Creep analysis and life assessment using cross-weld specimens

International Materials Reviews

Volumn 43, Issue 6, 1998, Pages 221-242

  Hyde, T H ^a   Tang, A ^a  

^a UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CREEP TESTING; FAILURE ANALYSIS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; STRAIN; STRESS ANALYSIS;

CREEP CONTINUUM DAMAGE CONSTITUTIVE EQUATIONS;

WELDS;

EID: 0032270180     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/imr.1998.43.6.221     Document Type: Article

References (96)

1. T. ENDO and T. SAKON: Proc. Conf. on 'Engineering aspects of creep', Sheffield, UK, 1980, IMechE, Vol. 2, 95-100.
2. J. STORESUND and S.-T. TU: Int. J. Pressure Vessels Piping, 1995, 62, 179-193.
3. M. C. COLEMAN and S. T. KIMMINS: Proc. Seminar on 'Life of welds at high temperature', London, UK, June 1990, IMechE.
4. B. NATH, J. PHILLIPS, and J. A. WILLIAMS: Proc. Seminar on 'Life of welds at high temperature', London, UK, June 1990, IMechE.
5. J. STORESUND, S.-T. TU, and R. WU: Proc. Int. Symp. on 'Life and performance of high temperature materials and structures', (ed. P. Auerkari and S. Hietanen), Tallinn, Estonia, 7-8 October, 1992.
6. L. A. SAMUELSON, S.-T. TU, and J. STORESUND: in 'Mis-matching of welds: ESIS 17', (ed. K.-H. Schwalbe and M. Kocak), 845-860; 1994, London, Mechanical Engineering Publications.
7. H. J. SCHULLER, L. HAGN, and A. WOITSCHECK: Maschinenschaden, 1974, 47, 1-13.
8. J. BRETT: Proc. Conf. on 'Materials and welding technology in power plants 1994', Essen, Germany, March 1994, VGB Technische Vereinigung der Grosskraftwerksbetreiber (Association of Large Power Station Operators).
9. S.-T. TU, P. M. SEGLE, and J.-M. GONG: Int. J. Pressure Vessels Piping, 1996, 66, 171-186.
10. D. CHEETHAM, R. FIDLER, and J. A. WILLIAMS: Proc. Conf. on 'Residual stresses in welded construction and their effects', London, UK, November 1977, The Welding Institute, 145-150.
11. P. SEGLE, S.-T. TU, J. STORESUND, and L. A. SAMUELSON: Int. J. Pressure Vessels Piping, 1996, 66, 199-222.
12. L. A. SAMUELSON, P. SEGLE, J. STORESUND, and S.-T. TU: Proc. Conf. Residual Service Life 1992, Mannheim, Germany, 6-7 July 1992, Vol. 2, 32.1-32.15, VGB Technische Vereinigung der Grosskraftwerksbetreiber (Association of Large Power Station Operators).
13. S.-T. TU, P. M. SEGLE, and L. A. SAMUELSON: Proc. ASME, Pressure Vessels and Piping Division (PVP), 1993, 262, 27-34.
14. S.-T. TU, R. WU, and R. SANDSTROM: Int. J. Pressure Vessels Piping, 1994, 58, 345-354.
15. B. J. CANE: 'Collaborative programme on the correlation of test data for high temperature design of welded steam pipes', Report RD/L/2101N81, Central Electricity Generating Board, Marchwood, UK, 1981.
16. C. A. P. HORTON and J. K. LAI: Met. Sci., 1980, 14, 502-505.
17. J. D. PARKER and G. C. STRATFORD: Mater. High Temp., 1995, 13, (1), 37-45.
18. C. F. ETIENNE and J. H. HEERINGS: 'Evaluation of the influence of welding on creep resistance (strength reduction factor and lifetime reduction factor)', Doc. IX-1725-93, IIW Meeting, Cie Working Group Creep, Copenhagen, Denmark, 1993.
19. T. H. HYDE and W. SUN: J. Strain Anal., 1997, 32, 107-117.
20. T. H. HYDE, K. YEHIA, and W. SUN: J. Strain Anal., 1996, 31, 441-461.
21. T. H. HYDE, W. SUN, and A. TANG: 'An inductive procedure for determining the stresses in multi-material components under steady-state creep', submitted to J. Strain Anal. Eng. Des.
22. K. KUSSMAUL, K. MAILE, and W. ECKERT: in 'Constraint effects in fracture', STP1171, 341-360; 1993, Philadelphia, PA, ASTM.
23. M. G. NEWMAN and R. E. CRAINE: in 'Mechanics of creep brittle material - 2', (ed. A. C. F. Cocks and A. R. S. Ponter), 296-307; 1991, London, Elsevier Applied Science.
24. T. H. HYDE, A. TANG, and W. SUN: Proc. Int. Conf. on 'Integrity of high-temperature welds', November 1998, Nottingham, UK, 285-307; 1989, Bury St Edmunds, Professional Engineering Publishing.
25. D. R. HAYHURST and I. J. PERRIN: Proc. Eng. Mech., 1995, 1, 393-396.
26. T. H. HYDE, K. A. YEHIA, and A. A. BECKER: Int. J. Mech. Sci., 1993, 35, 451-462.
27. S. D. NORRIS and J. D. PARKER: Key Eng. Mater., 1993, 86-87, 17-24.
28. J. D. PARKER and J. D. JAMES: Proc. ASME, Pressure Vessels Piping Division (PVP), 1994, 279, 167-172.
29. T. H. HYDE, W. SUN, and A. TANG: Strain, Aug. 1998, 34, 83-90.
30. F. R. HALL and D. R. HAYHURST: Proc. R. Soc. Lond., 1991, A433, 383-403.
31. J. A. WILLIAMS: J. Eng. Mater. Technol. (Trans. ASME), 1982, 104, 36-40.
32. A. C. MACKENZIE: Int. J. Mech. Sci., 1968, 10, 441-453.
33. R. A. AINSWORTH: 'A rapid method for the evaluation of reference parameters for creeping structures under non-uniform temperature conditions', Report RD/B/N3985, Central Electricity Generating Board, Marchwood, UK, 1977.
34. J. K. W. BISHOP: J. Mech. Phys. Solids, 1958, 6, 132.
35. O. HOFFMAN and G. SACHS: 'Introduction to the theory of plasticity for engineers', 113-127; New York, NY, McGraw-Hill.
36. D. A. C. NICOL: Int. J. Eng. Sci., 1985, 23, 541-553.
37. A. E. GREEN, P. M. NAGHDI, and R. B. OSBORN: Int. J. Solids Structures, 1968, 4, 907.
38. D. A. C. NICOL and J. A. WILLIAMS: Res. Mech., 1985, 14, 197-223.
39. R. E. CRAINE and T. D. HAWKES: J. Strain Anal., 1993, 28, 303-309.
40. R. E. CRAINE and M. G. NEWMAN: Proc. 13th Riso Int. Symp. on Materials Science, (ed. S. I. Andersen et al.); 1992, Roskilde, Riso National Laboratory.
41. R. E. CRAINE and M. G. NEWMAN: Acta Mech., 1995, 107, 1-11.
42. R. E. CRAINE and M. G. NEWMAN: J. Strain Anal., 1996, 31, 117-124.
43. T. D. HAWKES: 'Mathematical modelling of the creep of weldments using the Cosserat theory of plates and shells', PhD thesis, University of Southampton, UK, 1989.
44. M. G. NEWMAN: 'Mathematical modelling of creep in weldments using the Cosserat theory of plates and shells', PhD thesis, University of Southampton, UK, 1993.
45. Y. N. RABOTNOV: 'Creep problems in structural members' (trans. F. A. Leckie); 1969, Amsterdam, North Holland.
46. 'FEMGEN/FEMVIEW', Femsys Ltd., Leicester, 1996.
47. 'ABAQUS: Version 5.5-1', Hibbitt, Karlsson and Sorenson Inc., Pawtucket, RI, 1996.
48. O. C. ZIENKIEWICZ and R. L. TAYLOR: 'The finite element method', 4th edn, Vol. 2, 250-253; 1991, London, McGraw-Hill.
49. M. LAW and W. PAYTEN: Int. J. Pressure Vessels Piping, 1997, 72, 45-49.
50. D. VAZDA: Int. J. Pressure Vessels Piping, 1997, 73, 119-126.
51. Y. MURAMATSU, M. YAMAZAKI, H. HONGO, and Y. MONMA: Proc. 7th Conf. on Pressure Vessel Technology, Vol. 1, 737-753; 1997, Essen, Verband der Technischen Uberwachungs-Vereine (VdTuV).
52. T. H. HYDE and W. SUN: Int. J. Mech. Sci., 1997, 39, 885-898.
53. F. ROODE, C. F. ETIENNE, and O. van ROSSUM: Proc. Conf. on 'Engineering aspects of creep', Sheffield, UK, 1980, IMechE, Vol. 2, 123-129.
54. W. SUN: 'Creep of service-aged welds', PhD thesis, University of Nottingham, UK, 1996.
55. R. W. EVANS and B. WILSHIRE: Mech. Mater., 1985, 4, 51-65.
56. H. KRAUS: 'Creep analysis'; 1980, New York, John Wiley.
57. L. A. SAMUELSON, P. SEGLE, and S.-T. TU: Proc. ASME, Pressure Vessels Piping Division (PVP), 1992, 230, 1-6.
58. M. LAW and W. PAYTEN: Int. J. Pressure Vessels Piping, 1997, 74, 129-133.
59. A. A. BECKER, T. H. HYDE, and W. SUN: 'FE-damage users manual', University of Nottingham, UK, 1994.
60. J. STORESUND, P. ANDERSSON, L. A. SAMUELSON, and P. SEGLE: Proc. CAPE '97: 4th Int. Colloq. on Ageing of Materials and Methods for the Assessment and Extension of Lifetimes of Engineering Plant, Cape Town, South Africa, April 1997, A. A. Balkema Publishers, Rotterdam.
61. S.-T. TU and R. SANDSTROM: in 'Proceedings of the 5th international conference on creep and fracture of engineering materials and structures', (ed. B. Wilshire and R. W. Evans), 695-704; 1993, London, The Institute of Materials.
62. V. BICEGO, B. BROWN, G. FEDELI, M. A. ROMAN, N. TAYLOR, and H. van WORTEL: Proc. 7th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, Irving, CA, USA, August 1997, University of California at Irving, 545-554.
63. T. H. HYDE and W. SUN: Proc. 7th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, Irving, CA, USA, August 1997, University of California at Irving, 759-768.
64. R. J. BROWNE, B. J. CANE, J. D. PARKER, and D. J. WALTERS: Proc. 1st Int. Conf. on Creep and Fracture of Engineering Materials and Structures, Swansea, 1981, University of Swansea, 645-655.
65. J. D. PARKER and A. W. J. PARSONS: Proc. ASME, Pressure Vessels Piping Division (PVP), 1994, 288, 423-428.
66. J. D. PARKER and A. W. J. PARSON: Int. J. Pressure Vessels Piping, 1995, 63, 45-54.
67. S. T. KIMMINS, N. S. WALKER, and D. J. SMITH: J. Strain Anal., 1996, 31, 125-133.
68. M. C. COLEMAN, J. D. PARKER, and D. J. WALTERS: Int. J. Pressure Vessels Piping, 1985, 18, 277-310.
69. T. H. HYDE, W. SUN, A. A. BECKER, and J. A. WILLIAMS: J. Strain Anal., 1997, 32, 273-285.
70. D. J. ALLEN: 'Type IV creep data from R66', facsimile from Dr M. C. Coleman, March 1996.
71. D. J. GOOCH and S. T. KIMMINS: in 'Proceedings of the 3rd international conference on creep and fracture of engineering materials and structures', (ed. R. W. Evans and B. Wilshire), 689-703; 1987, London, The Institute of Metals.
72. P. R. BURKE and A. A. HOWE: in 'Proceedings of the 4th international conference on creep and fracture of engineering materials and structures', (ed. R. W. Evans and B. Wilshire), 635-650; 1990, London, The Institute of Metals.
73. S. WALKER, S. T. KIMMINS, and D. J. SMITH: Proc. 6th Int. Conf. on Creep and Fatigue, Design and Life Assessment at High Temperatures, London, April 1996, IMechE, 341-350.
74. R. WU, J. STORESUND, R. SANDSTROM, and E. von WALDEN: Weld. World, 1992, 30, 329-336.
75. J. STORESUND and R. SANDSTROM: 'Influence of post weld heat treatment on the creep properties of 1Cr0.5Mo and 2.25Cr1Mo weldments', Report IM-2287, Swedish Institute for Metal Research, Stockholm, Sweden, 1988.
76. K. LAHA, K. BHANU SANKARA RAO, and S. L. MANNAN: Mater. Sci. Eng., 1990, A129, 183-195.
77. J. D. PARKER: Weld. World, 1996, 37, 233-241.
78. F. V. ELLIS and D. J. BROSCHE: Proc. ASME, Pressure Vessels Piping Division (PVP), 1993, 262, 147-156.
79. J. F. HENRY and F. V. ELLIS: Proc. ASME, Piping Vessels Piping Division (PVP), 1990, 193, 47-55.
80. F. V. ELLIS: Proc. ASME, Pressure Vessels Piping Division (PVP), 1994, 288, 165-174.
81. F. BRUHL, H. CERJAK, H. MUSCH, K. NIEDERHOFF, and M. ZSCHAU: VGB Kraftwerkstech., 1989, 69, 1074-1081.
82. B. S. GREENWELL and J. W. TAYLOR: Proc. Conf. on 'Power plants for the 1990s', 1990, IMechE, 283-296.
83. M. DeWITTE and C. COUSSEMENT: Mater. High Temp., 1991, 9, 178-184.
84. M. STEEN, M. DeWITTE, and C. COUSSEMENT: In 'Proceedings of the 4th international conference on creep and fracture of engineering materials and structures', (ed. R. W. Evans and B. Wilshire), 663-678; 1990, London, The Institute of Metals.
85. K. KUSSMAUL, K. MAILE, and H. THEOFEL: in 'Fossil power plant rehabilitation - trends in life management and reliability technology', 57-62; 1989, Materials Park, OH, ASM International.
86. M. STEEN and M. DeWITTE: Proc. Session II Conf. on 'Life assessment and extension', Hague, June 1988, 36-43.
87. B. IVARSSON and R. SANDSTROM: Met. Technol., 1980, 7, 440-448.
88. C. F. ETIENNE, O. van ROSSUM, and F. ROODE: Proc. Int. Conf. on 'Engineering aspects of creep', Sheffield, UK, 1980, IMechE, Vol. 2, 113-121.
89. S. OHTA, M. FUJIWARA, and H. UCHIDA: Proc. Int. Conf. on 'Creep', Tokyo, Japan, 14-18 April 1986, JSME, 85-90.
90. J. M. CORUM: J. Pressure Vessel Technol. (Trans. ASME), 1990, 112, 333-339.
91. S. J. BRETT: Proc. Conf. on 'Refurbishment and life extension of steam plant', 1987, IMechE, 253-260.
92. I. J. CHILTON, A. T. PRICE, and B. WILSHIRE: Met. Technol., 1984, 11, 383-391.
93. B. NATH: Bulletin, 1984, (2), 827-838.
94. M. DeWITTE, L. VERELST, and R. D. THOMAS: Proc. ASME, Pressure Vessels Piping Division (PVP), 1994, 288, 243-252.
95. B. NATH: Proc. Int. Conf. on 'Welding technology for energy applications', Gatlinburg, TN, USA, May 1982, AWS, 597.
96. B. NATH: in 4th Int. Conf. on Welding in Nuclear Engineering, Aachen, November 1982, Deutsche Verlag fuer Schweisstechnik GmbH (German Publisher for Welding Technology Ltd), Düsseldorf, 53.