COMPARISON OF HOT WORKING BEHAVIOR OF AUSTENITIC AND FERRITIC STAINLESS STEELS

37th Mechanical Working and Steel Processing Conference Proceedings

Volumn , Issue , 1996, Pages 883-894

  McQueen, H J ^a   Ryan, N D ^a   Zaripova, R ^b   Farkhutdinov, K ^b  

^a Civil and Environmental Engineering   (Canada)

^b INSTITUTE FOR METALS SUPERPLASTICITY PROBLEMS   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; DYNAMIC RECRYSTALLIZATION; FERRITE; GRAIN BOUNDARIES;

AUSTENITIC; CONDITION; FERRITIC; FERRITIC STAINLESS STEEL; HIGH STRAINS; LOW FLOW; LOWS-TEMPERATURES; MICRO-STRUCTURAL; MISORIENTATIONS; WORKING BEHAVIOR;

HOT WORKING;

EID: 79960638832     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (104)

1. C.M Sellars and W.J. McG. Tegart, Int. Metall. Rev., 17, 1972, 1-24.
2. H.J. McQueen and D.L. Bourell, J. Met., 39. [7], 1987, 28-35.
3. B. Ahlblom and R. Sandstrom, Int. Metall. Rev., 27, 1982, 1-27.
4. N.D. Ryan and H.J. McQueen, J. Mech. Working Tech., 12, 1986, 279-296.
5. N.D. Ryan and H.J. McQueen, J. Mech. Working Tech., 12, 1986, 323-349.
6. H.J. McQueen, E. Evangelista and N.D. Ryan, in: W. Nicodemi, (Ed.), Processes and Material Technology, Stainless Steel 1993, (Florence), Assoc. Ital. Metal, Milan, 1993, Vol. 2, 289-302.
7. H.J. McQueen, N.D. Ryan and E. Evangelista, Mat. Sci. Eng., 81, 1986, 259-272.
8. E. Evangelista, N.D. Ryan and H.J. McQueen, Met. Sci. Tech., 5, 1987, 50-58.
9. N.D. Ryan and H.J. McQueen, High Temp. Tech., 8, 1990, 27-44.
10. N.D. Ryan and H.J. McQueen, High Temp. Tech., 8, 1990, 185-200.
11. N.D. Ryan and H.J. McQueen, J. Mat. Proc. Tech., 20, 1990, 177-199.
12. A. Cingara and H.J. McQueen, J. Mat. Proc. Tech., 36, 1992, 17-30, 31-42.
13. H.J. McQueen, Y. Cui, B. Li, Q. Meng and N.D. Ryan, in: N.D. Ryan et al., (Eds.), Strip Casting. Hot and Cold Working of Stainless Steel, Met. Soc. CIMM, Montreal, 1993, 181-192.
14. N.D. Ryan and H.J. McQueen, Stainless Steels '87, Inst. of Metals, London, 1987, 498-507.
15. H.J. McQueen and N.D. Ryan, in: D.G. Brandon et al. (Eds.), Strength of Metals and Alloys. ICSMA 9, Freund Publishing House, London, 1991, 359-366.
16. M. Zidek and B. Kubickova, Tech. Digest, 3, 1968, 154-161.
17. N.D. Ryan and H.J. McQueen, RA. Lula (Ed.), New Developments in Stainless Steel Technology, ASM, Materials Park, OH, 1985, 293-304.
18. H.J. McQueen, S. Yue, N.D. Ryan and E. Fry, Advanced Materials and Technologies, L.A. Dobrzanski, ed., Silesian Tech. Univ., Gliwice, Poland, 1995, 295-332.
19. H.J. McQueen, S. Yue, N.D. Ryan and E. Fry, J. Mat. Proc. Tech., 53, 1995, 293-310.
20. C. Imbert, N.D. Ryan and H.J. McQueen, Metall. Trans., 15A, 1984, 1855-1864.
21. T. Chandra, I. Weiss and J.J. Jonas, Met. Sci., 16, 1982, 97-104.
22. M. G. Akben, I. Weiss and J.J. Jonas, Acta Metall., 29, 1981, 111.
23. K.P. Rao, E.B. Hawbolt, H.J. McQueen and D. Baragar, Can. Metall. Q., 32, 1993, 165-175.
24. H.J. McQueen, O. Overdal, A. Cingara and H. Gjestland, Mat. High Temp., 10, 1992, 207-218.
25. T.Matuszewski, P.M.Machmeier and H.J. McQueen, Metall. Trans., 22A, 1991, 469-497.
26. H.J. McQueen and J.J. Jonas, J. Appl. Metal Working, 3 (1984) 233-241.
27. H.J. McQueen and J.J. Jonas, J. Appl. Metal Working, 3, 1985, 410-420.
28. H.J. McQueen, in: T.G. Langdon et al., (Eds.), Hot Deformation of Aluminum Alloys, TMS-AIME, Warrendale, PA, 1991, 31-54.
29. H.J. McQueen, Mat. Sci. Eng., A101, 1987, 149-160.
30. H.J. McQueen, E. Evangelista and N.D. Ryan, in: T. Chandra, (Ed.), Recrystallization ('90) in Metals and Materials, TMS-AIME, Warrendale, PA, 1990, 89-100.
31. C.M. Sellars, Phil. Trans. R. Soc. London, A288, 1978, 147-158.
32. T. Sakai and J.J. Jonas, Acta Metall., 32, 1984, 189-209.
33. D.L. Bourell and H.J. McQueen, J. Mat. Shaping Tech., 5, 1987, 53-73.
34. E.Evangelista, P. Mengucci, J. Bowles and J.H. McQueen, High Temp. Mat. Proc. 12, 1993, 57-66.
35. H.J. McQueen, E. Evangelista, P. Mengucci, N.D. Ryan and J. Bowles, Application of Stainless Steels 92, M. Nordberg and J. Bjorkund (eds.), Jernkontoret, Stockholm, 1992, 924-933.
36. H.J. McQueen, N.D. Ryan, E. Evangelista and X. Xia, Proc. 34th Mechanical Working and Steel Processing Conf., Iron and Steel Soc, AIME Warrendale, PA 1992, Vol. 30, 101-107.
37. N.D. Ryan, C. Imbert and H.J. McQueen, in: N.D. Ryan et al., (Eds.), Strip Casting. Hot and Cold Working of Stainless Steel, Met. Soc. CIMM, Montreal, 1993, 165-180.
38. T. Sheppard and P. Richards, J. Mat. Sci., 22, 1987, 1642-1650
39. P. Richards and T. Sheppard, Mat. Sci. Tech., 2, 1986, 841-846.
40. P. Richards and T. Sheppard, Mat. Sci. Tech., 2, 1986, 836-840.
41. G. Glover and CM. Sellars, Met. Trans., 4A, 1973, 765-775.
42. G.A. Redfern and CM. Sellars, Deformation Under Hot Working Conditions, Iron Steel Inst., London 1986, 29-37.
43. G.A. Redfern and CM. Sellars, J. I.S.I., 208, 1970, 576-582.
44. C. Rossard, Metaux Corrosion Industries, 35, 1960, 190-205.
45. R. Lombry, C. Rrossard and B.J. Thomas, Rev. Metall. CIT, 78, 1981, 975-988.
46. C.G. Schmidt, CM. Young, B. Walser, R.H. Klundt and O.D. Sherby, Metal. Trans., 13A, 1982, 447-456.
47. H.J. McQueen and M.E. Kassner, Superplasticity in Aerospace, H.C Heikkenen and T.R. McNelley, eds., Met. Soc. AIME, Warrendale, PA, 1988, 77-96.
48. J.H. McQueen, J. Sankar and S. Fulop, Mechanical Behavior of Materials (ICM3), Pergamon Press, Oxford, UK, 1979, Vol. 2, 675-684.
49. J.L. Robbins, O.C Sheppard and O.D. Sherby, ASM Trans. Quart., 60, 1967, 205.
50. F.E. White, Rev. Met.. 63, 1966, 991-998.
51. F.E. White and C. Rossard, Deformation Under Hot Working Conditions, SR #108, Iron and Steel Inst., London, 1968, 14-20.
52. M.D. Coward, G.J. Richardson and C.M.Sellars, Met. Tech., 4, 1977, 75-80.
53. R.A. Reynolds and W.J. McG.Tegart, JISI. 200, 1962, 1044-1059.
54. J.L. Robbins, O.C. Sheppard and O.D. Sherby, JISI. 199, 1961, 175-180.
55. A. Gueussier and R. Castro, Rev. Met., 55., 1958, 1023-1040.
56. J.P. Sah, G.J. Richardson and C.M.Sellars, Met. Sci., 8, 1974, 325-331.
57. E. Shapiro and G.E. Dieter, Met. Trans. 2, 1971, 1385-1391.
58. M.J. Luton and W.J. McG.Tegart, Met.Sci.J. 3., 1969, 142-146.
59. M.J. Luton and CM. Sellars, Acta Metal., 7, 1969, 1033-1043.
60. D.F. Lupton and D.H. Warrington, J. Met. Sci., 6, 1972, 200-204.
61. M.J. Harrigan and O.D. Sherby, Mater. Sci. Eng., 7, 1971, 177-189.
62. J.P.A. Immarigeon and J.J. Jonas, Acta Met., 19, 1971, 1053-1061.
63. M.D. Coward, G.J. Richardson and C.M.Sellars, Met. Tech., 3, 1976, 550-555.
64. H.J. McQueen, in: G. Sih and C.J. Provan, (Eds.), Defects. Fracture and Fatigue, Martinus Nicholt Pub, The Hague, 1983, 459-471.
65. H.J. McQueen, J. Bowles and N.D. Ryan, Microstruc. Sci., 12, 1989, 357-373.
66. N.D. Ryan and H.J. McQueen, in: A.S. Krausz et al., (Eds.), Constitutive Laws of Plastic Deformation and Fracture, Kluwer Academic Pub., Dordrecht, 1990, 333-340.
67. E.V. Konopleva, V.M. Khlestov and H.J. McQueen, Phase Transformation During Thermal/Mechanical Processing of Steel, E.B. Hawbolt and S.Yue eds., Met. Soc. CIM, 1995, 243-258.
68. N.D. Ryan and H.J. McQueen, in: B. Fazan et al., (Eds.), Proc. 4th Steel Rolling Congress, IRSID, Mazieres-Le-Metz, France, 1987, F17.1-F17.9.
69. S.V. Raj and G.M. Pharr, Mat. Sci. Eng., 81, 1986, 217-237.
70. F.E. Al-Jouni and C.M. Sellars, in: J.B. Bilde-Sorensen et al., (Eds.), Deformation of Multi-Phase and Particle Containing Materials, Riso Natl. Laboratory, Roskilde, Denmark, 1983, 131-137.
71. H.D. Solomon and T.M. Devine, Jr., in: R.A. Lula, (Ed.), Duplex Stainless Steels, ASM, Metals Park, OH, 1983, 693-756.
72. S.K. Srivastava and V.R. Ishwar, in: R.A. Lula, (Ed.), New Developments in Stainless Steel Technology, ASM, Metals Park, OH, 1985, 187-194.
73. T. Chandra, D. Bendeich and D.P. Dunne, in: R.C. Gifkins, (Ed.), Strength of Metals and Alloys, Pergamon Press, Oxford, 1982, Vol. 1, 505-510.
74. T. Chandra, D.P. Dunne and P. Campbell, in: H.J. McQueen et al., (Eds.), Strength of Metals and Alloys, Pergamon Press, Oxford, 1985, 947-952.
75. R. Nemoto, K. Osozawa, K. Osada and T. Tsuda, Stainless Steels '84, Inst. of Metals, London, 1985 149-157.
76. J. R. Kearns, Microstruc. Sci., 15, 1987, 529-545.
77. H.J. McQueen and D.L. Bourell, J. Appl. Metal Work 5, [1] 1987, 163-189.
78. J. Ruzzante, G. Carfi, J. Tormo and A.M. Hey, in: R.C. Gifkins, (Ed.), Strength of Metals and Alloys, Pergamon Press, Oxford, 1982, Vol. 1, 223-238.
79. R.G. Zzripova and K.C. Farkhutdinov, Strip Casting Hot and Cold Working of Stainless Steel, N.D. Ryan, et al. (eds.), Met. Soc, CIM, Montreal, 1993, 253-265.
80. E. Evangelista, Meccanica, Univ. of Ancona, 60131 Italy
81. M. Barteri, E. Evangelista, M. Niewczas and L. Scoppio, Metal Italiana, 86, 1994, 539-543.
82. H.J. McQueen, Recrystallization 92, M. Fuentes and J. Gill Sevillana, eds., Trans. Tech. Pub. Switzerland, Mat. Sci. Forum, 113-115, 1993, 429-434.
83. E. Hornbogen, Metall Trans. 10A, 1979, 947-972.
84. F. Garofalo, C. Raichmond, W.F. Dornis and E. von Gemmingen, Joint Intnl. Conf. on Creep, Inst. Mech. Eng., London, 1963, 31-39.
85. H.J. McQueen, W. Blum, Q. Zhu and V. Demuth, in J. J. Jonas et al., (eds.), Advances in Hot Deformation Textures and Microstructures, TMS-AIME, Warrendale, PA, 1993, 235-250.
86. P.J. Wilbrandt and P. Haasen, Z. Metalkde, 71, 1980, 273-278, 385-395.
87. G. Glover and CM. Sellars, Met. Trans., 3A, 1972, 2271-2280.
88. K. Ameyama, K. Murakami, T. Maki and I. Tamuro, J. Japan Inst. Metals, 12, 1985, 1045.
89. T. Maki, K. Okaguchi and I. Tamuro, Strength of Metals and Alloys (ICSMA 6), R.C. Gifkins ed., Pergamon Press, Oxford, 1982, Vol. 1, 529-534.
90. J.K. Solberg, H.J. McQueen, N. Ryum and E. Nes, Phil. Mag., 60, 1989, 447-471.
91. A.N. Belyakov, R.O. Kaibyshev, Phys. Met. Metallog., 76, [2], 1993, 162-167.
92. F. Gao and Y.R. Xiu, Acta Metal. Sinica, 24, 1988, pp. 195-200.
93. R.G. Zaripova, O.A. Kaibyshev and G.A. Salischev, Phys. Met. Metallog., 73, 1992, pp. 415-421.
94. S.J. Hales, T.R. McNelley and H.J. McQueen, Metall. Trans., 22a, 1991, pp. 1037-1047.
95. A. Korbel and M. Richert, Acta. Metall., 33, 1985, 1971-1978.
96. M. Richert, Mat. Sci. Eng., A129, 1990, 1-10.
97. J. Warg, Z. Horita, M. Furukawa, M. Nemoto, N.K. Tsenev, R.Z. Valiev, Y. Ma and T.G. Langden, J. Mater. Res., 8, 1993, 2810-2818.
98. R.Z. Valiev, F. Chmelik, F. Bourdeaux, G. Kapelski, B. Baudelet, Scripta Met. Mat., 27, 1992, 855-860.
99. G.V. Salishchev, O.R. Valiakhmetov, V.A. Valitov, Sh. Kh. Mukhtarov, Superplasticity in Adv. Mamet, (ICSAM'94). T. G. Langdon, ed., Mat. Sci. Forum, 170-172., 1994, 121-129.
100. V.V. Rybin, The Large Plastic Deformation and Cracking of Metals, Metallurgia, Moscow, RF, 1986, 224. (in Russian)
101. G. Salishchev, K. Farkhutdinov, V. Afanasyev, Metally, No2, 1993, 116-123.
102. M. Oku, K. Tomimura, S. Takaki, V. Tokunaga, J. Jap. Soc. Heat. Treat., 29, 1984, 198-204.
103. K.G. Farkhutdinov, R.G. Zaripova, N.A. Breikina, Mat. Sci. Eng., A174, 1994, 217-223.
104. S. Straub, Ph.D. Thesis, Materials Science, Univ. Erlangen-Nürnberg, 1994.