HipMatch: An object-oriented cross-platform program for accurate determination of cup orientation using 2D-3D registration of single standard X-ray radiograph and a CT volume

Computer Methods and Programs in Biomedicine

Volumn 95, Issue 3, 2009, Pages 236-248

  Zheng, Guoyan ^a   Zhang, Xuan ^a   Steppacher, Simon D ^b,c   Murphy, Stephen B ^c   Siebenrock, Klaus A ^b   Tannast, Moritz ^b  

^a UNIVERSITY OF BERN   (Switzerland)

^b UNIVERSITY OF BERN   (Switzerland)

^c TUFTS UNIVERSITY   (United States)

Author keywords

2D 3D registration; C++; Intensity based registration; Iterative landmark to ray registration; Object oriented; Post operative cup alignment; Radiograph

Indexed keywords

2D-3D REGISTRATION; C++; INTENSITY-BASED REGISTRATION; ITERATIVE LANDMARK-TO-RAY REGISTRATION; OBJECT-ORIENTED; POST-OPERATIVE CUP ALIGNMENT; RADIOGRAPH;

ALIGNMENT; COMPUTER AIDED DESIGN; COMPUTER SOFTWARE; IMAGE REGISTRATION; PROSTHETICS; QUALITY CONTROL; RADIOGRAPHY; THREE DIMENSIONAL;

OBJECT ORIENTED PROGRAMMING;

ACCURACY; ANTERIOR POSTERIOR AXIS; ARTICLE; BONE STRUCTURE; CALIBRATION; COMPUTER INTERFACE; COMPUTER PROGRAM; HIP RADIOGRAPHY; IMAGE RECONSTRUCTION; MATHEMATICAL MODEL; PELVIS RADIOGRAPHY; PROSTHESIS; THREE DIMENSIONAL IMAGING; TWO DIMENSIONAL IMAGING;

ACETABULUM; ARTHROPLASTY, REPLACEMENT, HIP; EQUIPMENT FAILURE ANALYSIS; HIP JOINT; HIP PROSTHESIS; HUMANS; RADIOGRAPHIC IMAGE INTERPRETATION, COMPUTER-ASSISTED; REPRODUCIBILITY OF RESULTS; SENSITIVITY AND SPECIFICITY; SOFTWARE; SUBTRACTION TECHNIQUE; SURGERY, COMPUTER-ASSISTED; TOMOGRAPHY, X-RAY COMPUTED; USER-COMPUTER INTERFACE;

EID: 67649410206     PISSN: 01692607     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cmpb.2009.02.009     Document Type: Article

References (26)

1. Thomas T., Handel M., Herold T., Perlick L., Paetzel C., and Grifka J. Position of the acetabular cup-accuracy of radiographic calculation compared to CT-based measurement. Eur. J. Radiol. 58 (2006) 294-300
2. Pradhan R. Planar anteversion of the acetabular cup as determined from plain nteroposterior radiographs. J. Bone Joint Surg. Br. 81-B (1999) 431-435
3. Della Valle C.J., Kaplan K., Jazrawi A., Ahmed S., and Jaffe W.L. Primary total hip arthroplasty with a flanged, cemented all-polyethylene acetabular component: evaluation at a minimum of 20 years. J. Arthroplasty 19 (2004) 23-26
4. Tannast M., Langlotz U., Siebenrock K.A., Wiese K.M., Bernsmann K., and Langlotz F. Anatomical referencing of cup orientation in total hip arthroplasty. Clin. Orthop. Relat. Res. 436 (2005) 144-150
5. Sellers R.G., Lyles D., and Dorr L.D. The effect of pelvic rotation on alpha and theta angles in total hip arthroplasty. Contemp. Orthop. 17 (1988) 67-70
6. Jaramaz B., Nikou C., Levison T.J., DiGioia III A.M., and Labarca R.S. CupAlign: computer-assisted postoperative radiographic measurement of acetabular components following total hip arthroplasty. Proceedings of the 2nd International Conference on Medical Image Computing and Computer-Assisted Intervention (MICCAI 1999). LNCS 1679 (1999) 876-882
7. Larose D., Cassenti L., Jaramaz B., Moody J.E., Kanade T., and DiGioia A.M. Post-operative measurment of acetabular cup position using X-ray/CT registration. Proceedings of the 3rd International Conference on Medical Image Computing and Computer-Assisted Intervention (MICCAI 2000). LNCS 1935 (2000) 1104-1113
8. Blendea S., Eckman K., Jaramaz B., Levison T.J., and DiGioia A.M. Measurements of acetabular cup position and pelvic spatial orientation after total hip arthroplasty using computed tomography/radiography matching. Comput. Aided Surg. 10 (2005) 37-43
9. Jaramaz B., and Eckman K. 2D/3D registration for measurement of implant alignment after total hip replacement. Proceedings of the 9th International Conference on Medical Image Computing and Computer-Assisted Intervention (MICCAI 2006), vol. II. LNCS 4191 (2006) 653-661
10. Penney G.P., Edwards P.J., Hipwell J.H., Slomczykowski M., Revie I., and Hawkes D.J. Postoperative calculation of acetabular cup position using 2D-3D registration. IEEE T. Biomed. Eng. 54 (2007) 342-1348
11. Jaramaz B., DiGioia III A.M., Blackwell M., and Nikou C. Computer assisted measurement of cup placement in total hip replacement. Clin. Orthop. Relat. Res. 354 (1998) 70-81
12. Langlotz U., Grützner P.A., Bernsmann K., Kowal J., Tannast M., Caversaccio M., and Nolte L.-P. Accuracy considerations in navigated cup placement for THR. Proc. Inst. Mech. Eng. [H] 221 (2007) 739-753
13. Zheng G., Steppacher S., Zhang X., and Tannast M. Precise estimation of postoperative cup alignment from single standard X-ray radiograph with gonadal shielding. Proceedings of 2007 International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI 2007), Part II. Springer. LNCS 4792 (2007) 951-959
14. B. The, Digital radiographic peroperative planning and postoperative monitoring of total hip replacements-techniques, validation and implementation, Doctoral dissertations, University Medical Center Groningen, the Netherlands, 2006.
15. The Visualization Toolkit, http://www.vtk.org/.
16. Coin3D, 3D graphics development tools, http://www.coin3d.org/.
17. Lorensen W.E., and Cline H.E. Marching cubes: a high resolution 3D surface construction algorithm. Comput Graph (1987) 163-169
18. Zheng G., Marx A., Langlotz U., Widmer K.-H., Buttaro M., and Nolte L.-P. A hybrid CT-free navigation system for total hip arthroplasty. Comput Aided Surg 7 (2002) 129-145
19. Murray D.W. The definition and measurement of acetabular orientation. J. Bone Joint Surg. Br. 75-B (1993) 228-232
20. Gao X.-S., Hou X.-R., Tang J., and Cheng H.-F. Complete solution classification for the perspective-three-point problem. IEEE T Pattern Anal Machine Intell 25 (2003) 930-943
21. Wunsch P., and Hirzinger G. Registration of CAD-models to image by iterative inverse perspective matching. Proceedings of the 1996 International Conference on Pattern Recognition (1996), ICPR 78-83
22. Zheng G., Zhang X., Jonić S., Thévenaz P., Unser M., and Nolte L.-P. Point similarity measures based on MRF modeling of difference images for spline-based 2D-3D rigid registration of X-ray fluoroscopy to CT images. Proceedings of the 3rd International Workshop on Biomedical Image Registration. WBIR. LNCS 4057 (2006) 186-194
23. Jonić S., Thévenaz P., Zheng G., Nolte L.-P., and Unser M. An optimized spline-based registration of a 3D CT to a set of C-Arm images. Int. J. Biomed. Imaging (2006) 1-12 10.1155/IJBI/2006/47197
24. Steppacher S., Tannast M., Zheng G., Zhang X., Kowal J., and Murphy S.B. HipMatch: a 2D-3D machining software-accurate and reliable. 21st Annual Congress of the International Society for Technology in Arthroplasty. Seoul, Korea, October 1-4 (2008)
25. S. Steppacher, M. Tannast, G. Zheng, X. Zhang, J. Kowal, S.B. Murphy, Validation of a new method for determination of cup orientation in THA, J. Orthop. Res., submitted for publication.
26. Zheng G., Gonzalez Ballester M.A., Styner M.A., and Nolte L.-P. Reconstruction of patient-specific 3D bone surface from 2D calibrated fluoroscopic images and point distribution model. Proceedings of the 9th International Conference on Medical Image Computing and Computer-Assisted Intervention (MICCAI 2006), vol. I. LNCS 4190 (2006) 25-32