Ceramic laminates by gelcasting

International Journal of Applied Ceramic Technology

Volumn 6, Issue 5, 2009, Pages 593-606

  Shanti, Noah O ^a   Hovis, David B ^a,b   Seitz, Michelle E ^a   Montgomery, John K ^a,c   Baskin, Donald M ^a,d   Faber, Katherine T ^a  

^a Northwestern University   (United States)

^b Case Western Reserve University   (United States)

^c EXXONMOBIL UPSTREAM RESEARCH COMPANY   (United States)

^d CENTRO RICERCHE FIAT   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BARIUM HEXAFERRITES; CERAMIC LAMINATES; CUSTOMIZABLE; GEL-CASTING; GELCASTING TECHNIQUE; IRON TITANATE; LAMINATE DESIGN; LAMINATED CERAMIC COMPOSITES; NEAR-NET-SHAPE; THERMAL AND MECHANICAL PROPERTIES;

BARIUM; CERAMIC MATERIALS; LAMINATED COMPOSITES; MECHANICAL PROPERTIES;

BARIUM TITANATE;

EID: 67650052492     PISSN: 1546542X     EISSN: 17447402     Source Type: Journal    
DOI: 10.1111/j.1744-7402.2008.02312.x     Document Type: Review

References (96)

1. H. M. Chan, "Layered Ceramics: Processing and Mechanical Behavior," Annu. Rev. Mater. Sci., 27 249-282 (1997).
2. J. Dusza and M. Steen, "Fractography and Fracture Mechanics Property Assessment of Advanced Structural Ceramics," Int. Mater. Rev., 44 [5] 165-216 (1999).
3. B. R. Lawn, Y. Deng, P. Miranda, A. Pajares, H. Chai, and D. K. Kim, "Overview: Damage in Brittle Layer Structures from Concentrated Loads," J. Mater. Res., 17 [12] 3019-3036 (2002).
4. G. S. Was and T. Foecke, "Deformation and Fracture in Microlaminates," Thin Solid Films, 286 [1-2] 1-31 (1996).
5. W. M. Sigmund, N. S. Bell, and L. Bergstrom, "Novel Powder-Processing Methods for Advanced Ceramics," J. Am. Ceram. Soc., 83 [7] 1557-1574 (2000).
6. J. R. G. Evans, "Seventy Ways to Make Ceramics," J. Eur. Ceram. Soc., 28 [7] 1421-1432 (2008).
7. A. C. Young, O. O. Omatete, M. A. Janney, and P. A. Menchhofer, "Gelcasting of Alumina," J. Am. Ceram. Soc., 74 [3] 612-618 (1991).
8. 3 and Evaluation of Green Strength," Ceram. Int., 26 [3] 251-254 (2000).
9. M. A. Janney, O. O. Omatete, C. A. Walls, S. D. Nunn, R. J. Ogle, and G. Westmoreland, "Development of Low-Toxicity Gelcasting Systems," J. Am. Ceram. Soc., 81 [3] 581-591 (1998).
10. K. Cai, Y. Huang, and J. L. Yang, "Gelcasting of Alumina with Low-Toxicity HEMA System," J. Inorg. Mater., 18 [2] 343-347 (2003).
11. K. Cai, Y. Huang, and J. L. Yang, "Alumina Gelcasting by Using HEMA System," J. Eur. Ceram. Soc., 25 [7] 1089-1093 (2005).
12. Y. Zhang and Y. B. Cheng, "Use of HEMA in Gelcasting of Ceramics: A Case Study on Fused Silica," J. Am. Ceram. Soc., 89 [9] 2933-2935 (2006).
13. K. Prabhakaran and C. Pavithran, "Gelcasting of Alumina from Acidic Aqueous Medium Using Acrylic Acid," J. Eur. Ceram. Soc., 20 [8] 1115-1119 (2000).
14. M. A. Huha and J. A. Lewis, "Polymer Effects on the Chemorheological and Drying Behavior of Alumina-Poly(Vinyl Alcohol) Gelcasting Suspensions," J. Am. Ceram. Soc., 83 [8] 1957-1963 (2000).
15. S. L. Morissette and J. A. Lewis, "Chemorheology of Aqueous-Based Alumina-Poly(Vinyl Alcohol) Gelcasting Suspensions," J. Am. Ceram. Soc., 82 [3] 521-528 (1999).
16. S. L. Morissette, J. A. Lewis, J. Cesarano, D. B. Dimos, and T. Y. Baer, "Solid Freeform Fabrication of Aqueous Alumina-Poly(Vinyl Alcohol) Gelcasting Suspensions," J. Am. Ceram. Soc., 83 [10] 2409-2416 (2000).
17. J. T. Ma, Z. P. Xie, H. Z. Miao, Y. Huang, and Y. B. Cheng, "Inhibitive Role and Mechanism of Water-Soluble Polymer PVP on the Surface-Exfoliation Problem of Ceramic Green Bodies Prepared by Gelcasting," J. Inorg. Mater., 17 [3] 480-488 (2002).
18. Z. P. Xie, J. T. Ma, H. Z. Miao, Y. Huang, and Y. B. Cheng, "Suppression of Surface-Exfoliation by Gelcasting Ceramics with Mixed Polymer-Monomer Solutions," High-Performance Ceramics 2001, Vol. 224-226, Key Engineering Materials. eds.,
19. J. Gong and W. Pan. Trans Tech Publication, Zurich, 2002, 657-662.
20. J. K. Montgomery, A. S. Botha, P. L. Drzal, K. R. Shull, and K. T. Faber, "A Thermoreversible Gelcasting Technique for Ceramic Laminates," Scr. Mater., 48 [6] 785-789 (2003).
21. J. K. Montgomery, P. L. Drzal, K. R. Shull, and K. T. Faber, "Thermoreversible Gelcasting: A Novel Ceramic Processing Technique," J. Am. Ceram. Soc., 85 [5] 1164-1168 (2002).
22. P. L. Drzal and K. R. Shull, "Origins of Mechanical Strength and Elasticity in Thermally Reversible, Acrylic Triblock Copolymer Gels," Macromolecules, 36 [6] 2000-2008 (2002).
23. M. E. Seitz, W. R. Burghardt, K. T. Faber, and K. R. Shull, "Self-Assembly and Stress Relaxation in Acrylic Triblock Copolymer Gels," Macromolecules, 40 [4] 1218-1226 (2007).
24. E. Adolfsson, "Gelcasting of Zirconia Using Agarose," J. Am. Ceram. Soc., 89 [6] 1897-1902 (2006).
25. A. J. Millán, R. Moreno, and M. I. Nieto, "Thermogelling Polysaccharides for Aqueous Gelcasting-Part 1: A Comparative Study of Gelling Additives," J. Eur. Ceram. Soc., 22 [13] 2209-2215 (2002).
26. S. M. Olhero, G. Tari, M. A. Coimbra, and J. M. F. Ferreira, "Synergy of Polysaccharide Mixtures in Gelcasting of Alumina," J. Eur. Ceram. Soc., 20 [4] 423-429 (2000).
27. A. J. Fanelli, R. D. Silvers, W. S. Frei, J. V. Burlew, and G. B. Marsh, "New Aqueous Injection Molding Process for Ceramic Powders," J. Am. Ceram. Soc., 72 [10] 1833-1836 (1989).
28. I. Santacruz, M. I. Nieto, and R. Moreno, "Rheological Characterization of Synergistic Mixtures of Carrageenan and Locust Bean Gum for Aqueous Gelcasting of Alumina," J. Am. Ceram. Soc., 85 [10] 2432-2436 (2002).
29. E. Gregorová, W. Pabst, and J. Stetina, "Viscoelastic Behavior of Ceramic Suspensions with Carrageenan," J. Eur. Ceram. Soc., 26 [7] 1185-1194 (2006).
30. Y. Jia, Y. Kanno, and Z. P. Xie, "New Gel-Casting Process for Alumina Ceramics Based on Gelation of Alginate," J. Eur. Ceram. Soc., 22 [12] 1911-1916 (2002).
31. I. Santacruz, C. Baudin, R. Moreno, and M. I. Nieto, "Improved Green Strength of Ceramics through Aqueous Gelcasting," Adv. Eng. Mater., 6 [8] 672-676 (2004).
32. M. E. Seitz, K. R. Shull, and K. T. Faber, "Acrylic Triblock Copolymer Design for Thermoreversible Gelcasting of Ceramics: Rheological and Green Body Properties," unpublished work.
33. C. Hillman, Z. G. Suo, and F. F. Lange, "Cracking of Laminates Subjected to Biaxial Tensile Stresses," J. Am. Ceram. Soc., 79 [8] 2127-2133 (1996).
34. I. A. Gee, R. S. Dobedoe, R. Vann, M. H. Lewis, G. Blugan, and J. Kuebler, "Enhanced Fracture Toughness by Ceramic Laminate Design," Adv. Appl. Ceram., 104 [3] 103-109 (2005).
35. M. Finot and S. Suresh, "Small and Large Deformation of Thick and Thin-Film Multi-Layers: Effect of Layer Geometry, Plasticity and Compositional Gradients," J. Mech. Phys. Solids, 44 [5] 683-721 (1996).
36. Y. L. Shen and S. Suresh, "Steady-State Creep of Metal-Ceramic Multilayered Materials," Acta Mater., 44 [4] 1337-1348 (1996).
37. S. Suresh, "Modeling and Design of Multi-Layered and Graded Materials," Prog. Mater. Sci., 42 [1-4] 243-251 (1997).
38. S. Suresh, A. E. Giannakopoulos, and M. Olsson, "Elastoplastic Analysis of Thermal Cycling-Layered Materials with Sharp Interfaces," J. Mech. Phys. Solids, 42 [6] 979-1018 (1994).
39. S. Suresh and A. Mortensen, "Functionally Graded Metals and Metal-Ceramic Composites. 2. Thermomechanical Behaviour," Int. Mater. Rev., 42 [3] 85-116 (1997).
40. P. Vena, "Thermal Residual Stresses in Graded Ceramic Composites: A Microscopic Computational Model Versus Homogenized Models," Meccanica, 40 [2] 163-179 (2005).
41. J. T. Drake, R. L. Williamson, and B. H. Rabin, "Finite Element Analysis of Thermal Residual Stresses at Graded Ceramic-Metal Interfaces. Part II. Interface Optimization for Residual Stress Reduction," J. Appl. Phys., 74 [2] 1321-1326 (1993).
42. R. L. Williamson, B. H. Rabin, and J. T. Drake, "Finite-Element Analysis of Thermal Residual-Stresses at Graded Ceramic-Metal Interfaces. 1. Model Description and Geometrical Effects," J. Appl. Phys., 74 [2] 1310-1320 (1993).
43. M.-Y. He and J. W. Hutchinson, "Crack Deflection at an Interface between Dissimilar Elastic Materials," Int. J. Solids Struct., 25 [9] 1053-67 (1989).
44. D. Leguillon, C. Lacroix, and E. Martin, "Crack Deflection by an Interface-Asymptotics of the Residual Thermal Stresses," Int. J. Solids Struct., 38 [42-43] 7423-7445 (2001).
45. E. Martin, D. Leguillon, and C. Lacroix, "A Revisited Criterion for Crack Defection at an Interface in a Brittle Bimaterial," Compos. Sci. Technol., 61 [12] 1671-1679 (2001).
46. D. Leguillon, C. Lacroix, and E. Martin, "Interface Debonding Ahead of a Primary Crack," J. Mech. Phys. Solids, 48 [10] 2137-2161 (2000).
47. D. Leguillon, S. Tariolle, E. Martin, T. Chartier, and J. L. Besson, "Prediction of Crack Deflection in Porous/Dense Ceramic Laminates," J. Eur. Ceram. Soc., 26 [3] 343-349 (2006).
48. M. Y. He, A. G. Evans, and J. W. Hutchinson, "Crack Deflection at an Interface between Dissimilar Elastic Materials: Role of Residual Stresses," Int. J. Solids Struct., 31 [24] 3443-3455 (1994).
49. S. Ho, C. Hillman, F. F. Lange, and Z. Suo, "Surface Cracking in Layers Under Biaxial, Residual Compressive Stress," J. Am. Ceram. Soc., 78 [9] 2353-2359 (1995).
50. M. Oechsner, C. Hillman, and F. F. Lange, "Crack Bifurcation in Laminar Ceramic Composites," J. Am. Ceram. Soc., 79 [7] 1834-1838 (1996).
51. D. M. Baskin, M. H. Zimmerman, K. T. Faber, and E. R. Fuller, "Forming Single-Phase Laminates via the Gelcasting Technique," J. Am. Ceram. Soc., 80 [11] 2929-2932 (1997).
52. S. Ho and Z. Suo, "Tunneling Cracks in Constrained Layers," J. Appl. Mech.-T. ASME, 60 [4] 890-894 (1993).
53. W. J. Clegg, K. Kendall, N. M. Alford, T. W. Button, and J. D. Birchall, "A Simple Way to Make Tough Ceramics," Nature, 347 [6292] 455-457 (1990).
54. K. S. Blanks, A. Kristoffersson, E. Carström, and W. J. Clegg, "Crack Deflection in Ceramic Laminates Using Porous Interlayers," J. Eur. Ceram. Soc., 18 1945-1951 (1998).
55. S. Kamat, X. Su, R. Ballarini, and A. H. Heuer, "Structural Basis for the Fracture Toughness of the Shell of the Conch Strombus gigas," Nature, 405 1036-1040 (2000).
56. Christian and P. J. A. Kenis, "Fabrication of Ceramic Microscale Structures," J. Am. Ceram. Soc., 90 [9] 2779-2783 (2007).
57. J. Moon, C. W. Kang, and S. Y. Cho, "Microtransfer Molding of Gelcasting Suspensions to Fabricate Barrier Ribs for Plasma Display Panel," J. Am. Ceram. Soc., 86 [11] 1969-1972 (2003).
58. M. A. Janney, S. D. Nunn, C. A. Walls, O. O. Omatete, R. J. Ogle, G. H. Kirby, and A. D. McMillan, "Gelcasting," http:// www.ms.ornl.gov/researchgroups/process/cpg/gelpubs/GelChap.pdf, 1998, accessed on September 25, 2008.
59. "Escalt Ceramic Barrier Film," http://keepsafe.ca/escal.shtml, accessed on April 2, 2008.
60. R. A. Wessling, D. S. Gibbs, B. E. Obi, D. E. Beyer, P. T. DeLassus, and B. A. Howell, "Vinylidene Chloride Monomer and Polymers," Kirk-Othmer Encyclopedia of Chemical Technology, 4th Edition, Vol. 24. eds., R. E. Kirk, D. F. Othmer, J. I. Kroschwitz, and M. Howe-Grant. John Wiley & Sons, New York, 882-923, 1997.
61. N. S. Sangaj and V. C. Malshe, "Permeability of Polymers in Protective Organic Coatings," Prog. Org. Coat., 50 [1] 28-39 (2004).
62. "Delrin Acetal Resin," http://plastics.dupont.com/plastics/ pdflit/americas/delrin/230323c.pdf, accessed on June 11, 2008.
63. W. J. Koros, M. R. Coleman, and D. R. B. Walker, "'Controlled Permeability Polymer Membranes," Annu. Rev. Mater. Sci., 22 47-89 (1992).
64. H.-X. Rao, F.-N. Liu, and Z.-Y. Zhang, "Preparation and Oxygen/ Nitrogen Permeability of PDMS Crosslinked Membrane and PDMS/ Tetraethoxysilicone Hybrid Membrane," J. Membr. Sci., 303 [1-2] 132-139 (2007).
65. M. Ohyanagi, H. Nishide, K. Suenaga, and E. Tsuchida, "Oxygen-Permselectivity in New Type Polyorganosiloxanes with Carboxyl Group on the Side-Chain," Polym. Bull., 23 [6] 637-642 (1990).
66. J. K. Montgomery and K. T. Faber, "Processing and Surface Flaw Tolerance of Alumina Bilayers," J. Am. Ceram. Soc., 88 [2] 287-292 (2005).
67. J. K. Montgomery and K. T. Faber, "Processing of Stepped-Density Alumina via Gelcasting and Reaction Bonding Techniques," Scr. Mater., 42 283-287 (2000).
68. D. B. Hovis, "Designed Microstructures in Textured Barium Hexaferrite," Ph.D. Thesis, Materials Science and Engineering, Northwestern University, Evanston, IL, 2004.
69. D. M. Baskin, "Fracture Behavior of Single Phase Iron Titanate Laminate Composites," Ph.D. Thesis, Materials Science and Engineering, Northwestern University, Evanston, IL, 1999.
70. J. K. Montgomery, "Processing and Mechanical Characterization of Alumina Laminates," Ph.D. Thesis, Materials Science and Engineering, Northwestern University, Evanston, IL, 2002.
71. G. W. Scherer, "Theory of Drying," J. Am. Ceram. Soc., 73 [1] 3-14 (1990).
72. O. O. Omatete, R. A. Strehlow, and C. A. Walls, "Drying of Gelcast Ceramics," Forming Science and Technology for Ceramics. Vol. 26, Ceramic Transactions. ed., M. J. Cima. American Ceramic Society, Westerville, OH, 101-107, 1992.
73. S. Ghosal, A. Emami-Naeini, Y. P. Harn, B. S. Draskovich, and J. P. Pollinger, "A Physical Model for the Drying of Gelcast Ceramics," J. Am. Ceram. Soc., 82 [3] 513-520 (1999).
74. C. G. Ha, Y. G. Jung, J. W. Kim, C. Y. Jo, and U. Paik, "Effect of Particle Size on Gelcasting Process and Green Properties in Alumina," Mater. Sci. Eng., A, 337 [1-2] 212-221 (2002).
75. K. Prabhakaran, N. R. Babu, S. R. Kumar, and K. G. Warrier, " Freeform Gelcasting of Porous Tubular Alumina Substrate, "J. Am. Ceram. Soc., 85 [12] 3126-3128 (2002).
76. R. F. Chen, C. A. Wang, Y. Huang, L. G. Ma, and W. Y. Lin, "Ceramics with Special Porous Structures Fabricated by Freeze-Gelcasting: Using Tert-Butyl Alcohol as a Template" J. Am. Ceram. Soc., 90 3478-3484 (2007).
77. K. Araki and J. W. Halloran, "New Freeze-Casting Technique for Ceramics with Sublimable Vehicles," J. Am. Ceram. Soc., 87 [10] 1859-1863 (2004).
78. K. Araki and J. W. Halloran, "Porous Ceramic Bodies with Interconnected Pore Channels by a Novel Freeze Casting Technique," J. Am. Ceram. Soc., 88 [5] 1108-1114 (2005).
79. N. O. Shanti, K. Araki, and J. W. Halloran, "Particle Redistribution During Dendritic Solidification of Particle Suspensions," J. Am. Ceram. Soc., 89 [8] 2444-2447 (2006).
80. A. Barati, M. Kokabi, and M. H. N. Famili, "Drying of Gelcast Ceramic Parts via the Liquid Desiccant Method," J. Eur. Ceram. Soc., 23 [13] 2265-2272 (2003).
81. A. Barati, M. Kokabi, and N. Famili, "Modeling of Liquid Desiccant Drying Method for Gelcast Ceramic Parts," Ceram. Int., 29 [2] 199-207 (2003).
82. J. O. Kiggans and M. A. Janney, Green Particulate Article Drying Method-by Contacting an Article Comprising a Particulate Material and a Pore-Phase Material Containing a Solvent with a Liquid Dessicant, U.S. Patent 5,885,493.
83. D. J. Buckley and M. Berger, "Swelling of Polymer Systems in Solvents. 2. Mathematics of Diffusion," J. Polym. Sci., 56 [163] 175-188 (1962).
84. G. Rossi and K. A. Mazich, "Macroscopic Description of the Kinetics of Swelling for a Cross-Linked Elastomer or a Gel," Phys. Rev. E, 48 [2] 1182-1191 (1993).
85. T. Tanaka and D. J. Fillmore, "Kinetics of Swelling of Gels," J. Chem. Phys., 70 [3] 1214-1218 (1979).
86. M. N. Rahaman, Ceramic Processing and Sintering, Marcel Dekker, New York, 1995.
87. H. Su and D. L. Johnson, "Master Sintering Curve: A Practical Approach to Sintering," J. Am. Ceram. Soc., 79 [12] 3211-3217 (1996).
88. J. C. Chang and J. H. Jean, "Camber Development During the Cofiring of Bi-Layer Glass-Based Dielectric Laminate," J. Am. Ceram. Soc., 88 [5] 1165-1170 (2005).
89. J. H. Jean, C. R. Chang, and Z. C. Chen, "Effect of Densification Mismatch on Camber Development During Cofiring of Nickel-Based Multilayer Ceramic Capacitors," J. Am. Ceram. Soc., 80 [9] 2401-2406 (1997).
90. G. Q. Lu, R. C. Sutterlin, and T. K. Gupta, "Effect of Mismatched Sintering Kinetics on Camber in a Low-Temperature Cofired Ceramic Package," J. Am. Ceram. Soc., 76 [8] 1907-1914 (1993).
91. S.-H. Lee, G. L. Messing, and M. Awano, "Sintering Arches for Cosintering Camber-Free SOFC Multilayers," J. Am. Ceram. Soc., 91 [2] 421-427 (2008).
92. A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, "Mechanisms Controlling the Durability of Thermal Barrier Coatings," Prog. Mater. Sci., 46 [5] 505-553 (2001).
93. M. H. Zimmerman, K. T. Faber, and E. R. Fuller, "Forming Textured Microstructures via the Gelcasting Technique," J. Am. Ceram. Soc., 80 [10] 2725-2729 (1997).
94. M. H. Zimmerman, D. M. Baskin, K. T. Faber, E. R. Fuller, A. J. Allen, and D. T. Keane, "Fracture of a Textured Anisotropic Ceramic," Acta Mater., 49 [16] 3231-3242 (2001).
95. J. Went, G. W. Rathenau, E. W. Gortner, and G. W. van Oosterhout, "Ferroxdure, a Class of New Permanent Magnet Materials," Philips Tech. Rev., 13 [7] 194-208 (1952).
96. D. B. Hovis, K. T. Faber, and E. A. Kenik, "Texture and Microstructural Development in Gelcast Barium Hexaferrite," J. Mater. Sci., 43 1836-1843 (2008).