 2007 "Ballistic Resistance Capacity of Carbon Nanotubes," Nanotechnology, 18, p. 475701.
103. Koziol, K., Vilatela, J., Moisala, A., Motta, M., Cunniff, P., Sennett, M., and Windle, A., 2007, "High-Performance Carbon Nanotube Fiber," Science, 318, pp. 1892-1895.
104. Zhang, M., Atkinson, K. R., and Baughman, R. H., 2004, "Multifunctional Carbon Nanotube Yarns by Downsizing an Ancient Technology," Science, 306, pp. 1358-1361.
105. Reneker, D. H., and Chun, I., 1996, "Nanometre Diameter Fibres of Polymer, Produced by Electrospinning," Nanotechnology, 7, pp. 216-223.
106. Thompson, C. J., Chase, G. G., Yarin, A. L., and Reneker, D. H., 2007, "Effects of Parameters on Nanofiber Diameter Determined From Electrospinning Model," Polymer, 48, pp. 6913-6922.
107. Dalton, A. B., Collins, S., Razal, J., Munoz, E., Ebron, V. H., Kim, B. G., Coleman, J. N., Ferraris, J. P., and Baughman, R. H., 2004, "Continuous Carbon Nanotube Composite Fibers: Properties, Potential Applications, and Problems," J. Mater. Chem., 14, pp. 1-3.
108. Motta, M., Li, Y.-L., Kinloch, I., and Windle, A., 2005, "Mechanical Properties of Continuously Spun Fibers of Carbon Nanotubes," Nano Lett., 5, pp. 1529-1533.
109. Li, Y.-L., Kinloch, I. A., and Windle, A. H., 2004, "Direct Spinning of Carbon Nanotube Fibers From Chemical Vapor Deposition Synthesis," Science, 304, pp. 276-278.
110. Motta, M., Kinloch, I., Moisala, A., Premnath, V., Pick, M., and Windle, A., 2007, "The Parameter Space for the Direct Spinning of Fibers and Films of Carbon Nanotubes," Physica E (Amsterdam), 37, pp. 40-3.
111. Yu, Z., Ait-Kadi, A., and Brisson, J., 1991, "Nylon/Kevlar Composites I: Mechanical Properties," Polym. Eng. Sci., 31, pp. 1222-1227.
112. Salehi-Mobarakeh, H., Nakata, S., Ait-Kadi, A., and Brisson, J., 2007, "Kevlar and Glass Fiber Treatment for Thermoplastic Composites by Step Polycondensation," Polym. Compos., 28, pp. 278-286.
113. Haggenmueller, R., Du, F., Fischer, J. E., and Winey, K. I., 2006, "Interfacial In Situ Polymerization of Single Wall Carbon Nanotube/Nylon 6,6 Nanocomposites," Polymer, 47, pp. 2381-2388.
114. Moniruzzaman, M., Chattopadhyay, J., Billups, W. E., and Winey, K. I., 2007, "Tuning the Mechanical Properties of SWNT/Nylon 6,10 Composites With Flexible Spacers at the Interface," Nano Lett., 7, pp. 1178-1185.
115. Mahfuz, H., Adnan, A., Rangari, V. K., Hasan, M. M., Jeelani, S., Wright, W. J. and DeTeresa, S.J., 2006, "Enhancement of Strength and Stiffness of Nylon 6 Filaments through Carbon Nanotubes Reinforcement," Appl. Phys. Lett., 88, pp. 083119.
116. Terrones, M., 2003, "Science and Technology of the Twenty First Century: Synthesis, Properties and Applications of Carbon Nanotubes," Annu. Rev. Mater. Res., 33, pp. 419-501.
117. Tenne, R., Remškar, M., Enyashin, A., and Seifert, G., 2008, "Inorganic Nanotubes and Fullerene-Like Structures (IF)," Top. Appl. Phys., 111, pp. 631-671.
118. 2 Material," Fullerenes, Nanotubes, Carbon Nanostruct., 6, pp. 157-165.
119. 2) Inorganic Nanotubes and Fullerene-Like Nanoparticles for Solid Lubrication and for Structural Nanocomposites," J. Mater. Chem., 15, pp. 1782-1788.
120. 2Inorganic Fullerenes-Super Shock Absorbers at Very High Pressures," Adv. Mater. (Weinheim, Ger.), 17, pp. 1500-1503.
121. 2 Nanoparticles With Fullerene-Like Structures Under Shock Wave Pressure," J. Am. Chem. Soc., 127, pp. 16263-16272.
122. Jang, J.-H., Ullal, C. K., Choi, T., Lemieux, M. C., Tsukruk, V. V., and Thomas, E. L., 2006, "3D Polymer Microframes That Exploit Length-Scale-Dependent Mechanical Behavior," Adv. Mater. (Weinheim, Ger.), 18, pp. 2123-2127.
123. Cunniff, P. M., Fossey, S. A., Auerbach, M. A., Song, J. W., Kaplan, D. L., Wade Adams, W., Eby, R. K., Mahoney, D., and Vezie, D. L., 1994, "Mechanical and Thermal Properties of Dragline Silk From the Spider Nephila Clavipes," Polym. Adv. Technol., 5, pp. 401-410.
124. Laible, R. C., 1980, "Fibrous Armour," Ballistic Materials and Penetration Mechanics, R. C. Laible, ed., Elsevier Applied Science, New York, pp. 73-115.
125. Massachusetts Institute of Technology, 2007, "Spider Silk Inspires Strong and Stretchy Nanocomposite Fibers," retrieved Oct. 20, 2008, http://www.sciencedaily.com/releases/2007/01/070119115103.htm.
126. Bruet, B. J. F., Song, J., Boyce, M. C., and Ortiz, C., 2008, "Materials Design Principles of Ancient Fish Armour," Nature Mater., 7, pp. 748-756.
127. Vlassak, J. J., Ciavarella, M., Barber, J. R., and Wang, X., 2003, "The Indentation Modulus of Elastically Anisotropic Materials for Indenters of Arbitrary Shape," J. Mech. Phys. Solids, 51, pp. 1701-1721.
128. Mohanty, A. K., Misra, M., and Drzal, L. T., 2002, "Sustainable Bio-Composites From Renewable Resources: Opportunities and Challenges in the Green Materials World," J. Polym. Environ., 10, pp. 19-26.
129. Netravali, A. N., and Chabba, S., 2003, "Composites Get Greener," Mater. Today, 6, pp. 22-29.
130. Pervaiz, M., and Sain, M. M., 2003, "Carbon Storage Potential in Natural Fiber Composites," Resour. Conserv. Recycl., 39, pp. 325-340.
131. Joshi, S. V., Drzal, L. T., Mohanty, A. K., and Arora, S., 2004, "Are Natural Fiber Composites Environmentally Superior to Glass Fiber Reinforced Composites?," Composites, Part A, 35, pp. 371-376.
132. John, M. J., and Thomas, S., 2008, "Biofibers and Biocomposites," Carbo-hydr. Polym., 71, pp. 343-364.
133. Taj, S., Munawar, M. A., and Khan, S. U., 2007, "Review: Natural Fiber-Reinforced Polymer Composites," The Proceedings of the Pakistan Academy of Sciences, 44, pp. 129-144.
134. Garci{dotless}a, M., Garmendia, I., and Garci{dotless}a, J., 2008, "Influence of Natural Fiber Type in Eco-Composites," J. Appl. Polym. Sci., 107, pp. 2994-3004.
135. Panthapulakkal, S., and Sain, M., 2007, "Studies on the Water Absorption Properties of Short Hemp-Glass Fiber Hybrid Polypropylene Composites," J. Compos. Mater., 41, pp. 1871-1883.
136. Thwe, M. M., and Liao, K., 2002, "Effects of Environmental Aging on the Mechanical Properties of Bamboo-Glass Fiber Reinforced Polymer Matrix Hybrid Composites," Composites, Part A: Appl. Sci. Manuf., 33, pp. 43-52.
137. Costa, F H. M. M., and D'Almeida, J. R. M., 1999, "Effect of Water Absorption on the Mechanical Properties of Sisal and Jute Fiber Composites," Polym.-Plast. Technol. Eng., 38, pp. 1081-1094.
138. Joseph, K., Thomas, S., and Pavithran, C., 1995, "Effect of Ageing on the Physical and Mechanical Properties of Sisal-Fiber-Reinforced Polyethylene Composites," Compos. Sci. Tech., 53, pp. 99-110.
139. Mukhopadhyay, S., and Srikanta, R., 2008, "Effect of Ageing of Sisal Fibers on Properties of Sisal-Polypropylene Composites," Polym. Degrad. Stab., 93, pp. 2048-2051.
140. Sombatsompop, N., and Chaochanchaikul, K., 2004, "Effect of Moisture Content on Mechanical Properties, Thermal and Structural Stability and Extrudate Texture of Poly(Vinyl Chloride)/Wood Sawdust Composites," Polym. Int., 53, pp. 1210-1218.
141. Santulli, C., 2001, "Post-Impact Damage Characterisation on Natural Fibre Reinforced Composites Using Acoustic Emission," NDT & E Int., 34, pp. 531-536.
142. Ray, A. K., Das, S. K., and Pathak, L. C., 2003, "Synthesis of Silicon Carbide Mats Using Natural Fibers," Mater. Lett., 57, pp. 1120-1123.
143. Ahmad, I., Chin, T.S., Cheong, C.K., Jalar, A., Abdullah, I., 2005, "Study of Fiber Surface Treatment on Reinforcement/Matrix Interaction in Twaron Fiber/ENR Composites," Am. J. App. Sci. (special issue), pp. 14-20.
144. Silva, R. V., Spinelli, D., Bose Filho, W. W., Claro Neto, S., Chierice, G. O., and Tarpani, J. R., 2006, "Fracture Toughness of Natural Fibers/Castor Oil Polyurethane Composites," Compos. Sci. Tech., 66, pp. 1328-1335.
145. Dhakal, H. N., Zhang, Z. Y., Richardson, M. O. W., and Errajhi, O. A. Z., 2007, "The Low Velocity Impact Response of Non-Woven Hemp Fibre Reinforced Unsaturated Polyester Composites," Compos. Struct., 81, pp. 559-567.
146. Wambua, P., Vangrimde, B., Lomov, S., and Verpoest, I., 2007, "The Response of Natural Fiber Composites to Ballistic Impact by Fragment Simulating Projectiles," Compos. Struct., 77, pp. 232-240.
147. Risby, M. S., Wong, S. V., Hamouda, A. M. S., Khairul, A. R., and Elsadig, M., 2008, "Ballistic Performance of Coconut Shell Powder/Twaron Fabric Against Non-Armour Piercing Projectiles," Def. Sci. J., 58, pp. 248-263.