메뉴 건너뛰기




Volumn 27, Issue 5, 2009, Pages 892-899

Surface integrity and material removal mechanisms associated with the EDM of Al2O3 ceramic composite

Author keywords

Al2O3 ceramic composite; EDM; Material removal mechanism; Surface integrity

Indexed keywords

ADVANCED CERAMICS; AL2O3 CERAMIC COMPOSITE; CERAMIC COMPOSITES; CONDUCTIVE CERAMICS; EDM; ELECTRICAL DISCHARGES; INDUCED DAMAGE; MACHINED COMPONENTS; MACHINING CHARACTERISTICS; MACHINING COMPLEX; MATERIAL REMOVAL; MATERIAL REMOVAL MECHANISM; MATERIAL REMOVAL MECHANISMS; REAL APPLICATIONS; SEM; STRENGTH DEGRADATION; SUB-SURFACE DAMAGE; SURFACE INTEGRITY;

EID: 67649601504     PISSN: 02634368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijrmhm.2009.05.003     Document Type: Article
Times cited : (90)

References (24)
  • 1
    • 39749151614 scopus 로고    scopus 로고
    • Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding
    • Agarwal S., and Rao P.V. Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding. Int J Mach Tools Manuf 48 (2008) 698-710
    • (2008) Int J Mach Tools Manuf , vol.48 , pp. 698-710
    • Agarwal, S.1    Rao, P.V.2
  • 3
    • 0030781823 scopus 로고    scopus 로고
    • Study on the electro-discharge machining of hot pressed aluminium oxide based ceramics
    • Zhang J.H., Lee T.C., and Lau W.S. Study on the electro-discharge machining of hot pressed aluminium oxide based ceramics. J Mater Proc Tech 63 (1997) 908-912
    • (1997) J Mater Proc Tech , vol.63 , pp. 908-912
    • Zhang, J.H.1    Lee, T.C.2    Lau, W.S.3
  • 5
  • 9
    • 0037051734 scopus 로고    scopus 로고
    • Surface integrity and modification of electro-discharge machined alumina-based ceramic composite
    • Zhang J.H., Lee T.C., Lu C.L., and Tang C.Y. Surface integrity and modification of electro-discharge machined alumina-based ceramic composite. J Mater Proc Tech 123 (2002) 75-79
    • (2002) J Mater Proc Tech , vol.123 , pp. 75-79
    • Zhang, J.H.1    Lee, T.C.2    Lu, C.L.3    Tang, C.Y.4
  • 10
    • 0036532857 scopus 로고    scopus 로고
    • Mechanical surface treatment of electro-discharge machined (EDMed) ceramic composite for improved strength and reliability
    • Lee T., and Deng J. Mechanical surface treatment of electro-discharge machined (EDMed) ceramic composite for improved strength and reliability. J Eur Ceram Soc 22 (2002) 545-550
    • (2002) J Eur Ceram Soc , vol.22 , pp. 545-550
    • Lee, T.1    Deng, J.2
  • 13
    • 0039173037 scopus 로고    scopus 로고
    • Material removal by spalling during EDM of ceramics
    • Trueman C.S., and Huddleston J. Material removal by spalling during EDM of ceramics. J Eur Ceram Soc 20 (2000) 1629-1635
    • (2000) J Eur Ceram Soc , vol.20 , pp. 1629-1635
    • Trueman, C.S.1    Huddleston, J.2
  • 14
    • 2942521110 scopus 로고    scopus 로고
    • Investigation of material removal mechanism in EDM of composite ceramic materials
    • Lauwers B., Kruth J.P., Liu W., Eeraerts W., Schacht B., and Bleys P. Investigation of material removal mechanism in EDM of composite ceramic materials. J Mater Proc Tech 49 (2004) 347-352
    • (2004) J Mater Proc Tech , vol.49 , pp. 347-352
    • Lauwers, B.1    Kruth, J.P.2    Liu, W.3    Eeraerts, W.4    Schacht, B.5    Bleys, P.6
  • 16
    • 17944377909 scopus 로고    scopus 로고
    • Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric
    • Wu K.L., Yan B.H., Huang F.Y., and Chen S.C. Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric. Int J Mach Tools Manuf 45 (2005) 1195-1201
    • (2005) Int J Mach Tools Manuf , vol.45 , pp. 1195-1201
    • Wu, K.L.1    Yan, B.H.2    Huang, F.Y.3    Chen, S.C.4
  • 17
    • 0017271943 scopus 로고
    • Contribution to the micro-analysis of the spark eroded surfaces
    • Roethel F., Kosec L., Garbajs V., and Peklenik J. Contribution to the micro-analysis of the spark eroded surfaces. Ann CIRP 25 (1976) 135-140
    • (1976) Ann CIRP , vol.25 , pp. 135-140
    • Roethel, F.1    Kosec, L.2    Garbajs, V.3    Peklenik, J.4
  • 18
    • 34447297032 scopus 로고    scopus 로고
    • Effect of machining parameters on surface textures in EDM of Fe-Mn-Al alloy
    • Guu Y.H., and Hou M.T.-K. Effect of machining parameters on surface textures in EDM of Fe-Mn-Al alloy. Mater Sci Eng A 466 (2007) 61-67
    • (2007) Mater Sci Eng A , vol.466 , pp. 61-67
    • Guu, Y.H.1    Hou, M.T.-K.2
  • 19
    • 0141890027 scopus 로고    scopus 로고
    • Relationship between EDM parameters and surface crack formation
    • Lee H.T., and Tai T.Y. Relationship between EDM parameters and surface crack formation. J Mater Proc Tech 142 (2003) 676-683
    • (2003) J Mater Proc Tech , vol.142 , pp. 676-683
    • Lee, H.T.1    Tai, T.Y.2
  • 20
    • 0038449887 scopus 로고    scopus 로고
    • Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide
    • Lee S.H., and Li X.P. Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide. J Mater Proc Tech 139 (2003) 315-321
    • (2003) J Mater Proc Tech , vol.139 , pp. 315-321
    • Lee, S.H.1    Li, X.P.2
  • 21
    • 56249110102 scopus 로고    scopus 로고
    • Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks
    • Tai T.Y., and Lu S.J. Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks. Int J Fatigue 31 (2009) 433-438
    • (2009) Int J Fatigue , vol.31 , pp. 433-438
    • Tai, T.Y.1    Lu, S.J.2
  • 22
    • 0026743416 scopus 로고
    • Crack susceptibility of electro-discharge machined surfaces
    • Lee L.C., Lim L.C., Wong Y.S., and Fong H.S. Crack susceptibility of electro-discharge machined surfaces. J Mater Proc Tech 29 (1992) 213-221
    • (1992) J Mater Proc Tech , vol.29 , pp. 213-221
    • Lee, L.C.1    Lim, L.C.2    Wong, Y.S.3    Fong, H.S.4
  • 23
    • 34147171717 scopus 로고    scopus 로고
    • Electro-discharge machining performance of TiCN-based cermets
    • Manoj Kumar B.V., Ramkumar J., Basu B., and Kang S. Electro-discharge machining performance of TiCN-based cermets. Int J Refract Met 25 (2007) 293-299
    • (2007) Int J Refract Met , vol.25 , pp. 293-299
    • Manoj Kumar, B.V.1    Ramkumar, J.2    Basu, B.3    Kang, S.4
  • 24
    • 67649602795 scopus 로고    scopus 로고
    • .


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.