Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases

Materials and Design

Volumn 31, Issue 1, 2010, Pages 220-226

  Farnoush, H ^a   Momeni, A ^a   Dehghani, K ^a   Mohandesi, J Aghazadeh ^a   Keshmiri, H ^b  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

^b Esfarayen Steel Complex ^*  (Iran)

Author keywords

Duplex stainless steel; Law of mixture; Modeling; Strain interaction coefficient

Indexed keywords

2205 DUPLEX STAINLESS STEEL; APPARENT ACTIVATION ENERGY; CONSTITUENT PHASE; CONSTITUENT PHASIS; DEFORMATION MECHANISM; DUPLEX STAINLESS STEEL; DYNAMIC RECOVERY; EMPIRICAL CONSTANTS; FLOW STRESS; HIGH TEMPERATURE; HIGH TEMPERATURE BEHAVIOR; HOT COMPRESSION TESTS; HOT DEFORMATION; INTERACTION COEFFICIENT; LAW OF MIXTURE; MODELING; ORDER OF MAGNITUDE; RESTORATION PROCESS; RULE OF MIXTURE; SINE FUNCTIONS; STRAIN INTERACTION COEFFICIENT; STRAIN RATE SENSITIVITY; STRESS EXPONENTS; TEMPERATURE RISE; Z VALUE; ZENER-HOLLOMON PARAMETER Z;

ACTIVATION ENERGY; AUSTENITE; COMPRESSION TESTING; DEFORMATION; DYNAMIC RECRYSTALLIZATION; FERRITE; HOT WORKING; LAWS AND LEGISLATION; MIXTURES; STRAIN RATE; STRESS ANALYSIS; WEAR RESISTANCE;

STAINLESS STEEL;

EID: 69749086387     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.06.028     Document Type: Article

References (35)

1. Itman Filho A., Rollo J.M.D.A., Silva R.V., and Martinez G. Alternative process to manufacture austenitic-ferritic stainless steel wires. Mater Lett 59 (2005) 1192-1194
2. Gurrappa I., and Krishna Reddy C.V. Characterization of newly developed structural DMR1700 steel and comparison with different steels for chemical applications. J Mater Process Technol 182 (2007) 195-201
3. Garzón C.M., and Tschiptschin A.P. EBSD texture analysis of a high temperature gas nitrided duplex stainless steel, mater. Sci Eng A 441 (2006) 230-238
4. Solomon H.D., and Devine T.M. In: Lula R.A. (Ed). Duplex stainless steels (1982), ASM, Metals Park (OH) 693-756
5. Nilsson J.O. Super duplex stainless steel. Mater Sci Technol 8 (1992) 685-700
6. Johansson J., and Oden M. Load sharing between austenite and ferrite in a duplex stainless steel during cyclic loading. Metall Mater Trans A 31 (2000) 1557-1563
7. Iza-Mendia A., Pinol-Juez A., Urcola J.J., and Gutierrez I. Microstructural and mechanical behavior of a duplex stainless steel under hot working conditions. Metall Mater Trans A 29 (1998) 2975-2986
8. Niewielski G., Radwañski K., and Kuc D. The influence of hot-working processing on plasticity and structure of duplex steel. Arch Mater Sci Eng 28 6 (2007) 325-332
9. Cabrera J.M., Mateo A., Llanes L., Prado J.M., and Anglada M. Hot deformation of duplex stainless steels. J Mater Process Technol 143-144 (2003) 321-325
10. Cizek P., Wynne B.P., and Rainforth W.M. EBSD investigation of the effect of strain path changes on the microstructure and texture of duplex stainless steel during hot deformation. J Phys 26 (2006) 331-334
11. McQueen H.J., and Bourell D.L. In: Sachdev A.K., and Embury J.D. (Eds). Formability and metallurgical structure (1986), TMS, Warrendale 341-342
12. Evangelista E., Mengucci P., Bowles J., and McQueen H.J. Grain and subgrain structures developed by hot working in As-Cast 434 stainless steel. High Temp Mater Process 12 (1993) 57-66
13. McQueen HJ, Ryan ND, Evangelista E, Xia X. Flow stresses, grain and subgrain structures developed by hot working in As-Cast 409 stainless steel. In: Proc. 34th mechanical working and steel processing. Warrendale: Iron and Steel Inst. AIME; 1993. p. 101-7.
14. Straub S, Blum W. Hot workability of steels and light alloys composites. McQueen HJ, et al. (Eds.), Montreal: Met. Soc. CIM; 1996, p. 181.
15. Evangelista E, McQueen HJ, Verlinden B, Barteri M. Hot forming of duplex stainless steels. In: Proc. 3rd European conf. stainless steels '99, vol. 3. Milano: Science and Market, AIM; 1999. p. 253-64.
16. McQueen HJ, Ryan ND, Zaripova R, Farkhutdinov K. Comparisom of hot working behavior of austenitic and ferritic stainless steels. In: Proc. 37th mechanical working and steel processing. Warrendale: Iron and Steel Inst. AIME; 1996. p. 883.
17. Mao P., Yang K., and Su G. J Mater Sci Technol 19 4 (2003) 379-381
18. Evangelista E., McQueen H.J., Niewczas M., and Cabibbo M. Hot workability of 2304 and 2205 duplex stainless steels. Can Metall Quart 43 3 (2004) 339-353
19. McQueen H.J., and Jonas J. Recent advances in hot working: fundamental dynamic softening mechanisms. J Appl Metal Work 3 (1984) 233-241
20. Cizek P., and Wynne B.P. Mechanism a of ferrite softening in a duplex stainless steel deformed in hot torsion. Mater Sci Eng A (1997) 88-94
21. Chandra T, Bendeich D, Dunne DP. Hot working of a duplex stainless steel. In: Gifkins RC, editor. Proc. ICSMA 6, Melbourne, Australia; 1982. p. 505.
22. Balancin O., Hoffmann W.A.M., and Jonas J.J. Influence of microstructure on the flow behavior of duplex stainless steels at high temperatures. Metall Mater Trans A 31A (2000) 1353-1364
23. Ankem S., and Margolin H. Finite element method (FEM) calculations of stress-strain behavior of Alpha-Beta Ti-Mn Alloys: part II. Stress and strain distributions. Metall Trans A 13 4 (1982) 595-605
24. Neti S., Vijayshankar M.N., and Ankem S. Finite element method modeling of deformation behavior of two-phase materials part II: Stress and strain distributions. Mater Sci Eng A (1991) 155-164 145 and 147
25. Cho K., and Gurland J. The law of mixtures applied to the plastic deformation of two-phase alloys of coarse microstructures. Metall Trans A 19 (1988) 2027-2040
26. Humphreys F.J., and Hatherly M. Recrystallization and related annealing phenomena. 2nd ed. (2004), Pergamon, Netherland 417
27. Hosford W.F., and Caddel R.M. Metal forming, mechanics and metallurgy (2007), Cambridge University Press, Newyork
28. Luo J., Li M., Li H., and Yu W. Effect of the strain on the deformation behavior of isothermally compressed Ti-6Al-4V alloy mater. Sci Eng A 505 1-2 (2009) 88-95
29. Bruschi S., Poggio S., Quadrini F., and Tata M.E. Workability of Ti-6Al-4V alloy at high temperatures and strain rates. Mater Lett 58 27-28 (2004) 3622-3629
30. Duprez L., De Cooman B.C., and Akdut N. Flow stress and ductility of duplex stainless steel during high-temperature torsion deformation. Metall Mater Trans A 33A 7 (2002) 1931-1938
31. Prasad Y.V.R.K., and Seshararyulu T. Modelling of hot deformation for microstructural control. Int Metall Rev 43 (1998) 243-258
32. McQueen HJ, Ryan ND. Strength of metals and alloys. In: Hettunen PO, et al., editors. Proc. ICSMA 8. Oxford: Pergamon Press; 1988. p. 1323.
33. Ryan N.D., and McQueen H.J. Flow stress, dynamic restoration, strain hardening and ductility in hot working of 316 steel. J Mater Process Technol 21 (1990) 177-199
34. Tegart WJMcG, Gittins A. The hot deformation of austenite. In: Ballance JB, editor. Proc. conf. on hot deformation of austenite. Ohio; August 1976. p. 1-46.
35. Duprez L., De Cooman B.C., and Akdut N. High-temperature stress and strain partitioning in duplex stainless steel. Mater Res Adv Tech 93 (2002) 236-243