Mechanical, physical, and chemical characterization of Ti-35Nb-5Zr and Ti-35Nb-10Zr casting alloys

Journal of Materials Science: Materials in Medicine

Volumn 20, Issue 8, 2009, Pages 1629-1636

  Ribeiro, Ana Lúcia Roselino ^a   Junior, Rubens Caram ^b   Cardoso, Flávia Farias ^b   Filho, Romeu Belon Fernandes ^a   Vaz, Luís Geraldo ^a  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ARC-MELTING METHODS; CASTING ALLOY; CHEMICAL CHARACTERIZATION; FRACTURE ANALYSIS; MECHANICAL CYCLING; MECHANICAL TESTS; MIXED TYPE; TENSILE TESTS; X RAY FLUORESCENCE; X- RAY DIFFRACTION;

ALLOYS; BIOCOMPATIBILITY; CERIUM ALLOYS; IMPLANTS (SURGICAL); MECHANICAL PROPERTIES; NIOBIUM; POLYMER BLENDS; SCANNING ELECTRON MICROSCOPY; STRENGTH OF MATERIALS; TENSILE STRENGTH; TENSILE TESTING; TITANIUM; TITANIUM ALLOYS; TITANIUM CASTINGS; VICKERS HARDNESS; X RAY DIFFRACTION ANALYSIS; ZIRCONIUM;

FRACTURE;

ALLOY; TITANIUM;

ARTICLE; CHEMICAL ANALYSIS; CHEMICAL COMPOSITION; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; X RAY DIFFRACTION; X RAY FLUORESCENCE;

ALLOYS; CASTS, SURGICAL; DENTAL ALLOYS; DENTAL CASTING TECHNIQUE; HARDNESS; MATERIALS TESTING; NIOBIUM; STRESS, MECHANICAL; TENSILE STRENGTH; TITANIUM; X-RAY DIFFRACTION; ZIRCONIUM;

EID: 68149101375     PISSN: 09574530     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10856-009-3737-x     Document Type: Article

References (35)

1. HS Kim WY Kim SH Lim 2006 Microstructure and elastic modulus of Ti-Nb-Si ternary alloys for biomedical applications Scr Mater 54 887 891 10.1016/j.scriptamat.2005.11.001 (Pubitemid 43038804)
2. E Kobayashi H Doi T Yoneyama H Hamanaka IR Gibson SM Best 1998 Influence of aging heat treatment on mechanical properties of biomedical Ti-Zr based ternary alloys containing niobium J Mater Sci: Mater Med 9 625 630 10.1023/A:1008927407556 (Pubitemid 28521972)
3. CM Lee CP Ju JH Chern Lin 2002 Structureûproperty relationship of cast Ti-Nb alloys J Oral Rehabil 29 314 322 10.1046/j.1365-2842.2002.00825.x (Pubitemid 41705131)
4. M Niinomi 2003 Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti-29Nb-13Ta-4.6Zr Biomaterials 24 2673 2683 10.1016/S0142-9612(03)00069-3 (Pubitemid 36444590)
5. M Niinomi 2008 Mechanical biocompatibilities of titanium alloys for biomedical applications J Mech Behav Biomed Mater 1 30 42 10.1016/j.jmbbm.2007. 07.001 (Pubitemid 47557535)
6. F Pipino 2000 The bone-prosthesis interaction J Orthop Traumatol 1 3 9
7. DA Puleo A Nanci 1999 Understanding and controlling the boneûimplant interface Biomaterials 20 2311 2321 10.1016/S0142-9612(99) 00160-X
8. M Niinomi 1998 Mechanical properties of biomedical titanium alloys Mater Sci Eng A Struct Mater 243 231 236 10.1016/S0921-5093(97)00806-X
9. M Semlitsch F Staub H Weber 1985 Titanium-aluminiumniobium alloy, development for biocompatible, high-strength surgical implants Biomed Tech (Berl) 30 334 339
10. RL Buly MH Huo E Salvati W Brien M Bansal 1992 Titanium wear debris in failed cemented total hip arthroplasty. An analysis of 7l cases J Arthroplasty 7 315 323 10.1016/0883-5403(92)90056-V
11. S Rao T Ushida T Tateishi Y Okazaki S Asao 1996 Effect of Ti, Al, and V ions on the relative growth rate of fibroblasts (L929) and osteoblasts (MC3T3-E1) cells Biomed Mater Eng 6 79 86
12. DR Sumner JO Galante 1992 Determinants of stress shielding: design versus materials versus interface Clin Orthop Relat Res 274 202 212
13. K Wang 1996 The use of titanium for medical applications in the USA Mater Sci Eng A Struct Mater 213 134 137 10.1016/0921-5093(96)10243-4 (Pubitemid 126394529)
14. M Niinomi 2002 Recent metallic materials for biomedical applications Metall Trans-A 33 477 486
15. LM Elias SG Schneider S Schneider HM Silva F Malvisi 2006 Microstructural and mechanical characterization of biomedical Ti-Nb-Zr(-Ta) alloys Mater Sci Eng A Struct Mater 432 108 112 10.1016/j.msea.2006.06.013 (Pubitemid 44307909)
16. PL Ferrandini FF Cardoso SA Souza CR Afonso R Caram 2007 Aging response of the Ti 35Nb 7Zr 5Ta and Ti 35Nb 7Ta alloys J Alloy Compd 433 207 210 10.1016/j.jallcom.2006.06.094 (Pubitemid 46412956)
17. M Niinomi T Hattori K Morikawa T Kasuga A Suzuki H Fukui 2002 Development of low rigidity β-type titanium alloy for biomedical applications Mater Trans 43 2970 2977 10.2320/matertrans.43.2970
18. S Schneider SG Schneider HM Silva C Moura Neto 2005 Study of the non-linear stress-strain behavior in Ti-Nb-Zr alloys Mater Res 8 435 438 10.1590/S1516-14392005000400013
19. R Godley D Starosvetsky I Gotman 2006 Corrosion behavior of a low modulus β-Ti-45%Nb alloy for use in medical implants J Mater Sci: Mater Med 17 63 67 10.1007/s10856-006-6330-6 (Pubitemid 43042229)
20. V Oliveira RR Chaves R Bertazzoli R Caram 1998 Preparation and characterization of Ti-Al-Nb orthopedic implants Braz J Chem Eng 15 326 333 10.1590/S0104-66321998000400002
21. IC Lavos-Valereto B Konig Jr C Rossa Jr E Marcantonio Jr AC Zavaglia 2001 A study of histological responses from Ti-6Al-7Nb alloy dental implants with and without plasma-sprayed hydroxyapatite coating in dogs J Mater Sci: Mater Med 12 273 276 10.1023/A:1008975418453 (Pubitemid 32207083)
22. FA Müller MC Bottino L Müller VAR Henriques U Lohbauer AHA Bressiani 2008 In vitro apatite formation on chemically treated (P/M) Ti-13Nb-13Zr Dent Mater 24 50 56 10.1016/j.dental.2007.02.005 (Pubitemid 350250808)
23. Y Okasaki E Gotoh 2005 Comparison of metal release from various metallic biomaterials in vivo Biomaterials 26 11 21 10.1016/j.biomaterials.2004.02.005 (Pubitemid 38759469)
24. Y Okasaki E Gotoh T Manabe K Kobayashi 2004 Comparison of metal concentrations in rat tibia tissues with various metallic implants Biomaterials 25 5913 5920 10.1016/j.biomaterials.2004.01.064 (Pubitemid 38747013)
25. ASTM E 606. Standard practice for strain-controlled fatigue testing (West Conshohocken, ASTM, 2005).
26. ASTM E 8M Standard test methods for tension testing of metallic materials [metric] (West Conshohocken, ASTM, 2004).
27. ASM handbook. Fractography (Ohio, ASM International, 1987).
28. X Tang T Ahmed HJ Rack 2000 Phase transformations in Ti-Nb-Ta and Ti-Nb-Ta-Zr alloys J Mater Sci 35 1805 1811 10.1023/A:1004792922155 (Pubitemid 30589874)
29. AV Dobromyslov VA Elkin 2001 Martensitic transformation and metastable alloys with d-metals of 4-6 periods Scr Mater 44 905 910 10.1016/S1359-6462(00) 00694-1 (Pubitemid 32297542)
30. JI Kim HY Kim T Inamura H Hosoda S Miyazaki 2005 Shape memory characteristics of Ti-22Nb-(2-8)Zr(at.%) biomedical alloys Mater Sci Eng A Struct Mater 403 334 339 10.1016/j.msea.2005.05.050 (Pubitemid 41114741)
31. DL Moffat DC Larbalestier 1988 The competition between the alpha and omega phases in aged Ti-Nb alloys Metall Trans-A 19 1687 1694
32. M Geetha AK Singh AK Gogia R Asokamani 2004 Effect of thermomechanical processing on evolution of various phases in Ti-Nb-Zr thermomechanical processing on evolution of various phases in Ti-Nb-Zr J Alloy Compd 384 131 144 10.1016/j.jallcom.2004.04.113
33. ASM handbook. Materials Characterization (Ohio, ASM International, 1986).
34. CW Lin CP Ju JHC Lin 2005 A comparison of the fatigue behavior of cast Ti-7.5Mo with c.p. titanium, Ti-6Al-4V and Ti-13Nb-13Zr alloys Biomaterials 26 2899 2907 10.1016/j.biomaterials.2004.09.007 (Pubitemid 39647226)
35. Brooks CR, Choushury A. Metallurgical failure analysis. New York: McGraw-Hill; 1993.