Load sharing between austenite and ferrite in a duplex stainless steel during cyclic loading

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 31, Issue 6, 2000, Pages 1557-1570

  Johansson, Johan ^a,b   Odén, Magnus ^b  

^a and MAGNUS OD N   (United States)

^b LINKÖPING UNIVERSITY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; AUSTENITIC TRANSFORMATIONS; COLD ROLLING; CYCLIC LOADS; FERRITE; HARDNESS; PLASTIC DEFORMATION; RESIDUAL STRESSES; STRESS ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION ANALYSIS; YIELD STRESS;

DEFORMATION TEXTURE; DUPLEX STAINLESS STEEL; LOAD SHARING; RESIDUAL MICROSTRESSES;

STAINLESS STEEL;

EID: 0034206601     PISSN: 10735623     EISSN: None     Source Type: None    
DOI: 10.1007/s11661-000-0166-3     Document Type: Article

References (37)

1. T. Magnin and J.M. Lardon: Mater. Sci. Eng. A, 1988, vol. A104, pp. 21-28.
2. T. Magnin, J. Lardon, and L. Coudreuse: Low-Cycle Fatigue, ASTM STP 942, ASTM, Philadelphia, PA, 1988, pp. 812-23.
3. F. Perdriset, T. Magnin, T. Cassange, P. Hoch, and F. Dupoiron: in Duplex Stainless Steels '94, T. Gooch, ed., TWI, Cambridge, United Kingdom, 1994, vol. 3.
4. J. Vogt, A. Messai, and J. Foct: in Duplex Stainless Steels '94, T. Gooch, ed., TWI, Cambridge, United Kingdom, 1994, vol. 1.
5. S. Degallaix, A. Seddouki, G. Degallaix, and J.-O. Nilsson: in Fatigue '93, J.-P. Bailon and J.I. Dickson, eds., Engineering Materials Advisory Services Ltd., Warley, United Kingdom, 1993, vol. 1, pp. 91-96.
6. J. Polak, S. Degallaix, and G. Degallaix: Euromat 93: The 3rd Eur. Conf. on Advanced Materials and Processes, R. Pichoir and P. Costa, eds., Les Éditions de Physique, Les Ulis Cedex A, France, 1993, vol. 1, pp. 679-84.
7. S. Harjo, Y. Tomota, and M. Ono: Acta Mater., 1999, vol. 47, pp. 353-62.
8. K. Kamachi, T. Okada, M. Kawano, S. Namba, T. Ishida, N. Tani, and T. Kubohori: in Progress in Science and Engineering of Composite, ICCM-1V, T. Hayashi, K. Kawata, and S. Umekawa, eds., JSCM, Tokyo, 1982, pp. 1383-89.
9. J. Johansson, M. Odén, and X.-H. Zeng: Acta Mater., 1999, vol. 47, pp. 2669-84.
10. T. Siegmund, F. Fischer, and E. Werner: Mater. Sci. Eng., 1993, vol. A169, pp. 125-34.
11. I.C. Noyan and J.B. Cohen: Residual Stress Measurement by Diffraction and Interpretation, Springer-Verlag, New York, NY, 1987.
12. J.D. Almer, J.B. Cohen, and R.A. Winholtz: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2127-36.
13. J.D. Almer, J.B. Cohen, and B. Moran: Mater. Sci Eng., 2000, vol. 284, pp. 268-79.
14. R. Winholtz and J. Cohen: Mater. Sci. Eng., 1992, vol. A154, pp. 155-63.
15. R. Winholtz and J. Cohen: Metall. Trans. A, 1992, vol. 23A, pp. 341-54.
16. I.C. Noyan: Metall. Trans. A, 1983, vol. 14A, pp. 1907-14.
17. R.A.Winholtz and J.B. Cohen: Aust. J. Phys., 1988, vol. 41, pp. 189-99.
18. J.L. Lebrun and K. Inal: in Advances in X-ray Analysis, Vol 40, J.V. Gilfrich, T.C. Huang, C.R. Hubbard, I.C. Noyan, P.K. Predecki, D.K. Smith, and R.L. Snyder, International Centre for Diffraction Data, Newtown Square, PA, 1996, CD-rom.
19. K. Inal and J.L. Lebrun: in ICRS-5, T. Ericsson, M. Oden, and A. Andersson, eds., Linköping University, Linköping, 1997, vol. I, pp. 472-77.
20. M. Barrai, J. Lebrun, J. Sprauel, and G. Maeder: Metall. Trans. A, 1987, vol. ISA, pp. 1229-38.
21. H.J. Bunge: Int. Mater. Rev., 1987, vol. 32, pp. 265-91.
22. H.J. Bunge, A. Ul-Haq, and H. Weiland: in INFACON 6, SAIMM, Johannesburg, 1992, vol. 2, pp. 197-201.
23. W. Hutchinson, K. Ushioda, and G. Runnsjö: Mater. Sci. Technol., 1985, vol. 1, pp. 728-31.
24. A. Ul-Haq, H. Weiland, and H. Bunge: J. Mater. Sci., 1994, vol. 29, pp. 2168-76.
25. A. Ul-Haq, H. Weiland, and H. Bunge: Mater. Sci. Technol, 1994, vol. 10, pp. 289-98.
26. R. Hill: Proc. Phys. Soc., 1952, vol. A65, pp. 349-54.
27. A. Mateo, L. Lianes, L. Itugoyen, and M. Anglada:Acta Mater., 1996, vol. 44, pp. 1143-53.
28. T.P. Kruml, J. Polak, J. Obrtlik, and S. Degallaix: Acta Mater., 1997, vol. 45, pp. 5145-51.
29. J. Polak, T. Kruml, and S. Degallaix: Scripta Metall., 1993, vol. 29, pp. 1553-58.
30. E. Macherauch: Exp. Mech., 1966, vol. 6, pp. 140-53.
31. H. Mughrabi: in Dislocations and Properties of Real Materials, M.H. Loretto, ed.. The Institute of Metals, London, 1984, pp. 244-62.
32. Z. Wang and R Margolin: Acta Metall., 1986, vol. 34, pp. 721-33.
33. M. McClinton and J.B. Cohen: Mater. Sci. Eng., 1982, vol. 56, pp. 259-63.
34. I.C. Noyan and J.B. Cohen: Mater. Sci. Eng., 1985, vol. 75, pp. 179-93.
35. G. Wahlberg and G.L. Dunlop: Proc. Stainless Steels '87, Institute of Metals, London, 1987, pp. 291-99.
36. J.-O. Nilsson: Scripta Metall., 1983, vol. 17, pp. 593-96.
37. B.E. Warren: X-ray Diffraction, Addison-Wesley, Reading, MA, 1969, pp. 251-313.