Welding residual stresses and effects on fracture in pressure vessel and piping components: a millennium review and beyond

Journal of Pressure Vessel Technology, Transactions of the ASME

Volumn 122, Issue 3, 2000, Pages 329-338

  Dong, P ^a   Brust, F W ^a  

^a Ctr for Welded Structures Research   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; FRACTURE MECHANICS; MATHEMATICAL MODELS; PIPING SYSTEMS; PRESSURE VESSELS; RESIDUAL STRESSES; STRESS ANALYSIS; STRESS CONCENTRATION; STRESS INTENSITY FACTORS; WELDS;

LEAK BEFORE BREAK ASSESSMENT; WELD RESIDUAL STRESS MODELS;

WELDING;

EID: 0034250511     PISSN: 00949930     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.556189     Document Type: Article

References (37)

1. BS7910, 1999, British Standards Institution, London, U.K.
2. API RP-579, 2000 First Edition, "Recommended Practices for Fitness-for-Service."
3. Brest, F. W., Dong, P., and Zhang, J., 1997, "A Constitutive Model for Welding Process Simulation Using Finite Element Methods," Advances in Computational Engineering Science, Atluri, S. N., and Yagawa, G., eds., pp 51-56.
4. Brest, F. W., Dong, P., and Zhang, J., 1997, "Influence of Residual Stresses and Weld Repairs on Pipe Fracture," ASME PVP-Vol. 347, Approximate Methods in the Design and Analysis of Pressure Vessel and Piping Components, pp. 173-191.
5. Brest, F. W., Zhang, J., and Dong, P., 1997, "Pipe and Pressure Vessel Cracking: The Role of Weld Induced Residual Stresses and Creep Damage during Repair," Transactions of the 14th International Conference on Structural Mechanics in Reactor Technology (SMiRT 14), Lyon, France, Vol. 1, pp. 297-306.
6. Brust, F. W., Dong, P., and Zhang, J., 1997, "Crack Growth Behavior in Residual Stress Fields of a Core Shroud Girth Weld," Fracture and Fatigue, Mehta, H. S., ed., ASME PVP-Vol. 350, pp. 391-406.
7. Dong, Y., Hong, J. K., Tsai, C. L., and Dong, P., 1997, "Finite Element Modeling of Residual Stresses in Austenitic Stainless Steel Pipe Girth Welds," Weld. J. (Miami), 10, No. 10, pp. 442s-449s.
8. Dong, P., Ghadiali, N. D., and Brust, F. W., 1998, "Residual Stress Analysis of a Multi-Pass Girth Weld," ASME PVP-Vol. 373, Fatigue, Fracture, and Residual Stresses, pp. 421-431.
9. Dong, P., Hong, J. K., Zhang, J., Rogers, P., Bynum, J., and Shah, S., 1998, "Effects of Repair Weld Residual Stresses on Wide-Panel Specimens Loaded in Tension," ASME J. Pressure Vessel Technol., 120, pp. 122-128.
10. Dong, P., Zhang, J., and Li, M. V., 1998, "Computational Modeling of Weld Residual Stresses and Distortions - An Integrated Framework and Industrial Applications," ASME PVP-Vol. 373, Fatigue, Fracture, and Residual Stresses, pp. 311-335.
11. Dong, P., and Zhang, J., 1999, "Residual Stresses in Strength-Mismatched Welds and Implications on Fracture Behavior," Eng. Fract. Mech., 64, pp. 485-505.
12. Zhang, J., Dong, P., and Brust, F. W., 1997, "A 3-D Composite Shell Element Model for Residual Stress Analysis of Multi-Pass Welds," Transactions of the 14th International Conference on Structural Mechanics in Reactor Technology (SMiRT 14), Lyon. France, Vol. 1, pp. 335-344.
13. Zhang, J., Dong, P., Brust, F. W., Shack, W. J., Mayfield, M. E., and McNeil, M., 2000. "Modeling Weld Residual Stresses in Core Shroud Structures," Nucl. Eng. Des., 195, pp. 171-187.
14. Zhang, J., and Dong, P., 2000, "Residual Stresses in Welded Moment Frames and Effects on Fracture," ASCE J. Struct. Eng., Mar., No. 3.
15. Dong, P., Rahman, S., Wilkowski, G., Brickstad, Bergman, M., Bouchard, J., and Chivers, T., 1996, "Effect of Weld Residual Stresses on Crack-Opening Area Analysis of Pipes for LBB Applications," ASME PVP-Vol. 324, pp. 47-64.
16. Dong, P., 1995, "Modeling and Analysis of Alloy 2195 Welds in Super Light-weight Tank," Battelle Project Report to Marshall Space Flight Center, Huntsville, Alabama, July.
17. Rodgers, D. E., and Fletcher, P. R., 1938, "The Determination of Internal Stresses from the Temperature History of a Butt Welded Pipe," Welding J. Res. Suppl., pp. 4-7.
18. Masubuchi, K., 1970, "Control of Distortion and Shrinkage in Welding," Welding Research Council Bulletin No. 149, Apr. 1970.
19. Kamichika, R., Yada, T., and Okamoto, A., 1974, "Internal Stresses in Thick Plates Weld-Overlaid with Austenitic Stainless Steel (Report 2)," Trans. Jpn. Welding Soc., 5, No. 1, Apr.
20. Friedman, E., 1975, "Thermomechanical Analysis of the Welding Process Using the Finite Element Method," ASME J. Pressure Vessel Technol., 97, Aug., pp. 206-213.
21. McGuire, P. A., and Groom, J. J., 1979, "Computational Analysis and Experimental Evaluation for Residual Stresses From Induction Heating," Final Report to EPRI (RP1394-4), Battelle Memorial Institute, Dec. 28.
22. Barber, T. E., Brust, F. W., Mishler, H. W., and Kanninen, M. F., 1981, "Controlling Residual Stresses by Heat Sink Welding," EPRI Report NP-2159-LD, December.
23. Brust, F. W., and Rybicki, E. F., 1981, "Computational Model of Backlay Welding for Controlling Residual Stresses in Welded Pipes," ASME J. Pressure Vessel Technol., 103, Aug., pp. 294-299.
24. Brust, F. W., and Kanninen, M. F., 1981, "Analysis of Residual Stresses in Girth Welded Type 304-Stainless Pipes," ASME J. Mater. Energy Sys., 3, No. 3, pp. 56-62.
25. Brust, F. W., and Stonesifer, R. B., 1981, "Effects of Weld Parameters on Residual Stresses in BWR Piping Systems," EPRI Final Report, NP-1743, March.
26. Fricke, S., Keim, E., and Schmidt, J., 1998, "Numeric Determination of Residual Weld Stresses," Proceedings, ICES'98, October 7-9, Atlanta.
27. Goldak, J, et al., 1998, "Progress and Pacing Trends in Computational Weld Mechanics," Proceedings, ICES'98, October 7-9, Atlanta, Atluri, S. N., ed.
28. Buchmayr, B., 1993, "PC-Based Software in Welding Technology," Mathematical Modeling of Weld Phenomena, Cerjak H., and Easterling, K. E., eds., The Institute of Materials.
29. Rybicki, E. R, and Stonesifer, R. B., 1979, "Computation of Residual Stresses Due to Multi-pass Welds in Piping Systems," ASME J. Pressure Vessel Technol., 101, pp. 149-154.
30. Sun, X., Dong, P., and Kimchi, M., 1997, "The Coupled Elecirical-Thermal-Mechanical Process Associated With Aluminum Welding," Proc. of the International Body Engineering Conference (IBEC), Stuttgart, Germany, September 30-October 2, Vol. 30, pp. 42-48.
31. Cao, Z., Brust, F. W., Dong, Y., Nanjundan, A., and Jutla, T., 2000, "A New Comprehensive Thermal Solution Procedure For Multi-pass and Curved Welds," Proceedings, 2000 ASME Pressure Vessel and Piping Conference, Seattle, WA, July 23-27.
32. Shack, W. J., Ellington, W. A., and Pahis, L. E., 1980, "Measurement of Residual Stresses in Type 304 Stainless Steel Butt Weldments," EPRI NP-1413.
33. Brust, F. W., Dong. P., Zhang, J., and Yang, Y., 2000, "The Effect of Material History On Crack Growth," to be presented at and appear in Proceedings of the 2000 ASME Pressure Vessel and Piping Conference, Seattle, WA, July 23-27.
34. Hou, Y.-C., Pan, J., and Brust, F. W., 1998, "A Fracture Analysis of Welded Pipes with Consideration of Residual Stresses," ASME PVP-Vol. 373, Fatigue, Fracture, and Residual Stresses -1998, ASME PVP Conference, San Diego, CA, July 26-30, pp. 433-437.
35. Rahman, S., et al., 1995, "Refinement and Evaluation of Crack-Opening Area Analyses for Circumferential Through-Wall Cracks in Pipes," NUREC/CR-6300, BMI-2184, U.S. Nuclear Regulatory Commission, Washington, DC.
36. Brust, F. W., 1999, "Classical and Emerging Fracture Mechanics Parameters for History Dependent Fracture with Application to Weld Fracture," ASME PVP-Vol. 393, Fracture, Fatigue and Weld Residual Stress.
37. Osage, D., Prager, M., and Dong, P., 1999, PVRC/MPC draft, Long Range Plan for Weld Residual Stress Characterization and Local Post-Weld Heat Treatment.