Weld repair of ferritic welded materials for high temperature application

International Materials Reviews

Volumn 49, Issue 5, 2004, Pages 299-324

  Issler, S ^a,b   Klenk, A ^a   Shibli, A A ^c   Williams, J A ^d  

^a UNIVERSITY OF STUTTGART   (Germany)

^b MERCEDES BENZ AG   (Germany)

^c European Technology Development Ltd   (United Kingdom)

^d Pine Bank   (United Kingdom)

Author keywords

Creep; Ferritic alloys; High temperature performance; Weld repair

Indexed keywords

FERRITIC ALLOYS; HIGH TEMPERATURE PERFORMANCE; WELD REPAIRS;

AUSTENITE; CREEP; HIGH TEMPERATURE APPLICATIONS; MICROSTRUCTURE; REPAIR; WELDING; WELDS;

FERRITE;

EID: 6944219976     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/095066004225021936     Document Type: Review

References (129)

1. R. Blum and J. Hald: Proc. 7th Liège Conf. on 'Materials for advanced power engineering 2002', (ed. J. Leeomte-Beckers (et al.), 1009-1016; 2002, Jülich, Forschungszentrum Jülich.
2. S. Ambrose, C. J. Moss, A. B. L. Croker and R. P. Harrison: Proc. Conf. on 'Failures, repairs and life assessment of pressure vessels and piping III', Melbourne, Australia, Mar. 1995, Institute of Metals and Materials Australia, 13-19.
3. E. Tolksdorf: Proc. Conf. on 'Failure, repair and life assessment of pressure vessels and piping III', Melbourne, Australia, Mar. 1995, Institute of Metals and Materials Australia, 31-40.
4. R. A. Ainsworth: 'Assessment procedure for the high temperature response of structures', British Nuclear pic, Barnwood, Glos., UK, 1990.
5. L. Kiessling and N. Johansson: Proc. 'CAPE 99' 5th Int. Colloquium on 'Ageing of materials and methods for the assessment of lifetimes of engineering plant', (ed. R. K. Penny), 13-27; 1999, Sheffield, Engineering Materials Advisory Service (EMAS).
6. 'Procedure for remaining life assessment of creeping components', Generation Operations Memorandum GOM(101), CEGB, London, 1982.
7. P. Auerkari, J. Salonenm and K. Borggren: 'Guidelines for evaluation of service damage', NORDTEST 302, VIT (Technical Research Centre Finland), Espoo, Finland, 1995.
8. J. Storesund and L. A. Samuelson: OM MI (Power Plant Oper. Mainten. Mater.), Dec. 2002, 1, (3), (Internet Journal ommi. co.uk).
9. 'Welding Handbook', 9th edn, Vol. 1, 'Welding science and technology'; 2001, New York, American Welding Society.
10. R. Hill and A. J. Summerfield: Proc. Conf. on 'Refurbishment and life extension of steam plant', London, 1987, IMechE, paper C291/87.
11. R. Viswanathan; Proc. 2nd Conf. on 'Weld and repair technology for power plant', Daytona Beach, FA; 1995, Palo Alto, CA, Electric Power Research Institute (EPRI), 3-23.
12. D. W. Gandy, S. J. Findlan and R. Viswanathan; in 'Fracture design analysis of pressure vessels, heat exchangers, piping components, and fitness for service', PVP-Vol. 388; 1999, New York, ASME.
13. S. Issler, A. Klenk, A. A. Shibli and J. A. Williams: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ (Institute de Soldadura e Qualidade), 81-112.
14. S. J. Brett; Proc. VGB Conf. on 'Materials and weld technology in power plants', Essen, Germany, Mar. 1994, VGB (Technische Vereinigung der Grosskraftwerksbetrieber).
15. L. H. Toft and D. E. Yeldham: Proc. Conf. on 'Welding research related to power plant', (ed. N. F. Eaton and L. M. Wyatt), 5-19; 1972, London, CEGB.
16. J. D. Wilson, M. Hawkes, P. Jones and S. Pascoe: Proc. Parsons Conf. 2000, 'Advanced materials for 21st century turbines in power plant', 508-522; 2000, London, IoM Communications.
17. A. T. Price: Proc. Conf. on 'Joining dissimilar metals', 48-79; 1982, Palo Alto, CA, AWS/EPRI.
18. T. R Rowberry, B. I. Bagnall and J. A. Williams: Proc. Conf. on 'Welding and fabrication in the nuclear industry', London, Apr. 1979, British Nuclear Energy Society (BNES), 247-256.
19. R. D. Stout: 'Weldability of steels', 4th edn; 1987, New York, Welding Research Council (WRC).
20. H. J. Schuller, L. Hagn and A. Woitscheck: Der Maschinenschaden, 1974, (1), 1-13.
21. S. J. Brett and P. A. Smith: Proc. 'Baltica IV, VTT Symp. 184, 'Plant maintenance for managing life and performance', Helsinki, Finland, 1998, VTT (Technical Research Centre of Finland, Espoo), 225-237.
22. A. T. Price: Proc. Conf. on 'Rupture ductility of creep resistant steels', 246-267; 1990, London, The Institute of Materials.
23. T. R. Rowley and B. M. Walker: 'The testing of a mild steel header at high temperature under creep conditions', CEGB Report R/M/R173, Central Electricity Generating Board, UK, 1973.
24. R. Day, T. R. Rowley and J. A. Williams: 'Examination of deformation and failure modes of an overheated 1CrMo boiler header assembly of complex form', CEGB Report RD/M/R277, Central Electricity Generating Board, UK, 1979.
25. BS5500, 1995, British Standard Specification for Unfired Fusion Welded Pressure Vessels, BSI (British Standards Institution), London (currently PD5500:2003).
26. ASME Sections III and VIII, Boilar and Pressure Vessal bode, 2000, American Society of Mechanical Engineers, New York, USA.
27. RCC-MR, 1985, 'Design and construction rules for mechanical components of FBR nuclear islands', AFCEN, Paris.
28. ASME N47-29, Class 1; 1992, 'Components in elevated temperature service', ASME, New York, USA.
29. M. Escaravage, M. Bauermeister and D. Buckthorpe: Proc. Conf. 'Life of welds at high temperatures'; London, 1990, IMechE.
30. US National Board Inspection Code (NBIC), 1989, 1995, 1999, National Board of Boiler and Pressure Vessel Inspectors, Columbus, OH, USA.
31. W. D. Doty: Proc. PVRC/EWI Weld Repair Technology Workshop, 'Challenges and solutions in controlled deposition repair welding for ferritic materials', San Diego, CA; 1996, New York, Pressure Vessel Research Council (PVRC)/Edison Welding Institute (EWI), 3-9.
32. D. W. Gandy, S. J. Findlan and R. Viswanathan: in 'Integrity of high temperature welds', (ed. T. H. Hyde et al.), 111-124; 1998, Bury St Edmunds, Professional Engineering Publishing.
33. D. S. Kim: Proc. Conf. 'Repair welding and serviceability', San Diego, CA, Jan. 2001; New York, Pressure Vessel Research Council (PVRC)Welding Research Council (WRC), 268-282.
34. N. Bailey: Proc. 5th Int. Symp. of Japan Welding Society on 'Advanced technology in welding and materials processing and evaluation', Tokyo, Japan, Apr. 1990, Japan Welding Society.
35. A. M. Barnes, R. L. Jones, D. J. Abson and T. G. Gooch: Proc. Materials Congress '98, 'Frontiers in materials science and technology', 153-176; 2000, London, IoM Communications Ltd.
36. J. Storesund: 'Guidelines for repair welding', IIW Commission IX, Working Group 'Creep', Budapest, Hungary, 1998.
37. D. W. Gandy, S. J. Findlan and R. Viswanathan: Proc. 2nd Conf. on 'Weld and repair technology for power plant', Daytona Beach, FA; 1995, Palo Alto, CA, EPRI, 249-281.
38. C. F. Ettienne and J. H. Heerings: Steel Res., 1994, 65, (5), 187.
39. T. H. Hyde and A. Tang: Int. Mater. Rev., 1998, 43, (6), 221.
40. C. Coussement, M. De Witte, A. Dhooge, R. Dobbelaere, M. Steen, E. Van Der Donckt and L. Van Muysen: Lastijdschrift/Rev. Soudure, 1990, (2), 27-36.
41. M. J. Manjoine: 'Crack initiation and growth in welds at 593°C, Report no. WARD-HT-3045-28, Westinghouse Co., Pittsburgh, PA, 1977.
42. J. A. Williams T. H. Hyde and W. Sun: Proc. 9th Int. Conf. on 'Creep and fracture of engineering materials and structures', (ed. J. D. Parker), 613-622; 2002, IoM Communications.
43. C. F. Ettienne, J. H. Heerings and J. H. van Wortel: Proc. VGB Conf. on 'Residual life', Vol. 2, Mannheim, Germany, Jul. 1992, VGB (Tech. Vereinigung Grosskraftwerksbetrieber).
44. W. Arnswald, R. Blum, B. Neubauer and K. E. Poulsen: Proc. Conf. on 'Creep', Tokyo, Japan, 1986, Japan Society of Mechanical Engineers, 367-372.
45. M. De Witte and C. Coussement: in 'Creep characterisation, damage and life assessment', (ed. D. A. Woodford et al.), 417-422; 1992, Materials Park, OH, ASM International.
46. C. D. Lundin and Y. Wang: 'Repair welding of service exposed CrMo weldments', WRC Bulletin 348, Nov. 1989; New York, Pressure Vessel Research Council (PVRC)Welding Research Council (WRC).
47. I. Nonaka, T. Ito, S. Ohtsuki and Y. Takagi: Proc. 2nd HIDA Conf. on 'Advances in defect assessment in high temperature plant', Stuttgart, Germany, 2000, 52-57.
48. A. B. L. Croker, M. R. Finlay and M. Law: Proc. Conf. on 'Welding and repair technology for power plant', Daytona Beach, FA; 1996, Palo Alto, CA, EPRI, 217-222.
49. A. B. L. Croker, R. P. Harrison and C. J. Moss: Proc. Conf. on 'Failures, repairs and life assessment of pressure vessels and pipework', Melbourne, Australia, Mar. 1995, Institute of Metals and Materials Australia, 61-64.
50. H. J. Westwood: Proc. Conf. on 'Materials ageing and component life extension', (ed. V. Bicego et al.), 733-743; 1995, West Midlands, Engineering Materials Advisory Service (EMAS).
51. M. Law and W. Payten: Int. J. Pressure Vessels Piping, 1997, 72, 45-49.
52. T. H. Hyde, Wei Sun and A. A. Becker: J. Strain Analysis, 2000, 35, 5.
53. H. R. Hall and D. R. Hayhurst: Proc. R. Soc. (London) A, 1991, 433, 383.
54. T. H. Hyde, A. Tang and W. Sun: Proc. Conf. on 'Integrity of high temperature welds'; 1998, Bury St Edmunds, Professional Engineering Publishing.
55. T. H. Hyde, J. A. Williams and W. Sun: Int. J. Press. Vessels Piping, 1999, 76, 8.
56. T. H. Hyde, W. Sun and A. A. Becker: Proc. 6th Int. Conf. on 'Damage and fracture mechanics: computer aided assessment and control', (ed. A. P. S. Selvadurai and C. A. Brebbia), 415-424; 2000, Southampton/Boston, Wessex Institute of Technology Press.
57. T. H. Hyde, W. Sun and A. A. Becker: Int. J. Mech. Sci., 2000, 42, 3.
58. J. Storesund, P. Andersson, L. A. Samuelson and P. Segle: Proc. Conf. on 'Ageing of materials and methods for the assessment of the lifetimes of engineering plant', (ed. R. K. Penny), 129-144; 1997, Rotterdam, Balkema.
59. L. A. Samuelson, P. Segle, P. Andersson and J. Storesund: Proc. 2nd HIDA Conf. on 'Advances in defect assessment in high temperature plant', Stuttgart, Germany, 2000, paper S6-4.
60. S.-T. Tu and R. Sandstrom: Proe. Conf. on 'Creep and fracture of engineering materials and structures', (ed. B. Wilshire and R. W. Evans), 695-704; 1993, London, The Institute of Materials.
61. L. A. Samuelson, P. Segle and J. Storesund: Proc. EPRI Conf. on 'Welding and repair technology for fossil fired plants', Williamsburg, VA; 1994, Palo Alto, CA, Electric Power Research Institute (EPRI).
62. I. J. Perrin, D. R. Hayhurst and R. A. Ainsworth: Eur. J. Mech. A, Solids, 2000, 19, 223-258.
63. F. Vakili-Tahami D. R. Hayhurst and M. T. Wong: in 'Reference stress methods - analysing safety and design', (ed. I. W. Goodall); 2002, Bury St Edmunds, Professional Engineering Publishing.
64. T. H. Hyde, J. A. Williams and W. Sun: J. Strain Analysis, 2003, 38, (1), 1-29.
65. T. H. Hyde, J. A. Williams, A. A. Becker and W. Sun: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ (Institute de Soldadura e Qualidade), 29-44.
66. T. H. Hyde, J. A. Williams and W. Sun: OMMI (Power Plant Oper. Mainten. Mater.), Dec. 2002, 1, (3), (Internet Journal ommi.co.uk).
67. L. M. Kachanov: The theory of creep'; 1960, Boston Spa, UK, National Lending Library (English translation by A. J. Kennedy).
68. S. Marie and C. Delavai: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ, 57-68.
69. A. Klenk and K. Maile: Proc. 28th MPA Seminar, MPA/NIMS Workshop, 'Modem 9-12%Cr steels for power plant applications', Oct. 2002, Stuttgart, Germany, MPA (Staatliche Materialprüfungsanstalt)/IfW (Fachgebiet und Institut für Werkstoffkunde), 34. 1-34.16.
70. A. Klenk, J. Schemmel and K. Maile: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ, 45-56.
71. J. J. Hickey, P. J. Bernard, A. M. Bissell and M. J. Jirinec: Proc. Conf. on 'Welding and repair technology for power plants', EPRI TR-107719, 193-213; 1995, Palo Alto, CA, EPRI.
72. T. H. Hyde, W. Sun and A. A. Becker: Proc. 2nd HIDA Conf. on 'Advances in defect assessment in high temperature plant", Stuttgart, Germany, 2000, paper SR-1.
73. M. C. Coleman, J. D. Parker and D. J. Walters: Int. J. Pressure Vessel Piping, 1985, 18, 277-310.
74. J. A. Williams: Proc. 3rd Int. Conf. on 'Creep and fracture of engineering materials and structures', 721-740; 1987, London, The Institute of Metals.
75. F. Rotvel, C. Sampietri, L. Verelst, H. van Wortel and L. Y. Zhi: Proc. 'Baltica IV, VTT Symp. 184, 'Plant maintenance for managing life and performance', Helsinki, Finland, 1998, VTT (Technical Research Centre of Finland, Espoo), 201-222.
76. H. van Wortel, J. H. Heerings and F. Arav: Proc. 'Baltica III' Conf. 'Plant condition and life management', Helsinki, Finland, 1995, VTT (Technical Research Centre of Finland), 255-270.
77. H. van Wortel and F. Arav: Proc. Int. Conf. on 'Pressure vessel technology', 41-49; 1996, New York, ASME.
78. H. van Wortel: Proc. Conf. on 'Langzeitverhalten warmfester Stahle und Hochtemperaturwerkstoffe', Dusseldorf, Germany, Nov. 1999, VDEh (Verein Deutscher Eisenhüttenleute), 67-82.
79. F. V. Ellis and R. Viswanathan: Proc. Conf. on 'Integrity of high temperature welds'; 1998, Bury St Edmunds, Professional Engineering Publishing.
80. J. Storesund, R. Wu and R. Sandstrom: Proc. 'Baltica III' Conf. 'Plant condition and life management', Helsinki, Finland, 1995, VIT (Technical Research Centre of Finland, Espoo), 119-135.
81. Unpublished work, EPRI, quoted in Ref. 71, p. 209.
82. S. Concari, G. Fedeli, M. Pinto and J. A. Williams: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ (Instituto de Soldadura e Qualidade), 113-124.
83. P. J. Alberry, J. Myers and B. Chew: Weld. Met. Fabr., 1976, 45, (11), 549.
84. P. J. Alberry and W. K. C. Jones: Met. Technol., 1982, 9, (10), 419.
85. D. Rosenthal: Weld. J. Res. Suppl., 1941, 220, 220s.
86. K. Easterling: 'Introduction to the physical metallurgy of welding'; 1983, London, Butterworth.
87. Ø. Grong: 'Metallurgical modelling of welding', 2nd edn; 1997, London, The Institute of Materials.
88. M. C. Coleman: in 'Weldments: physical metallurgy and failure phenomena', (ed. R. J. Christofffel et al.), 409-420; 1978, Schenectady, NY, General Electric Co.
89. R. C. Reed and H. K. D. H. Bhadeshia: Acta. Metall. Mater., 1994, 42, (11), 3663-3678.
90. Proc. 1996 Workshop on 'Challenges and solutions to repair welding for power and process plant', San Diego, CA, WRC Bulletin 412; New York, Pressure Vessel Research Council (PVRC)/Welding Research Council (WRC).
91. C. D. Lundin: Proc. 1996 Workshop on 'Challenges and solutions in repair welding for power and process plant', San Diego, CA, WRC Bulletin 412, 16-26; New York, Pressure Vessel Research Council (PVRC)/Welding Research Council (WRC).
92. T. W. Lau, M. L. Lau and G. C. Poon: Proc. 1996 Workshop on 'Challenges and solutions in repair welding for power and process plant', San Diego, CA, WRC Bulletin 412, 35-43; New York, Pressure Vessel Research Council (PVRQ/Welding Research Council (WRC).
93. C. Lundin: Proc. Conf. on 'Repair welding and serviceability', San Diego, CA, Jan. 2001; New York, Pressure Vessel Research Council (PVRC)/Welding Research Council (WRC), 448-455.
94. L. M. Friedman: Proc. 1996 Workshop on 'Challenges and solutions in repair welding for power and process plant', San Diego, CA, WRC Bulletin 412, 27-35; New York, Pressure Vessel Research Council (PVRC)/Welding Research Council.
95. P. B. Bates, T. W. Kelly and D. J. Allen: Proc. Conf. on 'Assessment and extension of residual lifetime of fossil fired power plant", Moscow, 1994, VGB (Tech. Vereinigung Grosskraftwerksbetrieber)/VTI Technologies, paper L18.
96. J. N. Clark: Mater. Sci. Technol., 1985, 1, 1069.
97. D. J. Allen and T. W. Kelly: Proc. Conf. on 'Welding and repair technology for power plants', Daytona Beach, FA, EPRI TR-107719, 105-125; 1996, Palo Alto, CA, EPRI.
98. V. N. Zemzin, Z. K. Titiner, R. E. Shron, Yu. Bukin, L. E. Kredit and A. T. Bereznev: Energomashinstroenie, 1978, 12, 25.
99. S. J. Brett: Proc. Conf. on 'Refurbishment and life extension of power plant', 253-260; 1987, London, IMechE.
100. S. J. Brett, D. J. Abson and D. L. Jones: Proc. Conf. on 'Integrity of high temperature welds'; 1998, Bury St Edmunds, Professional Engineering Publishing.
101. K. C. Mitchell: Proc. EPRI Conf. on 'Weld repair technology for fossil fired plant', Williamsburg, VA; 1994, Palo Alto, CA, Electric Power Research Institute (EPRI).
102. K. C. Mitchell: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ (Instituto de Soldadura e Qualidade), 133-138.
103. K. C. Mitchell and S. J. Brett: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ, 125-132.
104. J. A. Williams: Proc. Conf. on 'Integrity of high temperature welds', (ed. T. H. Hyde et al.); 1998, Bury St Edmunds, Professional Engineering Publishing.
105. P. Dong and F. W. Brust: J. Pressure Vessel Technol. (Trans ASME), 2000, 122, 329-338.
106. P. Dong, J. Zhang and P. J. Bouchard: J. Pressure Vessel Technol. (Trans ASME), Feb. 2002, 124, 74-80.
107. D. J. Smith, E. Kingston, A. Thomas and R. Ehrlich: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ (Instituto de Soldadura e Qualidade).
108. P. Dong: Proc. Conf. on 'Repair welding and serviceability", San Diego, CA, Jan. 2001; New York, Pressure Vessel Research Council (PVRC)/Welding Research Council (WRC), 145-169.
109. EEC Project INTEGRITY, 'Integrity of repair welds', Growth Project GRD/10886, Coordinated by MPA (Staatliche Materialprüfungsanstalt), Stuttgart, European Commission, 1999.
110. EEC Project WELDON, 'Weld strength for high temperature component design and operation', Growth Project GR5D-CT-00596, Coordinated by ISQ (Instituto de Soldadura e Qualidade), Portugal, European Commission, 2001.
111. S. J. Brett: Proc. Conf. on 'The microstructure and performance of joints in high temperature alloys', Nov. 2002, London, IoM Communications.
112. D. W. Gandy and R. Smith: Proc. 4th RRAC Conf. on 'Welding and repair technology for power plants', Marco Island, Naples, FA; 2000, Palo Alto, CA, Repair and Replacement Applications Center (RRAC)/Electric Power Research Institute (EPRI).
113. R. Viswanathan, D. Gandy and S. J. Findlan: in 'Fracture design analysis of pressure vessels, heat exchangers, piping components, and fitness for service', PVP-Vol. 388, 373-382; 1999, New York, ASME.
114. R. Viswanathan and D. Gandy: Proc. Conf. on 'Integrity of high temperature welds', (ed. T. H. Hyde et al.), 15-40; 1998, Bury St Edmunds, Professional Engineering Publishing.
115. R. Viswanathan and D. Gandy: J. Mater. Eng. Perform., 1999, 8, 579.
116. R. Viswanathan, D. Gandy and S. J. Findlan: J. Pressure Vessel Technol. (Trans ASME), Nov. 1997, 119, 414.
117. R. Viswanathan, D. Gandy and S. J. Findlan: J. Pressure-Vessel Technol. (Trans ASME), Nov. 1999, 121, 345.
118. C. Lundin, P. Liu, G. Zhou and K. K. Khan: 'Efficiency of low carbon l.25Cr0.5Mo weld metal for repair welding', WRC Bulletin 439; 1999, New York, Pressure Vessel Research Council (PVRC)/Welding Research Council (WRC).
119. C. Lundin and M. Prager: Proc. Conf. on 'Repair welding and serviceability', San Diego, CA, Jan. 2001; New York, Pressure Vessel Research Council (PVRC)/Welding Research Council (WRC), 231-267.
120. W. F. Newell and R. A. Swain: Proc. EPRI 2nd Conf. on 'Weld and repair technology for power plant', Daytona Beach, FA; 1995, Palo Alto, CA, EPRI, 151-161.
121. W. F. Newell, Jr: Proc. Conf. on 'Repair welding and serviceability', San Diego, CA, Jan. 2001; New York, Pressure Vessel Research Council/Welding Research Council, 135-144.
122. R. Cantrell, D. Wright and B. Bain: Proc. 4th RRAC Conf. on 'Welding and repair technology for power plants' Marco Island, Naples, FA; 2000, Palo Alto, CA, Repair and Replacement Applications Center (RRAC)/Electric Power Research Institute (EPRI).
123. R. Sims and C. Becht: Proc. Conf. 'Repair welding and serviceability', San Diego, CA, Jan. 2001; New York, Pressure Vessel Research Council (PVRC)/Welding Research Council (WRC), 282-295.
124. R. van Vulpen and H. J. M. Hulshof: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ (Instituto de Soldadura e Qualidade), 219-226.
125. D. Canonico and J. Henry: Proc. Conf. on 'Repair welding and serviceability', San Diego, CA, Jan. 2001; New York, Pressure Vessel Research Council (PVRC)/Welding Research Council (WRC), 563-576.
126. K. Coleman: Proc. 3rd HIDA and INTEGRITY Conf. on 'Integrity of high temperature repair welds', Oeiras-Lisbon, Portugal, Sept. 2002, ISQ, 7-15.
127. K. C. Mitchell, D. J. Allen and M. C. Coleman: Proc. EPRI 2nd Conf. on 'Weld and repair technology for power plant', Daytona Beach, FA; 1995, Palo Alto, CA, Electric Power Research Institute (EPRI), 67-79.
128. J. G. Emmerson, D. W. Gandy and A. Kimbrough: Proc. EPRI 2nd Conf. on 'Weld and repair technology for power plant', Daytona Beach, FA; 1995, Palo Alto, CA, EPRI, 83-99.
129. D. W. Gandy, K. Coleman, T. Fox and T. Sherlock: Proc. 4th RRAC Conf. on 'Welding and repair technology for power plants', Marco Island, Naples, FA; 2000, Palo Alto, CA, Repair and Replacement Applications Center (RRAC)/Electric Power Research Institute (EPRI).