Postoperative calculation of acetabular cup position using 2-D-3-D registration

IEEE Transactions on Biomedical Engineering

Volumn 54, Issue 7, 2007, Pages 1342-1348

  Penney, Graeme P ^a,b   Edwards, Philip J ^a,c   Hipwell, John H ^b   Slomczykowski, Mike ^d   Revie, Ian ^d   Hawkes, David J ^b  

^a KING'S COLLEGE LONDON   (United Kingdom)

^b UNIVERSITY COLLEGE LONDON   (United Kingdom)

^c IMPERIAL COLLEGE LONDON   (United Kingdom)

^d DePuy International   (United Kingdom)

Author keywords

2 D 3 D registration; Cup anteversion; Implant position

Indexed keywords

COMPUTER AIDED ANALYSIS; COMPUTERIZED TOMOGRAPHY; IMAGE REGISTRATION; PATIENT MONITORING; X RAY SPECTROSCOPY;

2-D-3-D REGISTRATION; CUP ANTEVERSION; IMPLANT POSITION;

IMPLANTS (SURGICAL);

ACETABULUM; ARTICLE; COMPUTER ASSISTED TOMOGRAPHY; HIP PROSTHESIS; HUMAN; IMAGING SYSTEM; MATHEMATICAL COMPUTING; PELVIS; THREE DIMENSIONAL IMAGING; X RAY;

ACETABULUM; ARTHROPLASTY, REPLACEMENT, HIP; HIP PROSTHESIS; HUMANS; IMAGING, THREE-DIMENSIONAL; POSTOPERATIVE CARE; RADIOGRAPHIC IMAGE ENHANCEMENT; RADIOGRAPHIC IMAGE INTERPRETATION, COMPUTER-ASSISTED; SUBTRACTION TECHNIQUE; TOMOGRAPHY, X-RAY COMPUTED;

EID: 34250758507     PISSN: 00189294     EISSN: None     Source Type: Journal    
DOI: 10.1109/TBME.2007.890737     Document Type: Article

References (35)

1. T. Nishii, N. Sugano, H. Miki, T. Koyama, M. Takao, and H. Yoshikawa, "Influence of component positions on dislocation," J. Arthroplasty, vol. 19, no. 2, pp. 162-166, 2004.
2. B. M. Jolles, P. Zangger, and P.-F. Leyvraz, "Factors predisposing to dislocation after primary total hip arthroplasty," J. Arthroplasty, vol. 17, no. 3, pp. 282-288, 2002.
3. D. E. McCollum and W. J. Gray, "Dislocation after total hip arthroplasty," Clin. Orthop. Relat. Res., vol. 261, pp. 159-170, 1990.
4. S. A. Paterno, P. F. Lachiewicz, and S. S. Kelly, "The influence of patient-related factors and the position of the acetabular component on the rate of dislocation after total hip replacement," J. Bone Joint Surg. (Am.), vol. 79-A, pp. 1202-1210, 1997.
5. F. Pierchon, G. Pasquier, A. Cotten, C. Fontaine, J. Clarisse, and A. Duquennoy, "Causes of dislocation of total hip arthroplasty," J. Bone Joint Surg. (Br.), vol. 76-B, pp. 45-48, 1994.
6. M. Yamaguchi, T. Akisue, T. W. Bauer, and Y. Hashimoto, "The spatial location of impingement in total hip arthroplasty," J. Arthroplasty, vol. 15, no. 3, pp. 305-313, 2000.
7. D. M. Hassan, G. H. F. Johnston, W. N. C. Dust, G. Watson, and A. T. Dolovich, "Accuracy of intraoperative assessment of acetabular prosthesis placement," J. Arthroplasty, vol. 13, no. 1, pp. 80-84, 1998.
8. L. P. Amiot and F. Poulin, "Computed tomography-based navigation for hip, knee, and spine surgery," Clin. Orthop. Relat. Res., vol. 421, pp. 77-86, 2004.
9. A. M. DiGioia, III, B. Jaramaz, M. Blackwell, D. A. Simon, F. Morgan, J. E. Moody, C. Nikou, B. D. Colgan, C. A. Aston, R. S. Labarca, E. Kischell, and T. Kanade, "Image guided navigation system to measure intraoperatively acetabular implant alignment," Clin. Orthop. Relat. Res., vol. 355, pp. 8-22, 1998.
10. T. J. Levison, J. E. Moody, B. Jaramaz, C. Nikou, and A. M. DiGioia, III, "Surgical navigation for THR: A report on clinical trials utilising HipNav," in Proc. Medical Imaging Computing and Computer-Assisted Intervention - MICCAI '00, 2000, pp. 1184-1187.
11. W. L. Barger, A. Bauer, and M. Borner, "Primary and revision total hip replacement using the ROBODOC system," Clin. Orthop. Relat. Res., vol. 354, pp. 82-91, 1998.
12. B. Jaramaz, C. Nikou, T. J. Levison, A. M. DiGioia, III, and R. S. LaBaraca, "Cup align: Computer assisted postoperative radiographic measurement of acetabular components following total hip arthroplasty," in Proc. Medical Imaging Computing and Computer-Assisted Intervention - MICCAI '99, 1999, vol. 1679, pp. 876-882.
13. R. Nabeyama, S. Matsuda, H. Miura, T. Mawatarim, T. Kawano, and Y. Iwamoto, "The accuracy of image-guided knee replacement based on computed tomography," J. Bone Joint Surg. (Br.), vol. 86-B, pp. 366-71, 2004.
14. T. G. Goergen and D. Resnick, "Evaluation of acetabular anteversion following total hip arthoplasty: Necessity of proper centring," Br. J. Radiol., vol. 48, pp. 259-260, 1975.
15. K. Herrlin, H. Pettersson, and G. Selvik, "Comparison of two- and three-dimensional methods for assessment of orientation of the total hip prosthesis," Acta Radiologica, vol. 29, pp. 357-361, 1988.
16. D. LaRose, L. Cassenti, B. Jaramaz, J. Moody, T. Kanade, and A. DiGioia, "Post-operative measurement of acetabular cup position using X-ray/CT registration," Proc. Medical Imaging Computing and Computer-Assisted Intervention - MICCAI '00, pp. 1104-1113, 2000.
17. P. J. Edwards, G. P. Penney, M. Slomczykowski, and D. J. Hawkes, "Accurate measurement of hip and knee prosthesis placement from postoperative X-rays," in Proc. 2nd Annu. Meeting Int. Soc. for Computer Assisted Orthopaedic Surgery, 2002, pp. 69-71.
18. S. Blendea, K. Eckman, B. Jaramaz, T. J. Levison, and A. M. DiGioia, III, F. Langlotz, B. L. Davies, and S. D. Stulberg, Eds., "Measurements of acetabular cup alignment after total hip arthroplasty using CT/X-ray matching," in Proc. 4th Annu. Meeting Int. Soc. for Computer Assisted Orthopaedic Surgery, 2004, pp. 54-55.
19. K. Eckman, A. B. Mor, B. Jaramaz, and A. M. DiGioia, III, "Xalign validation: Accurately recovering implant pose from a single AP radiograph," in Proc. 51st Annu. Meeting Orthopaedic Research Society, 2005, Poster No: 1612.
20. D. W. Murray, "The definition and measurement of acetabular orientation," J. Bone Joint Surg., pp. 228-232, 1993.
21. J. D. Visser and J. G. Konings, "A new method for measuring angles after total hip arthroplasty," J. Bone Joint Surg. (Br.), vol. 63-B, pp. 556-559, 1981.
22. M. K. Ackland, W. B. Bourne, and H. K. Uhthoff, "Anteversion of the acetabular cup," J. Bone Joint Surg. (Br.), vol. 68-B, pp. 409-413, 1986.
23. K.-H. Widmer, "A simplified method to determine acetabular cup anteversion from plain radiographs," J. Arthoplasty, vol. 19, no. 3, pp. 387-390, 2004.
24. A. Jain, R. Kon, Y. Zhou, and G. Fichtinger, "C-arm calibration - Is it really necessary?," in Proc. Medical Imaging Computing and Computer-Assisted Intervention - MICCAI '05, 2005, pp. 639-646.
25. W. Schroeder, K. Martin, B. Lorensen, L. Avila, R. Avila, and C. Law, The Visualization Toolkit: An Object-Oriented Approach to 3-D Graphics. Upper Saddle River, NJ: Prentice-Hall, 1997.
26. G. P. Penney, J. Weese, P. G. Batchelor, D. L. G. Hill, and D. J. Hawkes, "Validation of a two- to three-dimensional registration algorithm for aligning preoperative CT images and intraoperative fluoroscopy images," Med. Phys., vol. 28, no. 6, pp. 1024-1032, 2001.
27. J. H. Hipwell, G. P. Penney, T. C. Cox, J. V. Byrne, and D. J. Hawkes, "2-D-3-D intensity based registration of DSA and MRA - A comparison of similarity measures," in Proc. Medical Imaging Computing and Computer-Assisted Intervention - MICCAI '02, 2002, pp. 501-508.
28. J. V. Byrne, C. Colominas, J. Hipwell, T. Cox, J. A. Noble, G. P. Penney, and D. J. Hawkes, "Assessment of a technique for 2-D-3-D registration of cerebral intra-arterial angiography," Br. J. Radiol., vol. 77, pp. 123-128, 2004.
29. P. J. Besl and N. D. McKay, "A method for registration of 3-D shapes," IEEE Trans. Pattern Anal. Mach. Intell., vol. 14, no. 2, pp. 239-256, Feb. 1992.
30. W. E. Lorensen and H. E. Cline, "Marching cubes: A high resolution 3-D surface reconstruction algorithm," Comput. Graphic., vol. 21, no. 4, pp. 163-169, 1987.
31. C. Studholme, D. L. G. Hill, and D. J. Hawkes, "An overlap invariant entropy measure of 3-D medical image alignment," Pattern Recognit., vol. 32, pp. 71-86, 1999.
32. M. Holden, D. L. G. Hill, E. R. E. Denton, J. M. Jaroz, T. C. Cox, T. Rohlfing, J. Goodey, and D. J. Hawkes, "Voxel similarity measures for 3-D serial MR brain image registration," IEEE Trans. Med. Imag., vol. 19, no. 2, pp. 94-102, Feb. 2000.
33. D. M. Hassan, G. H. F. Johnston, W. N. C. Dust, G. Watson, and D. Cassidy, "Radiographic calculation of anteversion in acetabular prostheses," J. Arthroplasty, vol. 10, no. 3, pp. 369-372, 1995.
34. M. Viceconti, R. Lattanzi, B. Antonietti, S. Paderni, R. Olmi, A. Sudanese, and A. Toni, "CT-based surgical planning software improves the accuracy of total hip replacement preoperative planning," Med. Eng. Phys., vol. 25, pp. 371-377, 2003.
35. N. Sugano, K. Ohzono, T. Nishii, K. Haragughi, T. Sakai, and T. Ochi, "Computed-tomography-based computer preoperative planning for total hip arthroplasty," Comput. Aided Surg., vol. 3, no. 6, pp. 320-324, 1998.